Reviews Injection Valve

Premier Whole House AIO Air Injection Oxidizing Well Water Filter System Fleck 2510SXT 10T-FE | Removes Iron Sulfur and Manganese

  • Perfect for Well Water: Filtration with Air injection Oxidizing Whole House Water System.
  • System is equipped with a Fleck SXT air injection control valve, 1” by-pass valve (or 3/4" by request), black Structural mineral tank and all....
  • Can remove up to 8 ppm Hydrogen Sulfide and up to 7 ppm Iron. A daily backwash will remove accumulated iron and replenish the filter media bed. The....
  • Lower required backwash flow rates and less frequent backwash frequency reduces the amount of water used by the backwash cycle..
  • Easy to install system offers air injection, oxidation, and contaminant removal all within a single tank. This minimizes space requirements, reduces....
Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

  • Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
  • Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
  • Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
  • Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

Shower System, Shower Faucet Sets Complete with Wall Mounted Shower Fixtures Rough-In Valve Body and Trim Kit (Brushed Nickel)

  • SHOWER KIT INCLUDE：8 inch square rain shower head (Brass), handheld shower (Brass), 16 inches shower arm (Brass), 59 inches shower hose (304 stainless steel), shower holder (brass) and Shower Faucet Rough-in Valve Body (brass).
  • 3-FUNCTION WITH ONE SWITCH: Select between 10" large square overhead shower and hand shower separately or choosing overhead shower+hand shower simultaneously (choose among 3 shower settings with ONE SWITCH). Our shower valve comes with built-in diverter. Ceramic disc diverter valve provides smooth and easy function-switching operations..
  • Air Injection Technology - Save up to 30% on water with the innovative air injection technology, which is also ideal for noise reduction. The water and air mixture is a perfect solution for areas with low water pressure!.
  • Easy to Replace any Shower Trim Kit: flexibility is the big benefit of the universal valve. Once the Rough is installed, future shower function upgrades or style changes can easily be made without altering the Plumbing behind the wall..
  • Any problem with product,pls feel free to contact us. Within 2 years, any product quality problem can be guaranteed free of charge..
Check Stock

Taylor Made Products 61149 Tuff End Inflatable Vinyl Boat Buoy, Orange, 18 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61155 Tuff End Inflatable Vinyl Boat Buoy, Orange, 27 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61152 Tuff End Inflatable Vinyl Boat Buoy, Orange, 21 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 1146 Tuff End Inflatable Vinyl Boat Buoy, White, 15 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 1140 Tuff End Inflatable Vinyl Boat Buoy, White, 9 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock