Reviews Industrial Iot Board

Arducam IoTai ESP32 CAM WiFi Bluetooth for Arduino UNO, PSRAM Development Board with Camera Module OV2640

  • Arducam IoTai is based on ESP-32S module, uses onboard 4MByte PSRAM and 2MP OV2640 camera module, which makes it possible to capture and process the image..
  • Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, supports both Arduino IDE and ESP-IDF software development tools, and keeps the same form of factors and pin-out as the standard Arduino UNO R3 board..
  • Powered by micro USB or lithium battery, supports lithium battery recharging..
  • The onboard camera interface can directly connect most of the parallel port cameras like OV2640, OV7670, OV7725 and etc. This board can also work with Arducam multi camera adapter (ASIN: B07TYL36MC), which makes this board can connect multiple SPI cameras (up to 4)..
  • Supports face detection and recognition in low frame rate, supports three low power wake-up modes, very suitable for home security, industrial wireless control and other IoT applications..
Check Stock

OSOYOO Smart House IoT Starter Kit for Arduino MEGA2560,Learning STEM Electronic Engineering Coding Programming, DIY Home Automation Building Set for Teens Adults

  • ... control devices.please download it by searching 'OSOYOO iot udp robot car app' from Apple Store or Google Play Store(Android device)..
  • INCLUDES EVERYTHING YOU NEED: Includes Everything You Need To Build & Engineer Your IoT Home Kit: Wooden House Model, OSOYOO MEGA2560 Board, MEGA IoT Extension Board with an ESP12s wi-fi module, and various home automation devices: RFID, Flame Detection Modules,LED, Temperature & Humidity, PIR Motion Ultrasonic, Micro Servo Motor, 1602 I2C LCD Module, Button Modules, RGB Photosensitive, Buzzer, PnP Jumpers, Cables, & More..
Check Stock

Arduino MKR WAN 1310 [ABX00029]

  • The perfect IoT node and building block for adding to Lo-Ra connectivity to low power wide area IoT devices.
  • Very long battery life - the latest low power architecture means the power consumption is able to go as low as 104uA for extended battery life. It is also possible to use the USB port to supply power (5V) to the board, so you can run the board with or without batteries.
  • Local storage - On board 2MByte Flash to facilitate data logging and Over-The-Air (OTA) functions.
  • Enhanced Security - credentials and certificates are stored in the boards crypto chip, an embedded secure element.
  • Powerful - The MKR WAN1310 is based on the Atmel SAMD21 microcontroller and a Murata CMWX1ZZABZ Lo-Ra module.
Check Stock

SpeedTalk Mobile IoT SIM Card M2M with 12 Months Service at 64kbps | 2G/3G/4G Devices | No Contract | Data SIM | Worldwide Coverage

  • $12/year | 1MB included @64kbps | No SMS | No Voice.
  • Connect IoT(Internet of Things) /M2M (Machine to Machine) devices to the cloud securely in minutes..
  • Full device and network control via console or API..
  • Available 2G, 3G, 4G, 5G LTE, CAT-M, NB-IoT LTE 4G LTE connectivity, SIM cards are Triple cut to fit any device or industrial SIM cards..
  • Ideal for fast prototyping and full-scale deployment. Optimized for IoT/M2M data..
Check Stock

SparkFun IoT RedBoard - ESP32 Development Board -ESP32 WROOM MCU Module USB-C Connector Qwiic Connector MicroSD Card -ESP32 Dimensions: 2.3in x 2.7in x 1.08in

  • The IoT RedBoard is an ESP32 WROOM-equipped development board that has everything you need in an Uno with extra perks like USB-C, Qwiic, and more..
  • IoT RedBoard Features: CPU and On­Chip Memory. ESP32-D0WD-V3 embedded, Xtensa dual-core 32-bit LX6 microprocessor, up to 240MHz. 448KB ROM. 520KB SRAM. 16KB SRAM in RTC.
  • Also Features: Wi­Fi, 802.11b/g/n. Bit rate: 802.11n up to 150Mbps. A-MPDU and A-MSDU aggregation. 0.4µs guard interval support. Center frequency range of operating channel: 2412 ~ 2484MHz..
  • We've included 3.3V voltage translation and a Qwiic connector to the edge of the board to allow for quick and seamless connection to our ever-growing line of I2C based Qwiic products. The board even includes a microSD socket if your application requires you to log and save data to a memory card..
  • The IoT RedBoard can target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding..
Check Stock

OSOYOO WiFi Internet of Things Learning Kit for Arduino | Include ESP8266 WiFi Shiled | Smart IOT Mechanical DIY Coding for Kids Teens Adults Programming Learning How to Code

  • Innovation, keep pace with the times :Add Build on the power of Blynk to configure smart home automation and build exciting IoT project.
  • Programmable learner kit for beginners and professionals: Perfect intro to programmable electronic and IoT robotics..
  • Wifi programming and control: With ESP8266 WIFI Shield , you can remote control programming and the sensors.Learn the basics behind the Internet of Things, build your own connected devices..
  • Creative IoT Projects:This kit Includes Everything You Need To Build and Engineer Your Own smart home: WiFi Shield, Basic Board for Arduino, PIR motion sensor, Ultrasonic Sensor , Servo Motor, sound sensor, Obstacle Sensors, Buzzer Sensor Module, Photoresistor, Temperature/Humidity sensor, BMP180,Water detection sensor ,gas Sensor ,relay,Resistors package.
  • Simple ,intelligent: Control your IOT System by Android and iOS App,Sample code are straight forward. free IoT service on OSOYOO website..
Check Stock

ideaspark 3pcs ESP8266 NodeMCU CH340 ESP-12E WiFi Wireless Internet Development Board Serial Module with Micro USB Cable Works Great for Arduino IDE

  • Package List: 3 x ESP8266 Modules,1 x 9.84inch/0.25m Micro USB Cable,1 x Storage Box.
  • The NodeMCU ESP8266 development board comes with the ESP-12E module containing the ESP8266 chip having Tensilica Xtensa 32-bit LX106 RISC microprocessor. This microprocessor supports RTOS and operates at 80MHz to 160 MHz adjustable clock frequency. NodeMCU has 128 KB RAM and 4MB of Flash memory to store data and programs. Its high processing power with in-built and Deep Sleep Operating features make it ideal for IoT projects.
  • The NodeMCU Development Board can be easily programmed with Arduino IDE since it is easy to use.Works greate with Arduino/Mongoose IoT/Micropython.
  • CH340 replace CP2012 USB to UART Bridge ,provides a better performance plug and play interface solution and easier programming. Use the search engine Google.com or Bing.com earch for the keyword r "CH340 driver", it is very easy to find the driver installer.
  • Applications:Access points portals,IoT projects,Wireless data logging,Used in learning the networking fundamentals,Sockets and smart bulbs,Smart home automation....
Check Stock

Nelawya 5.8dBi LoRa Antenna N Type Male LoRawan Antenna for RAK MNTD V2 Nebra Bobcat Sensecap Helium Hotspot Miners Grey

  • Frequency Range:902MHz - 928MHz. Gain:5.8dBi.
  • Ultra Low Loss Cable:3 Meter(10ft) Long N Female to RP-SMA Male Low Loss KMR200 Cable Allowing Install The Antenna indoor/outdoor.
  • Industrial Grade Construction Design, Quality Build and Durable Fiberglass Finish Make it More Suitable for All-Weather Operation. Built-in Pure Copper Oscillator for Performance Ultra Distance Signal Transmission..
  • Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.. Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems..
Check Stock

Stemedu ESP32-CAM ESP32 Camera Module WiFi + Bluetooth Dual Cores Development Board for Arduino with 2.4GHz Antenna, Built-in 520 KB SRAM, External 4M PSRAM

  • Authentic ESP32-CAM from Ai-Thinker. Tutorial link is Document link https://randomnerdtutorials(DOT)com/?s=ESP32-CAM.
  • ESP32 only needs a few peripheral devices to achieve powerful processing performance, reliable security performance, and WiFi Bluetooth function. It is an ideal solution for IoT applications.
  • Support OV2640 and OV7670 cameras, built-in flash. Support TF card, max capacity is 4G.
  • Applications : ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications..
  • How to email us? Please click ¡°Stemedu¡±(you can find "Sold by Stemedu" under Buy Now button), in the new page, click ¡°Ask a question¡± to email us.
Check Stock

10 Port USB 3.1 Gen I Hub 5Gbps - 19 Inch 1U Rack Mount

  • Industrial USB 3.1 Gen I hubs for instant USB expansion.
  • Rugged 1U 19″ Rack Mountable enclosure.
  • 10x Downstream 5Gbps USB3.1 Gen 1 ports for data transfer.
  • 1U server cabinet mounting design, best for Server, IOT applications, Industrial Control and USB storage device data replication.
Check Stock