Reviews Indexable Drill Inserts

[ELEPHAS] Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt planer Original DW735-OEM

  • This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead..
  • Reduced noise and tear-out, produce much smoother finish on difficult woods..
  • The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead..
  • The indexable inserts allows you to rotate it if one knife edge is dull or nicked..
  • Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches.
Check Stock

Soul Summit

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The....
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much....
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4....
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high....
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached....
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

5 PC 3/8'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • 5 PC 3/8'' indexable carbide insert turning tool bit set + 10 PC carbide tip combo.
  • 5 PC 3/8'' indexable carbide insert turning tool bit set specs:Shank Diameter: 3/8".
  • AL/AR Style 0 degree Lead, BL/BR Style 15 degree Lead, E Style 30 degree Lead.
  • 10 PC 3/8'' Inserts TCMT 2151 specs:Case overall dimension: 1-1/2''L x 3-3/4''W x 1/2''H.
  • Quantity: 1 set (5 pcs 3/8'' indexable carbide turn tool bit set + 10 pc carbide tips).
Check Stock

G0945 6" Benchtop Jointer

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer..
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods..
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4 sides are out of use..
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence..
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. Fit fo....
Check Stock

ELEPHAS- 15' planer woodworking spiral cutterhead 15 inch 4 rows 52 inserts

  • "Our Feature and Patent： The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer.".
  • "Durable Materials： Our products are made of Tungsten Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods".
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4 sides are out of use.".
  • "Excellent quality： We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence. ".
  • Including tool kit: two bearings: 6204+6205/ 10 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. If you have any questions, please provide the brand and model..
Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

  • Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
  • Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
  • When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
  • Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
  • Used for slotting and peripheral milling.
Check Stock

ELEPHAS - 6 Woodworking Tool Spiral Cutter head and Helical cutterhead for jointer 4 rows 20 inserts

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The....
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much....
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4....
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high....
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached....
Check Stock

ELEPHAS - 8' Woodworking Tool Spiral Cutter head and Helical cutterhead for jointer, 4 rows 28 inserts

  • “Our Feature and Patent： The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer.”.
  • “Durable Materials： Our products are made of Tungsten Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods”.
  • If one knife edge is dull or nicked, simply rotate to another edge. You’ll only need to replace one insert when all 4 sides are out of use.”.
  • “Excellent quality： We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence. “.
  • Including tool kit: two bearings: 6204+6204/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. If you have any questions, please provide the brand and model..
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock