Reviews Indexable Slotting Cutters
OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts
- Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
- Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
- When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
- Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
- Used for slotting and peripheral milling.
Check StockWhiteside 6700A Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing by Whiteside
- Whiteside Slotting Cutter 6700A: 5/16"B, 0.062"CL, 3-WING.
- Slotting cutters create a small slot in your project for various uses..
- Made from solid alloy steel and micro-grain carbide..
- Precision ground for proper balance at high RPM..
- 6700A Whiteside Carbide Tipped Slotting Cutter 1-7/8CD 1/16CL 5/16Bore 3Wing.
Check StockWEN CH4704 18.5-Inch Indexable Wood Turning Chisel with Four Carbide Cutter Tips
- Always sharp: indexable 6-inch gouge bar allows for easy tip installation and changes.
- Includes four different shapes of carbide cutter tips: round, square, diamond, and arc.
- Form-fitted 12-inch wooden handle crafted from durable African coralwood.
- Easily replace a dull chisel tip with a set of WEN CH016R Indexable Cutters.
- The perfect woodworking accessory for the WEN Wood Lathe Series.
Check StockFreud 60-120 Slotting Cutter Arbor with 1/4 shank carbide height
- Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/4", Stud Height 1".
- The perfect complement to Freud's Slotting Cutters.
- Compatible with any slotting cutter with a 5/16" bore.
- Use in hand-held or table-mounted routers.
Check StockFreud 60-122 Slotting Cutter Arbor
- Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/2", Stud Height 1".
- The perfect complement to Freud's Slotting Cutters.
- Compatible with any slotting cutter with a 5/16" bore.
- Use in hand-held or table-mounted routers.
Check StockFreud 60-102 Slotting Cutter Arbor with 1/2 Shank
- Specs: Arbor Dia. 5/16", Arbor Height 25/64", Bore Dia. 2-3/8", Shank Dia. 1/2", Stud Height 1".
- The perfect complement to Freud's Slotting Cutters.
- Compatible with any slotting cutter with a 5/16" bore.
- Use in hand-held or table-mounted routers.
Check StockGBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)
- ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
- ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting,HRC15°-55°.
- ☞ Advantage:High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
- ☞Material : Made from alloy steel hardened to HRC 52-56 ,90° Cutting angle ,Screw down insert.
- ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check StockGBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)
- ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting,HRC15°-55°.
- ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
- ☞Material : Made from alloy steel hardened to HRC 52-56 ,90° Cutting angle ,Screw down insert.
- ☞ Advantage:High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
- ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check StockGBJ Face Mill Milling Holder End Mill Milling Shell Cutter with 10pcs APMT1604PDER R0.8 with BT40 FMB22-45L Shank Face Mill Arbor BAP400R 50-22-4T 50mm/1.96\ (Milling Cutter+10 Inserts+Arbor)
- ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
- ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting,HRC15°-55°.
- ☞ Advantage:High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
- ☞Material : Made from alloy steel hardened to HRC 52-56 ,90° Cutting angle ,Screw down insert.
- ☞Package: 1x BT40-FMB22-45L +1× BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check StockBOSCH 92813C 5/16 In Arbor for Slotting Cutters
- Compatible with cutters 85526M, 85527M, 85528M, 88829M, and 92837.
- Recommended for use with a routing guide.
- May be used with router table for production work.
Check Stock