Reviews Icarsoft Cr Pro

Upgraded 4PCS Creality 3D Printer Aluminum Hand Twist Leveling Nut Hot Bed Die Springs for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/Pro, CR-10/ CR10S/10S Pro/ CR 20 3D Printer

  • Durablility: These leveling nuts are made of premium aluminium alloy, rust and corrosion resistance, which have a longer lifespan than your plastic nuts. these red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20..
  • Upgraded Design: Metal nut is more powerful and can be twisted more tightly than plastic nuts and the torque of these nuts is large, making it easier to fine tune the hot bed..
  • Compatility: Apply for 3D printer hot bed/ platform. these nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 plus/ 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S Pro, CR-10 plus, CR-X, CR 20..
  • Note: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You have to cut the springs or adjust the hot bed height..
  • Professional Customer Support: If you have any problem or question ablout our product, please feel free to contact us. Our professional customer service team will assist you..
Check Stock

iCarsoft Auto iCarsoft M900 V2.0 Mercedes-Benz Diagnostic Scan Tool Sprinter Scanner Smart Code Reader Airbag Scan,Oil Reset etc

  • iCarsoft M900 V2.0 scanners mainly works on OBD II Mercedes. M900 V2.0 can work for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin adapter for conversion. iCarsoft Benz 38 pin socket in black is for engine only, and the red one is for multi-system.
  • iCarsoft M900 V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

Professional Multi-System Auto Diagnostic Tool iCarsoft MB V2.0 Compatible for Mercedes-Benz / Sprinter / Smart, ABS SRS Oil BLD INJ

  • iCarsoft MB V2.0 scanners mainly works on OBD II Mercedes. MB V2.0 can work on engine system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin black adapter for conversion. MB V2.0 can work on multi-system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin red adapter for conversion..
  • iCarsoft MB V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

iCarsoft i950 Fiat/Alfa Romeo Vehicle Diagnostic Tool, Multi-System Scanner Plus Obdii

  • If you have any questions before or after you purchase the products, please visit iCarsoft official website at www.icarsoft.us and contact Technical Support department by email for help. If your vehicle were produced before year 2005 or after year 2014,or if you want to do specific functions, please kindly confirm with us about the compatibility before purchasing !.
  • iCarsoft i950 can do it all-reads and clears trouble codes for Fiat/Alfa Romeo on full systems such as engine, transmission, ABS and airbag etc..
  • Support OBD II/EOBD ten modes of operation full ecu diagnosis test modes include: CANBUS, ISO9141, KWP2000, J1850 etc.. Read & Clear DTCs Read live data stream.
  • OBD II function for all OBD II/EOBD compliant vehicles: I/M Readiness, Data Stream, Freeze Frame, O2 Sensor Test, Evap System Test, Turn off Check Engine Light (MIL)….
  • Lifetime free update Upgrade via USB 2.0 one year warranty Support Multi-language.
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

EDO Tech Car Power Cord for Whistler Radar Laser Detector 78se Cr97 Z11r Z19r Xtr145 Xtr130 5075exs (6.5' Long)

  • Work with any Whistler radar detector 1400 series and higher..
  • For Xtr-105 Xtr-123 Xtr-130 Xtr-135 Xtr-140 Xtr-145 Xtr-150 Xtr-180 Xtr-195 Xtr-220 Xtr-225 Xtr-255 Xtr-260 Xtr-265 Xtr-310 Xtr-312 Xtr-325 Xtr-330 Xtr-335 Xtr-338 Xtr-420 Xtr-425 Xtr-430 Xtr-435 Xtr-438 Xtr-440 Xtr-445 Xtr-475 Xtr-500 Xtr-520 Xtr-538 Xtr-540 Xtr-543 Xtr-550 Xtr-555 Xtr-558 Xtr-560 Xtr-575 Xtr-580 Xtr-585 Xtr-590 Xtr-658 Xtr-690 Xtr-690se Xtr-693se Xtr-695se Xtr-1788 XCS800 Pro58 Pro68 Pro73 Pro78 Pro78se 945euro.
  • Whistler 975 949 948 1125sw 1200 1430 1450 1460 1470 1505 1515 1520 1525 1530 1540 1545 1550 1560 1565se 1580 1585 1595se 1630 1640.
  • De-1650 De-1793SE De-1605 De-1610 De-1655 De-1660 De-1670 De-1670LD De-1675 1710 De-1730c De-1732 De-1733 1734c 1740 De-1743c 1744 De-1745 De-1748 De-1750 1753 De-1758c De-1760 De-1765 De-1763 De-1765 De-1770 De-1773c De-1776 De-1778 De-1780 De-1783 De-1785 De-1790se Srt-30r Srt-35r Cr65 Cr68 Cr70 Cr73 Cr75 Cr80 Cr85 Cr88 Cr90 Cr93 Cr95 Z-19 Z-19r Z-11r Z11r+ Z-15r Z-23r Z-27r Z-31r rlc-100 rlc-250 Lr-300gp.
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

iCarsoft Auto Diagnostic Scan Tool FA V2.0 for Fiat/ALFA Romeo +Oil Reset +EPB+DPF+SAS+ETC+BLD+INJ

  • If you have any questions before or after you purchase the products, please visit iCarsoft official website at www.icarsoft.us and contact Technical Support department by email for help. If your vehicle were produced before year 2005 or after year 2017, please kindly confirm with us about the compatibility before purchasing !.
  • iCarsoft FA V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc..
  • Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System Update free.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

  • Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro.
Check Stock