Reviews Icarsoft Cr Plus

Professional Multi-System Auto Diagnostic Tool iCarsoft MB V2.0 Compatible for Mercedes-Benz / Sprinter / Smart, ABS SRS Oil BLD INJ

  • iCarsoft MB V2.0 scanners mainly works on OBD II Mercedes. MB V2.0 can work on engine system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin black adapter for conversion. MB V2.0 can work on multi-system for chassis 202, 210, 140, 208, 170, 129.
  • and you need to purchase iCarsoft 38 pin red adapter for conversion..
  • iCarsoft MB V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

iCarsoft i950 Fiat/Alfa Romeo Vehicle Diagnostic Tool, Multi-System Scanner Plus Obdii

  • If you have any questions before or after you purchase the products, please visit iCarsoft official website at www.icarsoft.us and contact Technical Support department by email for help. If your vehicle were produced before year 2005 or after year 2014,or if you want to do specific functions, please kindly confirm with us about the compatibility before purchasing !.
  • iCarsoft i950 can do it all-reads and clears trouble codes for Fiat/Alfa Romeo on full systems such as engine, transmission, ABS and airbag etc..
  • Support OBD II/EOBD ten modes of operation full ecu diagnosis test modes include: CANBUS, ISO9141, KWP2000, J1850 etc.. Read & Clear DTCs Read live data stream.
  • OBD II function for all OBD II/EOBD compliant vehicles: I/M Readiness, Data Stream, Freeze Frame, O2 Sensor Test, Evap System Test, Turn off Check Engine Light (MIL)….
  • Lifetime free update Upgrade via USB 2.0 one year warranty Support Multi-language.
Check Stock

iCarsoft Auto Diagnostic Scan Tool FA V2.0 for Fiat/ALFA Romeo +Oil Reset +EPB+DPF+SAS+ETC+BLD+INJ

  • If you have any questions before or after you purchase the products, please visit iCarsoft official website at www.icarsoft.us and contact Technical Support department by email for help. If your vehicle were produced before year 2005 or after year 2017, please kindly confirm with us about the compatibility before purchasing !.
  • iCarsoft FA V2.0 can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc..
  • Support OBD II/EOBD ten modes of operation full ecu diagnosis The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF) Regeneration Control System Update free.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock

Upgraded 4PCS Creality 3D Printer Aluminum Hand Twist Leveling Nut Hot Bed Die Springs for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/Pro, CR-10/ CR10S/10S Pro/ CR 20 3D Printer

  • Durablility: These leveling nuts are made of premium aluminium alloy, rust and corrosion resistance, which have a longer lifespan than your plastic nuts. these red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20..
  • Upgraded Design: Metal nut is more powerful and can be twisted more tightly than plastic nuts and the torque of these nuts is large, making it easier to fine tune the hot bed..
  • Compatility: Apply for 3D printer hot bed/ platform. these nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 plus/ 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S Pro, CR-10 plus, CR-X, CR 20..
  • Note: The springs are around 25mm long, which is longer than ender 3 and ender 3 pro printer springs. You have to cut the springs or adjust the hot bed height..
  • Professional Customer Support: If you have any problem or question ablout our product, please feel free to contact us. Our professional customer service team will assist you..
Check Stock

iCarsoft EU Pro Diagnostic Scan Tool for European Vehicles +Oil Reset +EPB+BMS+DPF+SAS+ETC+BLD+INJ

  • iCarsoft EU Pro works on BMW/Mini/Mercedes Benz/Sprinter/Smart/Audi/VW/Seat/Skoda/Porsche/....
  • iCarsoft EU Pro can do it all-reads and clears trouble codes on all the systems such as engine, transmission, ABS and airbag etc. Support OBD II/EOBD....
  • Oil light/service reset,Electronic Parking Brake (EPB) system maintenance,Steering Angle Sensor (SAS) Calibration,Diesel Particulate Filter (DPF)....
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS....
Check Stock

iCarsoft Multi-System Auto Diagnostic Tool MB V1.0 for Mercedes-Benz/Sprinter/Smart with Oil Reset Black

  • iCarsoft MB V1.0 can do it all-reads and clears trouble codes for Mercedes on all the systems such as engine, transmission, ABS and airbag etc..
  • MB V1.0 can work on engine system for chassis 107, 124, 126, 201.
  • and you need to purchase iCarsoft 38 pin adapter for conversion..
  • Support OBD II/EOBD ten modes of operation full ecu diagnosis Oil light/service reset, battery voltage test.
  • The print data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.
Check Stock

iCarsoft CR Plus NEW VERSION professional universal OBD2 diagnostic scanner for multi brand vehicles

  • If you have any questions before or after you purchase the products, please visit iCarsoft official website at www.icarsoft.us and contact Technical Support department by email for help. If your vehicle were produced before year 2005 or after year 2014, please kindly confirm with us about the compatibility before purchasing !.
  • OBDII diagnostic full function Multiple car models (covering over 40 prevailing models from Asia, America and Europe). Support 4 Systems: Engine, Transmission, ABS, and Airbag..
  • Basic diagnostic functions: read DTCs, clear DTCs, and read data stream Support DTCs help, data stream wave display, history data record and replay Online upgrade, you can download the latest version anytime anywhere..
  • Auto module search Enhanced OBDII Mode 6 Supports vehicles 1996 & newer ( OBDII & CAN ) Retrieves generic P0, P2, P3 & U0 codes, along with manufacturer specific P1, P3 & U1 codes – both permanent & pending.
  • Resets Oil Service Light Brake Pads Reset Steering Angle Sensor Calibration.
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

  • ...This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
  • 【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
  • 【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
  • 【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
  • 【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years, Great for use with any Creality 3D printer..
Check Stock

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock