Reviews Hole Tool

ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

  • ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
  • This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
  • EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
  • Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
  • The pin point is spring-loaded and retracts into handle when punching a hole.
  • Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
  • BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

MMOBIEL Watch Band Leather Strap Wrist Belt Hole Tool Punch Plier Yellow Puncher Vinyl Grip Secure Hold

  • MMOBIEL Watch Band Leather Strap Wrist Watch Strap Belt Hole Tool Punch Plier with Yellow Vinyl Grip for Secure Hold.
  • High quality professional plier: Heavy Duty Chrome Plated Watch Band Leather Strap Wrist Watch Strap Belt Hole Tool Punch Plier with Yellow vinyl Grip....
  • Easy to use: Best Pliers Tool to make precise round Punch hole's diameter: Ø 2,0 mm approx. Pliers length 140mm approx.
  • Compatibility: Can be used to make hole in a variety of Watchbands and Strap materials such as Leather, Plastic Gaskets, Canvas, Paper, Vinyl, Cloth,....
  • High quality: All Parts tested before shipment Item in Stock!.
Check Stock

ABN Power Punch Heavy Duty Hole Punch Set – Metal Hole Punch, Heavy Duty Hole Puncher Hand Punch 3/32in to 9/32in

  • PUNCH HOLES IN YOUR PROJECT: The ABN Hole Punch Tool is a heavy duty punch and dies kit that has a high-leverage design and comfortable grips that allow you to manually create clean holes through sheet metals up to US 16 gauge.
  • For mild sheet steel, aluminum, brass, polyurethane, plastic, canvas, cardboard, paper, shoe.
  • Additionally use as a leather punch, belt hole puncher, metal hole punch for jewelry, and watch hole puncher.
  • Not recommended for stainless steel such as silverware and utensils.
  • PERFECT SIZE: Creates holes that are from 3/32-inch to 9/32-inch in diameter and includes a stop gauge for consistent spacing.
  • 7 sizes of punches and dies include 3/32-inch (2mm), 1/8-inch (3mm), 5/32-inch (4mm), 3/16-inch (4.5mm), 7/32-inch (5.5mm), 1/4-inch (6mm), 9/32-inch (7mm).
  • 1.75-inch (4.4cm) throat depth to punch holes as close as 1.75 inches away from material edge.
  • EASY TO USE: This sheet metal punch uses interchangeable heads to pierce holes in a material of your choosing.
  • Select a proper size punch and die, remove nut near handle using die adjustment tool, move connection bar, place punch on the head of hand punch, rotate nut by again using the adjustment tool to adjust caliper, and set distance between the edge and the hole.
Check Stock

LIFEGOO Leather Hole Punch Tool for Belts Revolving Puncher Plier Kit Includ Ruler,Screwdriver, Brass Pad Heavy Duty Rotary Hole Puncher for Bags, Shoes, Fabric, DIY Home Craft Projects etc …

  • 1.[ Convenient Efficient ] : Leather puncher hole belts tool have fun adjusting your favorite item to fit you perfectly again. Rotating hole punch super easy and fast to use. Choose the size, rotate the wheel, align your item and squeeze. You will save time and money not having to buy new item.puncher belt tool sharp, precise round holes of 2mm, 2.5mm, 3mm, 3.5mm, 4mm and 4.5mm.which is great for crafts hobbyist, DIY or commercial use..
  • 2.[ Widely Applicable ] : Hole punching maker is commonly used for punching round holes in leather, belts, plastic, rubber, canvas, fabric, cardboard, saddles, bags, watch bands, pet collars, store cards ect. Hole punch kit include ruler,one screwdriver and 3 brass pads with a screwdriver ,Leather leathercraft punch hole will help you play professional holes..
  • 3.[ High Quality ] : The durable revolving punch hole tool is made of plated steel that is high hardness, good toughness and durable. rotary punch hole belts surface of metal deal with spray lacquer process to avoid oxidation. Comfortable grip pvc handles designed with non slip gentle cushioning, Ideal for repetitive work.Rotating hole punch pliers bottom ring helps to lock the handles after using for safety and convenient storage..
Check Stock

TICONN Leather Hole Punch Tool Set, Heavy Duty Multi-Size Hole Puncher Tool for Belts, Watch Bands, Plastic, Fabric

  • [PREMIUM QUALITY] TICONN heavy duty leather hole punching tool is made of premium steel which punches clean with fewer burrs and stays sharper for a longer time. The slip-proof ergonomic handle will save you effort working with this leather punch tool..
  • [EASY TO USE] Leather hole punch set is easy to use. Simply unlock the handle, then rotate to select desired hole punch size on the dial until you feel the click. Lastly, just give it a form squeeze to punch at your desired spot..
  • [TOOL KIT COMBO] Our standard hole puncher kit comes with a 6-hole punching plier, a stainless steel ruler, a small file, a screwdriver and 3 spare brass pads..
  • [WIDE APPLICATIONS] Our hole punch can be used on many more materials beyond using as leather tools. It can be used on fabric such as canvas or denim, plastic sheets, rubber, and cardboard. Also a ideal belt hole puncher for leather. You may even use it to punch holes on credit card chips to scrap them.
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please c....
Check Stock

SINGER 01931 Button Magic

  • Easily attach single hole, 2-hole, 4-hole, specialty and shank buttons.
  • Tool contains storage compartment for attachers and buttons.
Check Stock

Singer Button Fast Quick-Fix Button Replacement Tool with 60 Fasteners and 12 Buttons (01933)

  • All new and improved no-sew button replacement tool.
  • Attaches single-hole, 2-hole, and 4-hole buttons. Works with most buttons..
  • Handheld tool with easy press trigger and tethered needle cap for safety.
  • Includes 2 fastener strips of 30 tacks each (1 each black and clear) plus 6 each matching single hole replacement buttons.
  • Only Button Fast fasteners will work with the Button Fast. Replacements sold separately.
Check Stock