Reviews Hole Saw Bit

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

Diamond Drill Bit Tile Hole Saw Set, 16 PCS Hole Core Drill Hole Saw Kit with Adjustable Hole Saw Guide Jig Fixture and Ultimate Triangle Drill Bits Set for Tile, Ceramic, Glass, Porcelain, Marble

  • Diamond Drill Bit Set Various Sizes - Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit. 10 Sizes Diamond hole saw : 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm,made of high-strength carbon steel, the integrated steel structure makes these diamond drill bits more durable. Diameter of triangle bit: 6mm, 8mm, 10mm, 12mm..
  • Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface. Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • Adjustable Fixture - Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is large enough to fit in all size hole saws. Movable ball bearings, two modes (fixing 3 or 4 bearings) are your choice, just flip the board..
  • The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling pro....
Check Stock

Koopi 1-Inch / 25mm BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 1" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • This 1 in hole saw made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
  • Pakage Include: 1 x 1" hole saw (hole saw and arbor are integrated design).
Check Stock

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

VIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal

  • 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
  • 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
  • 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
  • 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
  • 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check Stock

Rannb 90mm/3.5' Hole Saw for Cutting Wood Plywood Laminated PVC Board

  • ⭐【Material】Features heat treated carbon steel alloy hole saw blade, non-binding clean edge design.The blade is sharp with high hardness..
  • ⭐【Dimension】Cutting Dia: 90mm /3.5".
  • ⭐【Application】This Hole Saw Drill Bit is designed for wood / plastic cutting.
  • It can effectively and economically cuts a wide variety of materials including aluminum, iron and wood..
  • ⭐【Convenience】The spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • ⭐【Package Content】1pcs x Shank + 1pcs x Hole Saw + 3pcs x Pilot Drill Bit + 1pcs x Small L Wrench.
Check Stock

10 PCS 2 inch Desk Wire Cord Cable Grommets Hole Cover with Hole Saw Kit High Speed Bi-Metal Holesaw Drill Bits for Office PC Desk Cable Cord Organizer

  • Hole Saw Set: Package includes 10 pcs Desk Wire Cord Cable Grommets, 1pcs 2 inch M42 Bi-Metal hole saw, 1pcs 7/16 inch hex drilling shaft, 3pcs drill bit, and 1pcs M4 Hex wrench..
  • Hole Saw Drill Bit: The hole saw drill bit is made of M42 high-speed steel saw blade for better performance in durability and toughness, the cutter head is pointed and can open holes efficiently..
  • Desk Cable Grommets: Made of quality plastic, good comprehensive performance, wear-resistant, corrosion-resistant, durable to use. Removable cover, with an opening hole sleeve, which can open the hole and clip-on top cover, so if you have a lot of cords, you can use the desk grommet without cover..
  • Easy to Install: Just assemble the hole saw with the included hex wrench and drill the hole where needed, punching a hole first, then place the main part of the grommet directly into the hole, the overall size of grommets measures 2.5 x 0.77 inch (Dia. x H), fitted with the mounting hole diameter is 50 mm/ 2 inch..
  • Wide Application: Desk cord grommet can effective cable and wire management, neatly organize the wires from computer desks, PC peripheral, office equipment, entertainment systems in home, office and school..
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

zerotop Diamond Drill Bits with Hole Saw Guide 16Pcs Hole Saw Set with Triangle Drill Bit Set & Screwdriver Suitable for Ceramic, Glass, Tile, Marble Porcelain

  • 【Durable Material】The diamond hole saw is made of high-temperature sintered industrial-grade carbon steel and has a long service life. It has a nickel-plated coating to resist corrosion, wear resistance, durability. Each hole is smooth and precise surface treatment, and the top is thickened with diamond to achieve excellent cutting strength..
  • 【Large Clearance Hole】The large clearance holes of the drill bit help the cooling water to enter and flush particles such as chips, reducing drilling resistance. When the debris is stuck in the small hole saw, you can use the equipped screwdriver to pull it out to make the drilling process smooth and easy..
  • 【Adjustable Drill Guide】The minimum and maximum opening lengths of the adjustable hole saw guidance fixture is 4mm/0.16in and 84mm/3.3in respectively, which can fix hole saws of any size. The diamond drill bit set has two modes (fixed 3 or 4 bearings) for your choice. You take off the two big nuts and install the chassis in reverse, and install one of the bearings to the center to form a three-bearing..
  • 【Wide Usage】The diamond hole saw drill bit set is very suitable for removing rings on marble, tiles, glass, ceramics, PVC or other materials. It is the excellent choice for your home decoration, D....
Check Stock

6 Inch Hole Saw for Making Cornhole Boards - Heavy Duty Steel - Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game

  • This Hole Saw Drill Bit is designed for wood / plastic cutting. Great for Making Cornhole Boards. Package included: 6” hole saw, mandrel and drill bit work with any 1/2" drills..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic..
  • 6” hole diameter - prefect size for Corn hole board Drilling and no matter what you project like cutting 6” diameter holes through wood and plaster.
  • 7/8" saw blade depth. Pins lock the saw well and prevent Too tight or falling off..
  • With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
Check Stock