Reviews High low Screw

Damaged Screw Extractor Kit, Stripped Screw Extractor Set, Drill Bit Set, Broken Bolt Extractor and Screw Remover Set,Made From H.S.S. 4341#, Set of 6 Pcs Stripped Screw Remover

  • [POWERFUL Stripped Screw Extractor ] : Striped Screw Works with Any Size Screw or Bolt Extractor Removes Even the Most Stubborn Stripped, Damaged, Embedded, Rusted and Painted-over Screws and Bolts.To Use The Grinding Head,The Screw Mouth Neets To Be Polished To A Sufficent Denth. The Greater The Depth, The Faster The Extraction Head Can Extract..
  • [WIDE VERSATILITY]:6 Piece Screw Extractor Set(#0, #1, #2, #2, #3, #4) Works with any Drill and any Size Screw or Bolt. Such as Common Hexagon Bolts, Lag Screws, Wood Screws, Hexagon Socket Screws, Machine Screws, Sheet Metal Screws and Other Screws, This Damaged Screw Extractor can Remove All Common Sizes of Damaged, Stripped or Broken Screws..
  • [HIGH QUALITY HSS 4341 AND TITANIUM PLATED] This Damaged Screw Removal Tool Kit Screw Extractor is Made of HSS 4341 High-Quality Speed, The Hardness is Up to 65 HRC, The Density And Hardness Are About 20% Higher Than The Ordinary Steel in The Market.
  • The Hardness is High, And it is Durable , Any Damaged Screws Can be Easily Removed. And We Plated a Layer of Titanium Extractor on it to Make it not Easy to Rust, Easier to Store, and More Beautiful..
  • [EASY OPERATION] A Damaged Screw Adapter can get the Job Done in Two Simple Steps , Choose a Bit Smaller Than the Damaged S....
Check Stock

CNCCANEN Ballscrew SFU1204-300mm with BK10/BF12 + SBR12-300mm Linear Rail Guide Set SBR12UU Block Bearing Sliding Shaft Rod Kit for CNC Machine DIY

  • High service life time due to low friction.
  • Ball screw diameter:12mm, ball screw pitch:4mm, ball screw length:400mm(15.75 inch).
  • The total length is 400mm and the effective ball screw length is 335mm.
  • Do not remove the ball screw nut from the ball screw, because it is matched, or it will be difficult to install it again.
Check Stock

1/4-20 Brass Push in Threaded Insert 0.5\ Long (50 pcs)

  • 【Premium Quality 】 Used in various low strength materials, which can improve the wear resistance of bolt connections and avoid the damage of thread. The locking type wire screw sleeve can lock the screw into the threaded hole, so that the screw is not loose when subjected to shock vibration, which is better than the normal locking device..
  • 【Effect】 Because of a certain elastic, can make the load on the thread is more even, eliminate the screw and screw hole deviation between the pitch and tooth type, and can absorb vibration, thus increasing the screw thread connection strength and resistance to fatigue strength..
  • 【Material】 Made of high quality Stainless Steel, good corrosion resistance and never rust, durable to use,have a long time..
  • 【Special】 Wear resistant. Used for frequent disassembly, it can greatly improve the life of thread. Anti-loose. Especially for the aircraft and other products requiring high insurance coefficients..
  • 【Easy to maintain】 The damaged screw holes shall be put into the wire screw sleeve , which can be used again to avoid the possibility of damage to the workpiece..
Check Stock

SFU2005 300mm Ballscrew kit + Set BK/BF15 Kit + 2005 Ballscrew RM2005 L300-1000mm ball screw with Ball Nuts + Screw Nut Housing for CNCRouter Machine

  • 【Package Include】- End Machined ballscrew SFU2005-300mm/11.81inch length with nut + BK15/BF15 end support with locknuts and circlips + 2005 Ball nut housing..
  • 【Basic Description】- SFU2005 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK15 and BF15, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 2005 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU2005 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation d....
Check Stock

46mm Low Profile Tripod Head with 3 Screw Adapter 3/8 to 1/4 Professional Aluminium 360 Rotating Panoramic Ball Head Max Loading 44lbs/20kg

  • ... and Hollowed out quick release plate clip, 0.1 mm machining tolerance, anodic anodized, ultra high strength aviation aluminum alloy. It’s solid, stable and high quality.
  • 【WIDE COMPATIBILITY】: The ball head can be used with tripod, monopod,camera slider,for installing camera, DV, mobile phone, telescope. 1/4 " screw quick shoe plate screw and a 3/8 " thread tripod mount screw. Quick release plate compatible with Acra RRs, etc.
  • 【Packing & After-sale】: 1*Low profile Tripod + 3*Screw Adapter 3/8" to 1/4", ☎️we promise 12 months After sales service from the date of purchase. If you have any problems within the quality guarantee period, we will refund or resend. we are always ready to hear your voice (reply within 24hrs).
Check Stock

Oem liftmaster chamberlain Genuine Screw Drive Coupler

  • Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current).
  • Replaces sprocket coupler on screw drive rail assemblies..
  • Compatible with all Liftmaster Screw Drive and Low Profile Screw Drive operators (1995-current), models 1000SD, 2000SD, 1000SDR, 2000SDR, 2110, 2220, and models 4600, 4620, 4640, 9902, PD420, PD460.
Check Stock

2mL Autosampler Vials with Caps, HPLC Vials, 9-425 Amber Glass Vial with Blue Screw Caps/Writing Patch/Graduation, White PTFE & Red Silicone-1000 Pcs

  • 2ml Amber autosampler glass vials with screw caps,12mm Diameter,32mm Height,9-425 screw top. Our vials with caps are widely used in standard HPLC and GC applications. The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Agilent, HTA, Shimadzu, Thermo, Varian, Waters, etc..
  • Autosampler vials with unique screw design ensure the consistency of the seal. Blue polypropylene screw cap including silicon septa and PTFE ideal for compound sample storage in the chemical industry, pharmaceutical industry, and scientific research laboratory..
  • 2ml sample vials are made of high-quality borosilicate glass, low content of free ions, low coefficient of expansion, and very high chemical resistance. It is suitable for containing all injectable preparations with acid, neutral and alkaline pH. Temperature range from -76F to 248F..
  • Amber vial with large writing patch for sample identification and white printed graduations in 0.5ml increments..
  • These series of sample glass vials with screw caps are suitable for various automatic samplers for thin neck bottles.Easy to use..
Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 500mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

  • 【Package Include】- End Machined ballscrew SFU1605-500mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
  • 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....
Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 1000mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

  • 【Package Include】- End Machined ballscrew SFU1605-1000mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
  • 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devi....
Check Stock

RATTMMOTOR RM/SFU1605 BallScrew Kit, 350mm Length Ball Screw with SFU1605 Ball Screw Nut+BK/BF12 Ball Screw End Supports+1605 Ball Screw Nut Housing for CNC Machine

  • 【Package Include】- End Machined ballscrew SFU1605-350mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing..
  • 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall quenching treatment, high hardness, abrasion resistance, which is durable..
  • 【End support & Nut Housing】Ball screw vertical end supports BK12 and BF12, built-in deep groove ball bearings and matching lock nuts and snap rings, high precision, corrosion resistance, and 1605 nut housing matching ball screw, simple assembly and convenient installation..
  • 【Main Features】- The ball screw is equipped with a metal deflector single flange ballscrew nuta nd built-in balls, which can easily convert rotary motion into linear motion, with low friction, low noise, and smooth operation. In addition, it is equipped with a dustproof ring, which can prevent dust from entering the nut, which is beneficial to the normal operation of the screw rod..
  • 【Application Areas】- SFU1605 series ball screws are suitable for various scenarios such as lathes, CNC machine tools, machining, mechanical equipment, automation devic....
Check Stock