Reviews High To Low Level

Rockville RBG18S 18' 2000W Active Powered PA Subwoofer W/Dsp+Limiter Pro/DJ

  • ...e-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
  • Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage pr....
Check Stock

Sound Storm Laboratories LOPRO10 10 Inch Powered Under Seat Car Audio Subwoofer - 1200 Watts Max Built-in Amplifier Low Profile Remote Subwoofer Control for Truck Boxes and Enclosures

  • Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Sound Storm EV5000D Car Amplifier – 5000 Watts Max Power 1 Ohm Stable Class D Monoblock MOSFET Power Supply Remote Subwoofer Control

  • POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

Taidacent Non Contact Water Level Sensor Flow Sensor Float Switch Water Level Switch High and Low Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
Check Stock

Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power 2/4 Ohm Stable Class A/B Mosfet Power Supply Remote Subwoofer Control

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is....
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your....
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source....
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will....
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it.
Check Stock

BOSS Audio Systems Elite SLIM10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space

  • ... but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the SLIM10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 13.58” x 10.43” x 3.15”, Weight: 10.45 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We stron....
Check Stock

BOSS Audio Systems BASS10 Amplified Car Subwoofer - Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, for Vehicles Needing Bass with Limited Space, Remote Subwoofer Control

  • ... but also eliminating all secondary feedback circuitry. Efficiency. Increased reliability.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BASS10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the BASS10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 14” x 12.3” x 3.3”, Weight: 11.35 lbs. Phase control. LED status indicator. Thermal, Short and Overload Protection Circuits. High Performance Voice Coil. Rubber Surround. Aluminum Cone.
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly e....
Check Stock

BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer with Passive Radiator, Remote Subwoofer Control

  • ... generally get with a ported box, thus enriching the BASS & making the system more linear.
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”.
  • Low Level Input - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the CUBE10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Specs - Dimensions: 11.22” x 11.22” x 11.22”, Weight: 18.61 lbs..
  • Warranty - BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strong....
Check Stock

8-Inch Low-Profile Amplified Subwoofer System - 600 Watt Compact Enclosed Active Marine Underseat Car Subwoofer with Built in Amp, Powered Car Subwoofer w/Low & High Level Inputs - Pyle PLMRSBA8

  • 600 WATT POWER: Pyle’s 8" Amplified Low Profile Subwoofer System offers a maximum power of 600 watts. It lets you pump out some great low frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system.
  • BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & a control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module.
  • LOW PROFILE: With height of just 3", it's a perfect solution when space is an issue, it can easily fit under the seat of most vehicles! Total dimension is 12.8”x9.5"x3” & includes mounting hardware. A great addition to your marine stereo sound system.
  • HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual.
  • LOW LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal source.
Check Stock

PyleUsa 10-Inch Low-Profile Amplified Subwoofer System - 900 Watt Compact Enclosed Active Marine Underseat Car Subwoofer with Built in Amp Powered Car Subwoofer w/Low & High Level Inputs - PLMRSBA10

  • 900 WATT POWER: 10" Amplified Low Profile Subwoofer System offers a maximum power of 900 watts. It lets you pump out some great low-frequency bass volume to enhance the party vibe making it a great addition to your marine music audio system.
  • BUILT-IN AMPLIFIER: The integrated amp in the compact subwoofer features low pass crossovers & control for adjusting input sensitivity from 0.12V to 3.5V. Includes variable bass boost, control the subwoofer level w/ the remote level control module.
  • LOW PROFILE:With a height of just 3",it's a perfect solution when space is an issue,it can easily fit under the seat of most vehicles!Total dimension is 14.2”x11.2"x3” & includes mounting hardware. A great addition to your marine stereo sound system.
  • HIGH LEVEL INPUT: Speaker line inputs are known as high-level inputs. If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source. Use the supplied cable and connect the outputs properly as shown in the manual.
  • LOW-LEVEL INPUT: Line level inputs, also known as RCA input or low-level inputs. Low-level inputs are the recommended way to introduce the audio signal to the hideaway subwoofer if RCA outputs are present on your head unit or other signal sources.
Check Stock