Reviews Hexagonal Shaft Pulley Adapter

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

  • COLD-ROLLED STEEL: The crank sleeve joint is made of industrial-grade cold-rolled steel, CNC precision processed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
  • STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
  • PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
  • EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch....
Check Stock

X AUTOHAUX 1\ to 1 1/8 Inch -1/4\ Engine Shaft Sleeve Adapter Kit with Step Key for Car

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1" to 1 1/ 8 inch -1/4" diameter. It comes with 2.05" step key..
  • [ ] Made from cold rolled stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Bapmic Mechatronics Sealing Sleeve and Double D Gasket Compatible with BMW E60 E65 E66 E70 E71 E90 335i

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4"to 7/8" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS

  • ...) > Restores proper steering performance to help ensure vehicle control > OE Type Replacement part > Crafted from the strongest materials available | Southwest Speed 1976-1986 Jeep CJ Telescoping Steel Power Steering Shaft (# 150-2861).
  • Southwest Speed 16MM O-Ring Low Pressure Return Hose and 18MM High Pressure Line Adapter Kit (# 150-2178Kit) | 1 High Pressure Line from Pump to Reservoir (# 150-2178) | 3 Feet of Low Pressure Hose Black -6AN (# 927-9586) | 1 Hose clamp (# 940-2059) | 1 90 Degree Return Line Adapter -6an Fitting with hose clamp (# 150-0098).
Check Stock

uxcell Cable Wire Binding Protection Flexible Spiral Tube Wrap Band Black

  • Can also pass through a bearing with an inner diameter of 5mm and use it with other robot parts with matching hexagonal holes, which greatly enhances the load bearing and transmission capacity of the robot parts..
  • High quality stainless steel material, with high hardness, wear resistance and durability, used as a drive shaft accessory for intelligent robots, and also suitable for lathe equipment and engineering equipment..
  • You can use a metal cutting blade to cut the Φ5mm stainless steel hexagonal shaft to your own customized length according to your needs..
  • The Φ5mm stainless steel hexagonal shaft has an outer diameter of 5mm and an appearance of a hex with a plane spacing of 4 mm. It is a perfect combination of a circular shaft with a diameter of 5mm and a hex with a plane spacing of 4 mm. It has the advantages of round shaft and hexagonal shaft..
  • Can be used with other robot parts and accessories with matching hexagonal holes, which can effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the force of the....
Check Stock

Stainless Steel Shaft, Linear Shaft, Mechanical Shaft for Industrial Robot Accessories

  • PRECISE CONNECTION - effectively prevent the parts from rotating and slipping on the hexagonal shaft, so that the parts are more evenly stressed, and the efficiency of the driving force is enhanced..
  • APPLICABLE MATCHING - Circlip groove hexagonal shaft has the advantages of round shaft and hexagonal shaft, and can be used with different hexagonal hole matching robot parts..
  • STAINLESS STEEL MATERIAL - Made of stainless steel material, high hardness, not easy to break, wearproof, durable, long service life, stable performance, to meet your different needs..
  • COMPATIBLE WITH - Can pass through bearings with an inner diameter of 8mm, used in conjunction with robot parts matching hexagonal holes, to enhance load carrying capacity and transmission capacity..
  • THREAD - The hexagonal shaft with spring groove and thread is convenient to limit the axial movement of the bearing in the combination, effectively improving the work efficiency..
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

Genuine MTD 687-02220 Adapter Assembly

  • Brand New - Unused Parts Genuine OEM MTD Product - Made to fit Yard Man, MTD, and Troy-Bilt Products.
  • Includes One (1) Blade Adapter Assembly as pictured.
  • Used on walk-behind mowers Height: 2.85" Inside Diameter: 25mm Pulley Diameter: 2.4".
  • Bow Tie Center Pattern Blade adapter 687-02220 attaches the mower blade to the motor shaft. Disconnect the spark plug wire before replacing this part. Wear work gloves to protect your hands. Part Number: 687-02220, 68702220, 687 02220.
Check Stock

gas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key

  • ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
  • Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
  • ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
  • ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
  • ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..
Check Stock