Reviews Heavy duty Stud Extractor

ARES 70016 - Damaged Bolt and Stud Extractor Tool - Grips and Removes 1/4-Inch to 1/2-Inch Studs - Ideal for Broken, Rounded Off, Painted Over, and Rusted Tight Bolts

  • ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection..
  • MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more..
  • TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you ha....
Check Stock

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • TOOL INTRODUCTION - Damaged bolt extractor 3/8" inch drive. It is suitable for most drive tools and can be used with manual or pneumatic impact wrenches and ratchets as well as adjustable wrenches and flat wrenches. Heat treated alloy steel is very durable and chrome-plated, will not be damaged by high-strength work, and will add lubricant to the internal rotating threads to provide better protection against rust and wear..
  • OPERATIONAL GUIDANCE - Simple operation does not need to be considered. Place the stud extractor on the stud and turn the bottom hex flat nut counterclockwise to tighten the jaws. After the jaws hold the broken bolt or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
Check Stock

Nutrifaster Cutter Plate For N350 And N450 Model 108

  • Fiber & Juice Separated: Designed with 5-grade gear transmission for less power consumption, driven by heavy duty motor. Juice and dregs are separated....
  • Improved Efficiency: 2800 RPM powerful machine. Three stainless steel rollers crushes fruits and vegetables to perfect result. 0.7" (18 mm) large....
  • Convenient Cleaning: Stainless steel juicing net inside the juice extractor. 80° scientific blade tooth won't let fiber remain easily. Net can be....
  • Considerate Design: Two tough buckles link machine body and lid tightly without leakage. Heavy duty base lowers center of gravity and ensures more....
  • Wide Application: Commercial juice extractor, easily juices various kinds of fruits and vegetables according to your own need. Large opening allow....
Check Stock

PANOVOS 8pcs Pipe Screw Extractor Set,Damaged Screw Broken Bolt Water Pipe Remover Set

  • Remove Damaged Screws Bolts And Water Pipe extractor set - These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck....
  • Screw extractor size includes #1 for 1/8"-5/32" , #2 for 5/32"-3/16", #3 for 3/16"-1/4", #4 for 1/4"-5/16", #5 for 5/16"-7/16", #6 for 7/16"-9/16", 7#....
  • 8-piece heavy duty steel extractor，different sizes of screw extractor to meet different needs..
  • It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws,....
  • Reliable Quality- Made from carbon steel and are tempered twice for extra hardness and durability. Works on wood and machine screws, as well as flat,....
Check Stock

BTSHUB 8pcs Damaged and Stripped Screw Extractor Set, Broken Bolt Extractor & Broken Water Pipe Remover Set

  • ☂FUNCTION: These extractors will easily and quickly remove most kinds of damaged, stripped, rusted, broken, or stuck screws, bolts from any wood or metal surface. The new two water pipe extractors, designed for the broken water pipes..
  • ☂RELIABLE QUALITY: Made from carbon steel and are tempered twice for extra hardness and durability. Black oxide finished for durability. It is rustproof and sturdy. Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • ☂THREAD DESIGN: The damaged screw extractor is designed with deep and wide threads for longer service life. 8 screw extractor size includes #1 for 1/8″-5/32″.
  • ☂STORAGE CASE: The broken screw extractor set comes with a durable box to keep these extractors organized, clean, secure, and easy to find..
  • ☂SCREW REMOVING TOOL: 8-piece heavy-duty steel extractor，different sizes of screw extractor to meet different needs. The extractor set is an ideal screw removing tool for household use and professional electrician..
Check Stock

Accessories Unlimited AU320-B Three Foot Under Hood CB Antenna Kit (Black)

  • 16mm diameter mounting bracket hole accept 5/8-inch connectors such as UHF-Female, SO-239 Stud, N-Female and CB Stud 3/8"x 24T..
  • Strong heavy duty stainless steel construction : 1.8mm thick. it's a clearance of around 2 - 2.5 mm between the hood and the fender / mudguard..
  • Fits broomstick, whip, spring mount style CB, UHF & Mobile Phone TV antennas.
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

Disney Lady Plush – Lady and The Tramp – Medium – 11

  • Different Sizes: 8 Pieces heavy duty steel extractor，different sizes of screw extractor to meet different needs..
  • Material: Made from carbon steel and are tempered twice for extra hardness and durability..
  • Application: Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • Advantages: Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings..
  • Other: It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes..
Check Stock

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • ...ion 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each compartment while drill bits and drilling guides include permanently l....
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock