Reviews Stainless Steel Stud Extractor

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • TOOL INTRODUCTION - Damaged bolt extractor 3/8" inch drive. It is suitable for most drive tools and can be used with manual or pneumatic impact wrenches and ratchets as well as adjustable wrenches and flat wrenches. Heat treated alloy steel is very durable and chrome-plated, will not be damaged by high-strength work, and will add lubricant to the internal rotating threads to provide better protection against rust and wear..
  • OPERATIONAL GUIDANCE - Simple operation does not need to be considered. Place the stud extractor on the stud and turn the bottom hex flat nut counterclockwise to tighten the jaws. After the jaws hold the broken bolt or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
Check Stock

Honey Keeper Pro 2 Frame Stainless Steel Honey Extractor Beekeeping Equipment Honeycomb Drum

  • Stainless steel construction: Engineered with rust-proof, heavy-gauge stainless steel, this professional grade honey extractor is ideal for a....
  • Flexible capacity: Designed to be simple to use, the extractor can process two frames at a time, whether they are standard deep, medium, or shallow....
  • Adjustable height: The stainless-steel legs are height adjustable to fit the extractor over most any receptacle. Raise or lower the tank to put the....
  • Complete system: This extractor includes clear lids for viewing the extraction process, sealed bearings and steel gears, and a nylon honey gate to....
  • Easy maintenance: The steel tank is easy to clean with warm soapy water..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock

ABN Universal Stud Bolt Extraction Remover 3/8in Drive – 1/4 to 1/2in 6 to 12mm Studs Metric & SAE Removal Tool

  • EFFORTLESSLY REMOVE ANY STUD: The ABN Universal Stud Bolt Extraction Remover, 3/8” Inch Drive – 1/4” to 1/2" (6mm to 12mm) Studs Metric & SAE....
  • FITS YOUR APPLICATION: Adjustable to fit studs that are 1/4-inch to 1/2-inch (6mm to 12mm).
  • USE YOUR TOOLS: Fits 3/8-inch impact wrench or ratcheting wrench.
  • Impact wrench can be inserted directly into the stud extractor.
  • BUILT TO LAST: Jaws are perfectly shaped to easily grab a bolt or stud even with no head.
  • Solid metal construction for strength and longevity.
  • EASY TO USE: Simple instruction and diagrams included.
  • Place stud extractor over stud to be removed and tighten jaws by turning....
Check Stock

Blackhead Remover Comedone Extractor Tool - Dual Loop Whitehead Blemish Acne Removal - Skin Facial Pimple German Stainless Steel - by The Unique Edge

  • ✔️ YOUR PERFECT COMEDONE EXTRACTOR TOOL – Our comedone extractor tool is a perfect gift for anyone! This includes professional estheticians and....
  • ✔️ OUR QUALITY – Our comedone extractor tool is made from German stainless steel. German stainless steel uses more precise manufacturing....
  • ✔️ PRECISION COMEDONE EXTRACTOR TOOL – All our comedone extractor tools remove blackheads, whiteheads, blemishes, and acne easily! This classic....
  • ✔️ SAFELY EXTRACT WITHOUT SKIN DAMAGE – All our comedone extractor tools safely extracts blackheads, whiteheads, and pimples without scarring....
  • ✔️ LIFETIME WARRANTY – Love them or we’ll buy them back from you, no questions asked!.
Check Stock

VIVO 2 Frame Stainless Steel Manual Crank Bee Honey Extractor, SS Honeycomb Spinner Drum BEE-V002C

  • Durable - For long lasting use, this two frame honey extractor operates with sturdy metal gears..
  • Frames - This honey extractor fits shallow, medium, and deep frames..
  • Steel Drum - The drum on this two-frame honey extractor is 29" tall and 13.5" in diameter, perfect for extracting a lot of honey at one time..
  • Stainless Steel - With a smooth stainless steel finish, BEE-V002C is designed to help you save time and energy..
  • 1 Year Warranty - This honey extractor comes with a limited 1-year Manufacturer warranty as well as friendly tech support to help with any questions or concerns..
Check Stock

TunaMax Extractor Tool Hand Wand with Clear Head for Upholstery & Carpet Cleaning, Car Detailing Vacuum Wand for Portable Extractors & Truckmounts | Turn Shop Vac into an Extractor (CUS04)

  • *【Diy a Powerful Extractor】 If you are considering buying a professional extractor, it will be a good substitute. You can therefore save the expensive cost of a pro extractor. Our Extractor Hand Wand can be used as a replacement for many Extractor heads.
  • More importantly, it can turn your wet/dry vacuum into an extractor.
  • *【Two Adapters for Your Choices】 Large size adapter A fits 1-7/8" spiral-wound hose.
  • Small size adapter B fits 1-1/4" spiral-wound hose.
  • *【 Transparent Head Design】The 3.5" width clear head design allows you to see the dirt and impurities being cleaned, and directly see the entire cleaning process and effect in real time.
  • *【Stainless Steel Tube】Standard stainless steel 1.5" vacuum tubing is compatible with portable extractor and truck mount and most carpet cleaning system.
  • *【Attention】Please kindly noted the two adapters are with threads inside, could only connect spiral wound hose directly. Please make sure the hose termination could be taken off before order.
Check Stock

CREWORKS Electric Honey Extractor 4 Frame, Honey Extractor Separator Bee Frame Spinner, Honeycomb Bee Frame Spinner, SS Motorized Honey Extractor Beekeeping Equipment Spinner Drum with Stand (4 Frame)

  • Sturdy and reliable structure: The main structure of the honey extractor is made from premium stainless steel and rolled by the seamless welding machine. Premium food-grade polished stainless steel honey drum can resist against rust and wear..
  • High-speed motor: Our tangential extractor has a motor power of 140W and 1.1A. Featuring 1300rpm motor, variable speed option, and high precision bearing, this electric honey extractor has a higher speed and longer service in life..
  • 4-frame Electric honey extractor: This honey extractor can handle 4 standard frames at one time. No matter they are deep, medium or shallow frames, this spinner will do its job perfectly. It is slightly rounded to the inner side in order to protect your honeycombs from breaking. The overall height of the extractor is 44 inches..
  • Honey gate: Honey will flow into the container with a filter through the 2-inch honey gate without efforts. 2 transparent plexiglass covers allow you to observe the extracting process..
  • Easy to install: Simple procedures are needed to set this extractor up. Put the honeycomb in, rotate the crank and honey will be extracted in a short time. It is an ideal choice for small-scale beekeeping or amateur..
Check Stock

AAProTools Schamberg Comedone Blackhead Extractor/Blackhead Remover/Whitehead Extractor/Whitehead Remover/Acne Remover Made From 100% Stainless Steel With

  • AAProTools Schamberg Comedone Blackhead Extractor/Blackhead Remover/Whitehead Extractor/Whitehead Remover/Acne Remover Made From 100% Stainless Steel....
  • Stainless Steel, Gauranteed Satisfaction And Value For Money.
  • All Instruments Are Produced With High Quality Stainless Steel.
  • AAProTools Products Offer A Handmade Touch To Each Instrument..
Check Stock

YSJWAER Carpet Vac Extractor Attachment-Tool - Cleaning Vacuum Clear Upholstery Car Detailing Turn Shop Vac into an Extractor

  • EXTRACTOR ATTACHMENT: This tool turns any wet/dry vacuum cleaner and shop vac into a powerful extractor. Has the ability to remove dirt and dirty water. Easy to install and reusable. Saves you the cost of purchasing a professional carpet extractor..
  • PERFECT DESIGN: The width of the transparent head is 3.5 inches. We can see more visually through the clear head that dirt and impurities are being cleaned. This extractor tool helps to extract stains from vehicle and living room upholstery carpets..
  • ADAPTER: We offer 2 rubber adapters to fit 1.58" and 1.89" size diameter spiral wound hoses. Perfect for all uses in your home and car..
  • STAINLESS STEEL TUBING: Stainless steel vacuum tubing with an outside diameter of 1.5" is compatible with portable extractors and truck mounts as well as most carpet cleaning systems..
  • AFTER SALES SERVICE: Vac extractor attachment are strictly quality controlled. You will have 3 months free return service. If you have any use and quality problems. I will give you a satisfactory reply within 12 hours.Add to Cart with Confidence！.
Check Stock