Reviews Header Pipe

Mofun Billet Power Exhaust Tip Fits for 2000-2017 Suzuki DRZ250, 2000-2023 Suzuki DRZ400, with Screen Arrestor

  • For DRZ400 S   2000-2019 For DRZ400 SM   2000-2019.
  • Sporty and lightweight Slip-On Line Link Pipe is a perfect match for this great DRZ 400 . Installation is a snap. Let your bike stand out with beautiful design, and the unique sound of Slip-Ons..
  • Large diameter 37mm header for maximum performance..
  • After removing the exhaust pipe, connect the link pipe to the motorcycle, connect the exhaust pipe to the middle pipe, and fix it for normal use..
  • Easy to install, No Installation Instruction We will give you a sticker as a gift after you submit your order..
Check Stock

GREHUA Upgrade Header Exhaust Pipe Jet Kit for Non Hemi Predator 212cc 196cc 6.5hp XP7HPE GX160 GX200 Baja Warrior mb200 Ct200u BT200x KT196 Ct200u-ex RB200 Go Kart Engine Mini Bike Performance Parts

  • FITMENT—fit for go kart engine mini bike generator powered by non hemi predator 212cc 196cc 6.5hp performance parts powerhorse GX160 GX200 baja warrior mb200 colema* ct200u BT200x monste* moto engine..
  • HIGH PERFORMANCE—it's the predator 212cc performance parts upgrade header exhaust pipe kit. It's a simple job to upgrade go kart engine mini bike exhaust pipe,and let the exhaust flow more smoothly to promote more power..
  • ROAR OF SOUND—if you like pop and loud sounds that want to make your 212cc engine sound like a little beast.You can add the predator 212cc exhaust pipe to amplify the motorcycle roar and you'll be the star of the riding track..
  • PACKAGE INCLUDED—1 x header exhaust pipe,1 x spark plug,2 x lock washer,2 x nut,1 x wrench,1 X emulsion tube,2 x main jet(.036" & .037").
  • NOTE—this exhaust pipe will change color due to the high heat generated by the engine. So You must know this before you make your purchase! And please check as much as possible to the item picture, model and size carefully before purchasing. Or leave us messages for assistance if you're not sure if the exhaust pipe fits.(Engine is not included in the package).
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

BETTERCLOUD 16PCS 3 76mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

NICECNC Motorcycle Stainless Steel Slip On Exhaust Header Down Pipe & Exhaust Mid Pipe for Kawasaki Ninja 300 EX300 2013 2014 2015

  • Condition:100% Brand New AFTERMARKET PARTS,Qty.: 1 x Set Exhuast Fipe (Header & Mid ).
  • Material: Stainless Steel,Color: Polished,Designed to replaces the stock pipe and increase the power performance.
  • Full stainless steel made exhaust header mid or link pipes.
  • Joint is designed to fit all 51mm slip-on type mufflers.
  • Includes necessary mounting hardwares,Easy to install,no instruction.
Check Stock

2.5 Inch 2 Bolt Exhaust Flange Exhaust Gasket Connection Kit for for Exhaust Stainless Steel 2.5 2 1/2 63mm -1 Pcs Flange & 1 Pcs Gasket

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

Erweater 2 Roll 2″ x 50ft Titanium Exhaust Wrap Header Wrap Roll Kit, for Motorcycle Car Manifold Header Pipe Heat Wrap Tape with 10pcs Stainless Ties

  • Made of high quality thickened fiberglass material with locked edges on both sides for easy breakage. Exhaust pipe wrap can reduce the heat under the hood by up to 50%, improving the performance of cars and motorcycles..
  • It can work for a long time at high temperature from 900 to 1000 degrees Celsius! Stronger and more durable for improved thermal performance and reliability Highly resistant to wear, oil leaks, temperature and vibration damage..
  • Extremely flexible for a tight and secure wrap. Improved horsepower performance for automotive exhaust header wraps, motorcycle exhausts, gas pipes and other custom applications..
  • Soak header heat wrap in water prior to installation so the fiberglass doesn’t fly around. Put on gloves (not included), wrap it around the exhaust pipe, secure it with an overlap (like the grip of a tennis racket), and simply secure the ends with stainless steel ties..
  • Package includes two 2″ x 50 ft rolls of heat wrap, 10 stainless steel zipper ties. If you have any questions or are not satisfied, please feel free to contact us..
Check Stock

Yonaka 4-1 Polished Stainless Steel Header Compatible/Replacement for Honda Acura B-Series

  • STAINLESS STEEL CONSTRUCTION - Made of high quality T-304 stainless steel material, which features with strength, rigidity and durability, preventing....
  • SHORTY HEADER DESIGN - 4-1 shorty header design increases high flow air. The bent shape is helpful to the unrestricted flow along the entire flow....
  • HIGH PERFORMANCE - It provides each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders. More....
  • EASY INSTALLATION - Direct bolt-on installation , no more modification needs but hardware such as gaskets and bolts are necessary. 1 X pair of exhaust....
  • FITMENT - Headers may need to be clearanced if using the stock steering shaft, not compatible with factory AC components Compatible with 91-04 GMC....
Check Stock