Reviews Header Connector - BestBuyersPro.com

Goliton USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm Compatible for ASUS Motherboard

USB 3.1 require a different front panel header than USB 3.0.
The USB 3.1 port interface is using the USB 3.0 pin set and more.
It is design to be backwards compatible (will explain later).
There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX....
Connector1: USB 3.0 Front Panel Header. Connector2: USB 3.1 Front Panel Header..

USB 3.1 Front Panel Header to USB 3.0 Type-A Female Extension Cable 50cm Panel Mount Type Length: 50cm.
USB 3.1 require a different front panel header than USB 3.0..
The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later). .
There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS....
Connector1: Type-A USB3.0 Female Connector2: USB 3.1 Front Panel Header.

The cable only support usb3.1/usb3.0 device, it can't work at USB2.0(480Mbps).
USB 3.1 require a different front panel header than USB 3.0. The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later)..
There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc..
Connector1: USB 3.0 Front Panel Header Connector2: USB 3.1 Front Panel Header.

Connector Type : USB 3.0 internal motherboard 20/19 Pin header female to Two USB 3.0 A Female (PCI bracket Excluded).
This adapter provides a single standard USB 3.0 female connection, connecting USB 3.0 devices to the motherboard like Asus Sabertooth 990FX, plug and....
This USB 3.0 cable can be installed into a standard PC slot and will be connected internally to any USB 3.0 20 pin header socket. It expands your....
2 ports USB 3.0 Type A female to motherboard header adapter cable, superspeed USB3.0 extension code, USB 3.0 female port backwards compatible with USB....
NOTE: The Y shape cable has 19 pins but the connector has 20 holes, one hole is unused. Length : 25cm (include connector).

CPU: Support for AMD AM3/Phenom II/Athlon II processor. Chipset: NVIDIA GeForce 7025/nForce 630a chipset.
Memory: 2 x 1.5V DDR3 DIMM sockets supporting up to 8GB of system memory, Dual channel memory architecture, Support for DDR3 1333(OC)/1066/800 MHz memory modules.
Audio: Realtek ALC889 codec, High Definition Audio, 2/4/5.1/7.1-channel. LAN: Onboard Realtek RTL8211CL (10/100/1000Mbit).
Expansion Slots: 1 x PCI Express x16 slot, running at x16. 2 x PCI Express x1 slots. 1 x PCI slot.
Storage Interface: 4x SATA 3Gb/s connectors. Support for RAID 0, RAID 1, RAID 5, RAID 10 and JBOD.
Internal I/O Connectors:1 x 24-pin ATX power connector/1 x 4-pin ATX 12V power connector/4 x SATA 3Gb/s connectors/1 x CPU fan header/1 x system fan header/1 x front panel header/1 x front panel audio header/3 x USB 2.0/1.1 headers/1 x parallel port connector/1 x clearing CMOS jumper.
Back Panel Connectors:1 x PS/2 keyboard port/1 x PS/2 mouse port/1 x serial port/1 x D-Sub port/4 x USB 2.0/1.1 ports/1 x RJ-45 port/3 x audio jacks (Line In / Line Out / MIC In).

4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
PWM splitter cable connects an additional fan to increase airflow in your computer case.
Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
Add more cooling to your computer with t....

USB 3.1 require a different front panel header than USB 3.0..
The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later)..
There are no official release of the specs for the USB 3.1 header yet (as of this writing),.
But first motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc..
Connector1: Type-C Female with Panel Connector2: USB 3.1 Front Panel Header.

Connector1: USB 2.0 Socket Connector2: USB 3.1 Front Panel Header.
The adapter is a converter to convert the available PCI-E of a motherboard into a USB 3.1 header..
Thus the USB 3.1 port of a housing can also be supplied with USB 3.1 without a suitable mainboard. The compact adapter can be inserted directly and....
Converter plug-in for the mainboard Fits into any USB 3.0 header Bundling in USB 3.1 with up to 10 GBit / s.
The adapter is the perfect solution to use the USB 3.1 connectors with Type-C or Type-A. Thus, two data lines with 5 Gbps each are available, which....

...udio: VIA VT2021 codec. High Definition Audio. 2/4/5.1/7.1-channel. Support for S/PDIF Out. LAN: Atheros GbE LAN chip.
Expansion Slots: 1 x PCI Express x16 slot, running at x16. 1 x PCI Express x16 slot, running at x4. 1 x PCI Express x1 slot. 1 x PCI slot. AMD CrossFireX technology.
Storage Interface: 2 x SATA 6Gb/s connectors. 4 x SATA 3Gb/s connectors. Support for RAID 0, RAID 1, RAID 5, and RAID 10..
USB: Up to 10 USB 2.0/1.1 ports. Up to 4 USB 3.0/2.0 ports..
Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/2 x SATA 6Gb/s connectors/4 x SATA 3Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/1 x USB 3.0/2.0 header/3 x USB 2.0/1.1 headers/1 x serial port header/1 x parallel port/1 x Trusted Platform Module (TPM) header/1 x Clear CMOS jumper.
Back Panel Connectors: 1 x PS/2 keyboard/mouse port/1 x D-Sub port/1 x DVI-D port/1 x HDMI port/2 x USB 3.0/2.0 ports/4 x USB 2.0/1.1 ports/1 x RJ-45 port/3 x audio jacks.

This listing is for 1pc multiplier, One connect to motherboard 9pin(10pin) port, Split to 2x 9-Pin(10-pin).
Connector(s) B: 2X 9Pin USB Header Female.