Reviews Galvanized Roofing Sheets

#8 x 1/2\ Stainless Philips Pan Head Sheetmetal Screw (1/2\ to 2\ Lengths in Listing) 100 Sheet Metal Screws (#8 x 1/2 Inch)

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1".
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.
Rough Estimation - regular roofing project should require 80 screws per 10 x 10 section of roofing.

TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.

#10 Sheet Metal ROOFING SCREWS. Our metal roofing screws are galvanized for corrosion resistance..
1000 COUNT Metal-to-wood roofing screws have a type 17 self-starting tip for easy installation.
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Hex washer head roof screw with EPDM washer seal, seals roofing panel to screws to prevent leaks..
The screw is Not Painted and is naturally a gray color due to the galvanizing process on the screw.

#12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

#12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.

Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..

Copper Roofing Nails are used in various roof installations, notably in slate roofs for their ease of removal if the slate needs to be replaced as well as their corrosion resistance and malleability..
They are also used for straps, gutters, and leaders as part of rain gutter systems, fascia installations, furniture restoration, and planked wooden boat construction. While designed for roofing, copper nails have other uses as well such as flashing and decorative finishing applications..
Copper roofing nails feature wide, flat heads for an increased bearing surface with diamond points and smooth shanks for ease of penetration. They are made entirely of solid copper and their corrosion resistance and malleability make them a good alternative to galvanized nails..

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head.
Metal Screws are painted to closely match many brands of metal roofing though color may vary.
Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
#10 Sheet Metal roofing screws are galvanized for corrosion resistance.