Reviews Fuse Protection

Nilight - 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder 2 Years Warranty 1 Count Pack of 10

  • Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
  • 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
  • Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
  • Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
  • Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.
Check Stock

6 Way Blade Fuse Box for Automotive [ATC/ATO Blade Fuses] [100 Amp][LED Indicator] [Protection Cover] [10-30V DC; 12V] Auto Marine Fuse Block

  • LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected..
  • FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses..
  • 100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel..
  • HEAVY DUTY CONSTRUCTION - This fuse panel has a #10-32 stud for power feed, .250” male quick disconnect terminals, and can take an input voltage of 10 – 32 V DC..
  • User Manual available for download under Product Information Details.
  • Search for "Online LED Store Fuse Box" on YouTube for How To Video..
Check Stock

Transformateurs

  • 4000 Watt Step Up/ Down Voltage Transformer- This step up transformer and step down transformer can be used for all electronics, household appliances....
  • Voltage Transformer - This power transformer can be used in 110 Volt countries and 220 Volt countries. It will convert from 110 Volts to 220 Volts &....
  • Fuse Protected Power Transformer - CE Certified. Full Range Fuse Protection, Full Range Over Current Protection. Fuse will cut off the current if the....
  • Built-in large-caliber heat dissipation, stable output, good heat dissipation performance, safety protection, and more stable operation. note: Make....
  • Best Service: Dual circuit breakers protective for each voltage that is safe operation. If you have any problem, please feel free to contact us, we....
Check Stock

BUNKER INDUST 10-Way Fuse Box Blade Fuse Block Holder with LED Indicator for Blown Fuse Waterpoof Protection Cover for Car Boat Marine Automotive,Include 20Pcs Blade Fuses and 1Pcs DIY Sticker

  • LED INDICATOR FOR BLOWN FUSE---Each circuit has red LED warning indication.If a fuse blows,the red LED next to the problem fuse will illuminate,allowing you easily identify and replace blown fuses immediately without guessing!.
  • 1 POWER CONNECTION/10 CIRCUIT OUT---Maximum of 30 Amp per circuit & 100 Amp per panel.4-Way Blade Fuse Box can interchangeable or compatible with all automobiles and devices equipped with a 10-33 Volt DC power source..
  • FUSE PROTECTION COVER---A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.Easy to operate, splash and dust-proof design..
  • HEAVY DUTY CONSTRUCTION---This fuse panel has a #10-33 stud for power feed, 250” male quick disconnect terminals, and can take an input voltage of 10 – 33 V DC..
  • PACKAGE INCLUDE---1Pcs 10-Way Fuse Box Holder,1Pcs DIY Sticker,20Pcs Blade Fuses: 5A x 2, 10A x 4, 15A x 4, 20A x 6,30Ax 2,40Ax 2. Note: This box holder is suitable for standard blade fuses(ATO/ATC).Please check the size or shape of fuse before purchasing..
Check Stock

BOJACK Christmas Light Fuses Fast-Blow Glass Fuses Assortment Kit 3.6x10mm Mini Fuse 125V 2.5 3 5A amp Fuses packag in a Clear Plastic Box

  • Ceramic Cartridge Fuse Dimension (L x Dia.): 0.23 x 1.18 inch (6 x 30 mm)..
  • Package included: 15 pieces 30A 250V Slow-Blow Time Delay Ceramic Fuse..
  • Ceramic Cartridge Fuse Material: High Quality Ceramic Fuse, durable glass..
  • Overcurrent protection, of either the load or source circuit. Fuse With overload and overcurrent protection. Widely used for electric equipment, home appliance, and so on..
Check Stock

ABN Fuse Tap Fuse Holder & Fuse 5-Pack 12V Add a Circuit Kit Standard ATO Fuse (NOT Mini) Blade & 15A AMP Adapter

  • INSTALL DEVICES WITHOUT SPLICING: Add devices and accessories to your car or any vehicle with compatible sized fuses without cutting into wires.
  • Designed to allow you to turn 1 fuse slot into 2 while providing protection for both circuits.
  • Tap the fuse box to power additional electronic devices with no need to cut or splice.
  • Use this to add a circuit without cutting into your wire harness.
  • Easier to access and to know which circuit you are on than tapping into difficult existing lines.
  • VARIOUS APPLICATIONS: Gives you the positive side of your battery so you can hardwire a 12V radio, LED light strip, radar detector, dash cam, GPS, backup camera, USB charger, or any other small electronic device that requires direct wiring into the fuse box (fuse to factory fuse panel) without needing to cut or splice.
  • If replacing a radio, use the existing radio wiring.
  • FITS YOUR VEHICLE: Allows user to turn 1 fuse slot into 2 while providing protection for both circuits.
  • Designed for use with standard 15A ATO fuses (not mini).
  • Includes a connector on the end of the wire for your convenience.
  • EASY TO USE: Pop in this automotive fuse tap replacing the existing fuse to have a great tap for your accessories.
Check Stock

VANTRONIK Fuse Puller  for Car Boat Blade Fuse Mini Fuse and Standard Fuse 3 Pack

  • Package includes: you will receive 3 pieces of fuse pulling tools..
  • Safety protection: When the fuse gose wrong, you can handle it directly with your fingers, but sometimes it may still not work.
  • Using the car fuse fetch clips is more effective to solve the problems, while please be careful not to clamp the fuse too tight.
  • Quality material: the automobile fuse pullers are made of reliable plastic material, not easy to break or chip, durable and fully insulated..
  • Anti-skid grip: the yellow fuse removal tools adopt a textured design, which looks stylish and are convenient for you to control the fuse firmly and tightly without slipping, and then easy to remove or replace cartridge fuse.
  • Mini size: the dimension of the mini plastic fuse pullers measures approx. 3 x 1 cm/ 1.18 x 0.39 inches.
Check Stock

X AUTOHAUX 4 6 8 Gauge AWG Inline Fuse Holder with 50A AGU Fuses for Car Audio System

  • AWG inline fuse holder with 50A AGU fuse..
  • An in-line automotive fuse holder with heat insulation, pressure resistance and high temperature resistance, wire terminals can accept 4/6/8 gauge wires..
  • Ideal for custom protection circuits or to replace an existing defective one..
  • The fuse holder is used to protect cars and passengers from large-scale short circuits that may be caused by traffic accidents or wiring problems..
  • Package Included: 1 x AWG Inline Fuse Holder with 50A AGU Fuse, 1 x 50A AGU Fuse..
Check Stock

HUBBELL WIRING DEVICES HBL2721 Power Entry Plug 3P4W 30A 3PH 250V L15-30P

  • ♪ COMPATIBLE FUSE :Fits for 1A 2A 3A 4A 5A 7.5A 10A 15A 25A 30A ATC/ATO blade fuse.
  • ♪ SAFETY PROTECTION: Heavy duty 16 AWG red color wire, great look and added protection to the original circuit.
  • ♪ WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof great damp-proof and waterproof performance, safe and reliable.
  • ♪ HIGH QUALITY:Made from high quality materials high fatigue resistance, melting resistance and excellent electrical conductivity and easy to....
  • ♪ PACKAGE INCLUDE: 2 x 16 AWG ATC/ATO Inline Fuse Holder.
Check Stock

Fuse Holder, Ardor 4 Gauge or 8 Gauge in-Line AGU Fuse Holder with 1PC 80A AGU Fuse for Car Audio Alarm Amplifier Truck Audio(AR1122N)

  • 【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very practical fuse holder..
  • 【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
  • 【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
  • 【Multipurpose Fuse Holder】AGU fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
  • 【You Will Get】You will get 1 fuse holder with 1 80A AGU fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..
Check Stock