Reviews Temperature Fuse Fuse Holder

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

...it including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline holder 14awg looped wire about in the middle , one of the ends conne....

5x20mm Fuse Holder: 6pcs fuse holder inline screw type with 18 AWG wire, suitable for 5x20mm glass fuse..
6x30mm Fuse Holder: 4pcs fuse holder inline screw type with 18 AWG wire, suitable for 6x30mm glass fuse..
Fuse Dimension:5x20mm/0.2x0.78in,6x30mm/0.23x1.18in,Fuse Voltage: 250V.
Fuse Model:5x20mm/10 kinds:0.2A 0.5A 1A 2A 3A 5A 8A 10A 12A 15A ,6x30mm/5 kinds:0.5A 1A 5A 10A 15A..
Package Quantity: 5x20mm Fuse Holder x 6pcs,6x30mm Fuse Holder x 4pcs,100pcs glass fuse(6x30mm Each model 10pcs,5x20mm Each model 10pcs),All glass fuses are packed in reusable boxes for easy management..

2 kinds of fuse holder with quick blow glass tube fuse, suits for Car Radio Audio DIY project..
In-line screw type fuse holder, with 22 AWG wire, suitable for 5x20mm glass fuse..
Panel mounted fuse holder, with screw cap and soldering terminals, rated voltage : AC 15A 125V, AC 10A 250V..
10 different value glass fuse assortment, including 20pcs fuse 0.2A, 0.5, 1A, 2A, 3A, 5A, 6A, 8A, 10A, 15A, 10 pcs each value..
Package Content: 5 * fuse holder in-line screw type + 5 * panel mounted fuse holder + 100 * quick blow glass tube fuses..

PACKAGE INCLUDE - MuHize 3x Low profile mini fuse adapter with 5 Amp low profile mini blade fuses.
MuHize 3x Mini fuse adapter with 15 Amp mini blade fuses.
MuHize 3x Standard fuse adapter with 5 Amp standard blade fuses..
DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for blade fuses (rating 2Amp-40Amp). 3 Types: Low profile mini fuse adapter fits for Korean Cars.
Mini fuse adapter fits for Japan and US Cars.
Standard fuse adapter fits for European Cars. Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..

Heavy duty 10 (AWG) Gauge red color wire Allow you to splice it into any project..
Inline fuse holder for ATC/ATO blade fuse..
Package included 4 x fuse holder and 4 x 40Amp fuse..
Water resistant, This fuse holder comes with cap to seal out moisture..
Fuse holder dimension (42x35x13mm),Support up to 40A Standard fuses for 12V..

Includes 1pc WindyNation ANL Fuse Holder + 2pcs ANL 200A Fuses.
See Images for technical specifications and dimensional drawings.
ANL fuse holder will accept up to a maximum of 2/0 gauge cable.
For most applications, the fuse should be sized at approximately 1.30 times the rated power of the device being protected by the fuse.
ANL Fuse Holder mounting bolts are 8 mm in diameter. Use cable terminals with a 5/16" diameter or 8 mm diameter mounting hole to achieve a proper connection to the the ANL Fuse Holder mounting bolt.

Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the fuse box..
Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity, durable and practical for your DIY application.
Multipurpose: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires direct wiring into the fuse box without cutting or splicing.
Wide Compatibility: 3pcs low profile mini fuses adapter with 5 Amp low profile mini blade fuse fits for Korean Cars.
4pcs mini fuse adapter with 15 Amp mini blade fuse fits for Japan and US Cars.
3pcs standard fuse adapter with 5 Amp standard blade fuse fits for European Cars.

Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse.

Dual-slot fuse holder: provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit.
Easy to use: plugs into Occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
Versatility: Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
Superior quality: made from high-quality materials, good bending performance, melting resistance and excellent electrical conductivity.
Package include: 10 x Add-A-Circuit fuse holder, 10 x 15A fuse.