Reviews Full Radius Grooving Tools

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, PVD Coating Metal Cutting, 10pcs

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 3.3mm, Thickness(S): 4.8mm.
  • General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

Stalwart - RBS024 Router Bit Set- 24 Piece Kit with ¼” Shank and Wood Storage Case By (Woodworking Tools for Home Improvement and DIY) Wood

  • ...t and are constructed using high quality materials. Along with the sturdy wooden case, this durable router bit set will allow you to complete all your projects with confidence..
  • MULTIFUNCTIONAL SET -  With 24 included pieces, this kit is great for multipurpose uses. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels. This set also includes an allen wrench for removing bearings..
  • EASY TO STORE- The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • SET INCLUDES- 1/2 mortising bit, 1/2 combination bevel bit, 3/8 dovetail bit, 1/2 dovetail bit, 1/2 90 degree V-groove bit, 3/8 round nose bit, 1/2 round nose bit, 3/8 trimming bit, 1/4 panel pilot bit, 1/4 straight bit, 3/8 straight bit, 1/2 straight bit, 3/4 straight bit, 1/2 flush trim bit, 1/8 radius round over bit, 3/16 radius round over bit, 1/4 radius round over bit, 3/8 radius round over bit, 1/4 cove bit, 3/8 cove bit, 1/2 45 degree chamfer bit, 1/4 Roman Ogee bit, 1/4 slot cutter bit, 1/2 rabeting bit, wood case.
Check Stock

FomaSP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426 Lathe Grooving Cutting Tools 10pcs

  • Grey colors PVD coating, good for working steel, stainless steel, cast iron..
  • Size, Width(B): 4.1mm, Radius(R): 0.25mm, Longth(L): 11.3mm, fit for Korloy grooving holder..
  • General chipbreaker for grooving working, with better chip breaker, good material and more efficiency.
  • Long processing life, competitive price, high cost performance.
  • Has more than 15 years of experience in producing carbide inserts.
Check Stock

Pack of 5 Wood Turning carbide Cutter inserts Combination Set,For YUFUTOL Or Other Popular Wood Turning Tools(Include Square, Square With Radius,Diamond,Round Shape Cutters) Supplied with Screw

  • This Combination Carbide Inserts Set Will Give The Best Selection For Your Wood Turning Job,It Fits YUFUTOL Brand Wood Turning Tools Or Other Similiar Brand Tools..
  • Size And Shape Included: Square(14mm 15mm),Square With Radius (15mm-2″ Radius),Round(16mm), Diamond Shape With Radius Point..
  • 90* Square and 2″ Radius Fix Full Size Rougher, Round Cutter Fix Full Size Finisher or Hollower, Diamond Cutter Fix Detailer.
  • All The Carbide Insert Cutters Supplied With Screws, All You Need Is Find The Matched Wood Turning Tools Before Start Your Turning Job.
  • Advantages：Significantly Improved Efficiency And Turning Results, Save Time and Cost.
Check Stock

HXLPAY Radius Jig Router Templates Corner Routing Templates, ABS+CNC high Hardness Processing Glue, Rounded Corners Bit R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Packs)

  • [High-quality material]: ABS+CNC High Hardness Processing Glue processing..
  • [Size]: The set includes R5, R10, R15, R20, R25, R30, R35, and R40 type corner radius quick clamps, 8 radius angle options..
  • [Professional woodworking tools]: It is designed with three holes to prevent cutting. This set of tools allows you to trim the edges and corners of the board. We call it Radius Quick-Jig (Corner Jig). Use these to cut the outer radius! Practical and professional woodworking tools can make the work smooth and efficient..
  • [Easy to use]: To use, just select the corner of the template to be copied and place it on the desired corner of the wood. A complete set of professional tools, easy to use, allows you to save time, and is still trying to freely handle corners in your woodworking projects..
  • [Product usage name 1]: corner jig corner radius routing templates corner jig router corner radius jig corner routing templates hxlpay radius jig router templates juice groove jig radius corner jig router radius guide woodworking radius jig router templates radius router templates radius routing template radius template radius template router round corner router templates..
  • [Product usage name 2]: router bit radius router corner jig set router corner jig router corner radi....
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC2135 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 330 sfm(290-415), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 410 sfm(365-500), fnz 0.016 in(0.009-0.022).
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123J2-0635-RM, 0.1252\ Corner Radius, J Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving iinsert.
  • INSERT SEAT SIZE J = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.009 in/r(0.006-0.011), vc 470 sfm(440-530), fnz 0.019 in(0.009-0.027).
  • Steel - fnx 0.009 in/r(0.006-0.011), vc 600 sfm(550-680), fnz 0.019 in(0.009-0.027).
Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC3115 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

  • INSERT TYPE: 2 edge round, full profile grooving insert.
  • INSERT SEAT SIZE F = matching insert & tool holder.
  • EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
  • RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
  • START CUTTING VALUES: Cast Iron - fnx 0.006 in/r(0.003-0.008), vc 540 sfm(480-650), fnz 0.016 in(0.009-0.022).
  • Steel - fnx 0.006 in/r(0.003-0.008), vc 690 sfm(610-840), fnz 0.016 in(0.009-0.022).
Check Stock

CDBP Carbide Grooving Inserts MRMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Yellow Coating, 10pcs

  • Size, MRMN400-M, Width(B): 4mm, Radius(R): 2mm, Longth(L): 21mm, High(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock

CDBP Carbide Grooving Inserts MGMN400-M for MGEHR/L and MGIVR/L Grooving Cut-Off Tool Holder, Installed with KOLORY, CVD Coating Metal Cutting, 10pcs.

  • Size, MGMN400-M, Width(B): 4mm, Radius(R): 0.4mm, Longth(L): 21mm, Dimension(D): 1.2mm, Thickness(S): 4.8mm..
  • CVD coated yellow color grade, universal grade, suitable for steel and cast iron continuous cutting and interrupted cutting finishing to roughing. Grade with a wide range of applications. Stainless steel continuous cutting and interrupted cutting..
  • Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
  • Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. A high the thermal shock resistance, suitable for light interrupted cuts..
  • CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..
Check Stock