Reviews Forged Square Bar

Neiko 00200A 1/2" Drive Extension Breaker Bar | 15" Length | Rotating Flex Head | CR-V Steel

  • [LONG REACH]: Half inch drive breaker bar with a long 15-inch handle that provides ample leverage to amplify torque..
  • [DURABLE]: Made of extremely durable drop forged heat-treated chrome vanadium and corrosion-resistant mirror/chrome polish finish..
  • [VERSATILE]: 180-degree flexible head works at any angle, to reach around tight spaces and generate optimized leverage..
  • [DESIGN]: Spring-load ball bearing holds sockets securely and is ideal to break and loosen rusted, stubborn or stuck nuts and bolts..
  • [PROTECTION]: Square drive radius corners reduce socket wear by locking on to the sides of the fastener rather than the edges..
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Proforged 113-10263 Rear Sway Bar End Link

  • ... sway bar end links with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • PRECISION FIT AND FINISH. Proforged sway bar end links are built using some of the toughest steel on the planet. Bolt-and-sleeve type links are built with high quality hardware, and tie rod style links feature forged SAE4140 chromoly steel studs and forged SAE1045 housings. Every fit surface is CNC machined for precision fit and finish. Tie rod style units are sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it co....
Check Stock

ColouredPeas Square Cone Mountain Crankset - 6/7/8 Speed 42T 34T 24T Universal Crank Set for Mountain Bikes, 170mm Crank Arm

  • Suitable for 5/6/7/8 speed mountain bike, riveted disc, square hole material 6061 aluminum alloy forged T6 treatment..
  • Crank: Forged, ED (Material: Iron Disc Aluminum Crank), Support: Plastic Guard..
  • Burly and lightweight forged crankset for ultimate strength and reliability..
  • Crank length: 170mm.Forged Alloy crankarms w/solid carbon. steel chainring.
  • Please measure the size to confirm it fit your bike before you order..
  • If you have after-sales problems about our products, please contact us, we will try our best to help..
Check Stock

Proforged 113-10342 Front Left Sway Bar End Link

  • ... sway bar end links with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • PRECISION FIT AND FINISH. Proforged sway bar end links are built using some of the toughest steel on the planet. Bolt-and-sleeve type links are built with high quality hardware, and tie rod style links feature forged SAE4140 chromoly steel studs and forged SAE1045 housings. Every fit surface is CNC machined for precision fit and finish. Tie rod style units are sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it co....
Check Stock

Starrett C33HC-12-4R Combination Square 12 4R Grads

  • With reversible lock bolt, scriber, spirit level.
  • Graduation: No. 4R - 1/8", 1/16", quick reading, 1/32", 1/64".
  • The square heads are forged hardened steel with smooth black enamel finish.
  • Square blade easy-to-read, sharp graduation.
  • Square head and center head bearing surface are accurately ground.
Check Stock

Tromlycs 12x12 Chair Cushion Bar Stool Square Seat Cushion with 4 Velcro Straps Slip Resistant Textured Wooden Metal Small Bar Stool Cover - Gray (1 Pack)

  • 【High Density Premium Foam】1.5 inch thick foam makes this square seat cushion unparalleled comfy meanwhile keep in shape and won't go flat. The square stool cushion shall helps you reduce the pressure on hips, tailbone, lower back even on the hard metal outdoor bar stools..
  • 【Extra Skid-proof Design】Non-slip backing with 4 attached velcro straps keep the bar stool seat cushion in place tightly. No need to be worried about the square chair cushion slide while sitting. And the straps also make the small cushion stay put during your daily life..
  • 【Perfect Size for General Purpose】12 x 12 inches chair cushion square suit for most indoor outdoor bar stools. You can use this square seat cushion not only in your Family Bar, Dining Room, Kitchen, Bistro, but also your Porch, Patio, Garden for a Outdoor Beer Party!.
  • 【Machine Washable】The whole bar stool seat cushion is machine washable. Instructions: Put the stool cushion into a laundry bag before wash it under 86°F water (Gentle Mode/Mild Detergent/No Bleach/No Iron). Then after a tumble dry low heat the square seat cushion will be same as new..
  • 【30 Days Refund Guarantee】Your satisfaction is what we work for. 30-day money back guarantee if you are not 100% satisfied with our square bar stools ....
Check Stock

Swanson Tool Co S0107

  • Heavy gauge aluminum alloy with matte finish to prevent glare.
  • 1/4 in. and 1/2 in. spaced notches to facilitate scribing lines.
  • Great for deck framing and stairway building!Description7 tools in one: framing square, try square, miter square, protractor, saw guide, with layout bar stair guide to determine out-of-square corners. 1/4quot.
  • spaced notches to facilitate scribing lines. Black filled markings with layout bar and blue book.
Check Stock

Tromlycs Stool Cushion Square for Bar Stools with Ties 14x14 Chair Seat Cushion Textured Barstool Pad 1 Piece 14 inches Gray

  • 【High Density Premium Foam】1.5 inch thick foam makes this square seat cushion unparalleled comfy meanwhile keep in shape and won't go flat. The square stool cushion shall helps you reduce the pressure on hips, tailbone, lower back even on the hard metal outdoor bar stools..
  • 【Extra Skid-proof Design】Non-slip backing with 4 attached velcro straps keep the bar stool seat cushion in place tightly. No need to be worried about the square chair cushion slide while sitting. And the straps also make the small cushion stay put during your daily life..
  • 【Perfect Size for General Purpose】14 x 14 inches chair cushion square suit for most indoor outdoor bar stools. You can use this square seat cushion not only in your Family Bar, Dining Room, Kitchen, Bistro, but also your Porch, Patio, Garden for a Outdoor Beer Party!.
  • 【Machine Washable Cover】There is a zipper by the bar stool cushion’s side so that you can take the cushion cover off easily and to get machine or hand washing .Then after a tumble dry low heat the stool covers rectangle padded will be same as new..
  • 【30 Days Refund Guarantee】Your satisfaction is what we work for. 30-day money back guarantee if you are not 100% satisfied with our square bar stools cushions..
Check Stock

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

  • Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
  • Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
  • Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
  • Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
  • Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.
Check Stock