Reviews Hot Forged Steel Bar

Proforged 113-10342 Front Left Sway Bar End Link

  • ... sway bar end links with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none..
  • PRECISION FIT AND FINISH. Proforged sway bar end links are built using some of the toughest steel on the planet. Bolt-and-sleeve type links are built with high quality hardware, and tie rod style links feature forged SAE4140 chromoly steel studs and forged SAE1045 housings. Every fit surface is CNC machined for precision fit and finish. Tie rod style units are sealed with specially-designed CR-rubber boots for ultimate durability..
  • BUILT FOR PROFESSIONALS. There’s a reason why the most well-respected performance suspension brands use Proforged products - we’re fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance chassis parts: Proforged..
  • WHAT IS A SWAY BAR END LINK? A sway bar end link (also known as a stabilizer bar link) is part of your vehicle’s suspension system - it co....
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Emeril Lagasse 9-Piece Forged Cutlery Knife Block Set - Emeril Lagasse Cutlery Set - Perfect Kitchen Knives for Produce, Meat, and Bread

  • Forged vs Stamped – A forged knife is made out of a single bar of steel that is hammered into shape by an expert craftsman. On the other hand a stamped knife is cut out from a sheet of steel and heated by a machine. While stamped knives are the cheaper option, they cannot compare to the quality and efficiency of forged knives..
  • Chef’s Professional Quality Kitchen Knives – This Emeril Lagasse knife set is made with superior stainless steel for a super sharp cutting edge. Cut effortlessly through tough fruit, thick meats, and dense vegetables. Having a well-equipped kitchen will make cooking more enjoyable and efficient..
  • Durable & Safe 9-Piece Set – Comes with 8″ Chef Knife, 8″ Serrated Bread Knife, 7″ Santoku Knife with Cullens, 7.75″ Slicer Knife, 5.5″ Prep Knife, 5″ Utility Knife, 3.5″ Paring Knife, Kitchen Scissors, & Round Rubberwood Block..
  • Quality is King – Forged knives are made with time and care and it shows in their outstanding quality. Forged knives are more comfortable, more efficient, and overall higher quality than stamped knives. Additionally, forged knives have higher blade retention than stamped knives so you can keep your knives sharp longer..
  • Easy Hand Wash – As with most high-end, sharp silverware, do no....
Check Stock

HENCKELS Meat Cleaver, 6\

  • Fabricated from high quality German stainless steel.
  • Fully forged construction offers durability and a seamless transition from blade to handle.
  • Professional, satin finished blade boasts precision cutting and is finely honed for long lasting sharpness.
  • Ergonomic, traditional triple rivet handle gives balance and comfort.
  • Heavy 6 inch cleaver for chopping through joints and bones.
  • Made of stain resistant carbon steel that's hot drop forged for durability.
  • Triple riveted handle surrounds a full tang.
  • Hole in top corner so for hanging on a hook or peg.
Check Stock

Bessey Bar Clamp Set, F-Style Sliding Arm

  • Price For: Each Item: Bar Clamp Set Swivel Type: Replaceable Application: Heavy Duty, Maintenance, Welding, Assembly, Construction and General Purpose Clamping Handle Material: Forged Steel Type: F-Style Sliding Arm Bar Material: Cold Drawn, Heat Treated, Tempered Alloy Steel Includes: (2) Mfr. No. GS12-8K, (2) Mfr. No. GS20K, (2) Mfr. No. GS30K Pad Type: Standard.
  • Country of Origin (subject to change): Germany.
Check Stock

Messermeister Royale Elité Stealth Chef's Knife / 9\

  • The chef’s knife is the workhorse in every kitchen. You will gravitate to this knife and will find yourself using it for 90% of all your cutting tasks. The Messermeister Royale Elité 9” Stealth Chef’s Knife has an American walnut burl handle attached to a hand forged Stealth blade and is about 25% thinner and 10% lighter than our traditional chef’s knife. It has been ground down to a razor sharp edge. You can chop, dice and mince your way through extended cutting tasks without fatigue..
  • Royale Elité combines a beautiful American Walnut Burl wood handle to a fine German stainless steel alloy blade. Walnut burl features a rich deep brown flared pattern and is prized for its hard, strong characteristic as a handle material. The blade is one piece of hot dropped hammer forged German high carbon stainless steel that has been hand crafted into a fine cutting instrument. This vintage style knife is one of a kind and sure to become a treasured family heirloom..
  • Handcrafted in the historic cutlery capital of Solingen, Germany..
  • The German 1.4116 high-carbon, stainless alloy blade resists stains and corrosion, exhibits toughness and durability, holds its edge retention, and is easy to re-sharpen to a razor-like edge..
Check Stock

Messermeister Royale Elité Stealth Chef's Knife / 10\

  • he chef’s knife is the workhorse in every kitchen. You will gravitate to this knife and will find yourself using it for 90% of all your cutting tasks. The Messermeister Royale Elité 10” Stealth Chef’s Knife has an American walnut burl handle attached to a hand forged Stealth blade and is about 25% thinner and 10% lighter than our traditional chef’s knife. It has been ground down to a razor sharp edge. You can chop, dice and mince your way through extended cutting tasks without fatigue..
  • Royale Elité combines a beautiful American Walnut Burl wood handle to a fine German stainless steel alloy blade. Walnut burl features a rich deep brown flared pattern and is prized for its hard, strong characteristic as a handle material. The blade is one piece of hot dropped hammer forged German high carbon stainless steel that has been hand crafted into a fine cutting instrument. This vintage style knife is one of a kind and sure to become a treasured family heirloom..
  • Handcrafted in the historic cutlery capital of Solingen, Germany..
  • The German 1.4116 high-carbon, stainless alloy blade resists stains and corrosion, exhibits toughness and durability, holds its edge retention, and is easy to re-sharpen to a razor-like edge..
Check Stock

HENCKELS Classic Carving Knife, 8-inch, Black/Stainless Steel

  • Fabricated from high-quality German stainless steel.
  • Fully forged construction offers durability and a seamless transition from blade to handle.
  • Professional, satin-finished blade boasts precision cutting and is finely honed for long-lasting sharpness.
  • Ergonomic, traditional triple-rivet handle gives balance and comfort.
  • 8-inch slicing knife slices roasts, poultry, and ham.
  • Made of stain-resistant carbon steel that's hot drop forged for durability.
  • Triple riveted handle surrounds a full tang.
  • Full bolster provides weight and ensures safety.
Check Stock

Midwest Tools and Cutlery MWT-6510C Midwest Snips Forged Blade Offset Aviation Snips Set (Pack of 2)

  • Cuts "Pinch-Thru-Point" Precision cuts completely to blade tip end which reduces cutting strokes and enables complete and accurate trim cuts.
  • Two piece offset aviation set include both left and right cut models. A favorite of professional sheet metal tradesman and contractors.
  • Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated. Hot drop-forged process produces maximum strength.
  • Cut Length: 1-1/4" Cutting Capacity (CR/SS): 18/22.
  • New KUSH-N-POWER grip features a dynamic contour finger stop, soft touch and non-slip ribs.
Check Stock

Metal Magery Stainless Steel Hawthorne Strainer 4-Prong Cocktail Bar Strainer Pack of 3

  • ...sary tool for crafting your signature cocktails and mixed drinks. This bar staple will have your guests coming back for another round each and every time. As functional as it is stylish, this strainer is sure to be an essential, go-to tool for bartenders at trendy bars and restaurants..
  • High Quality Stainless Steel: Forged from Durable Stainless Steel, these bar strainers are built to withstand years of use. Naturally resistant to rust and corrosion so cleaning this bartending strainer is very easy as well..
  • Hawthorne Strainer: Perfect for recipes with fresh ingredients, this strainer's tightly wound coils and perforated holes keep ice and other large ingredients out of your guests' drinks, promising a smooth, refreshing cocktail every time. Whether you're creating a crisp martini or a warm, classic old-fashioned, this bar staple is the perfect tool for the perfect drink!.
  • Cocktail Strainer: Adding to the benefits of this bar utensil, the four-prong design makes this strainer easy to balance on the rim of your glass or cocktail shaker, lessening the chance for slips or spills and ensuring a clean, professional product every time! When not in use, a convenient hole in the handle can be used to store it up off the bar and out of the way, while still ensur....
Check Stock