Reviews Forged Bearing Steel Bars
CARTMAN Wiper Arm Battery Terminal Bearing Remover Puller Tool
- Repair tool can remove the stuck battery terminal, also remove bolted-on windshield wiper arms that fit over a tapered spline.
- Great multi-function small repair tool designed for professional use.
- Battery terminal puller overall forged by carbon steel is durable and exquisite appearance. It can easily remove stuck battery terminal,also remove bolt on windshield wiper arms that fit over a tapered spline.
- Sturdy, Durable & Long Time Service -- This Battery Bearing Extractor Puller is made of strong metal with special heat treatment process, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
- Easy to Operate & Quality Assurance: Jaw opening 6-28 mm for wiper arms with an o/d up to 42 mm.
- With our battery bearing puller you can get a great helper to handle with difficult tasks.
Check StockBikeMaster Safety Wire Pliers with Wire
- Forged steel pliers, shot peened and ground clamping surfaces, quick twist helix.
- Forged steel pliers, shot peened and ground clamping surfaces.
- Spring loaded return, ball bearing puller for easier operation.
Check StockDASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit
- 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
- 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
- Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
- Repeat action until the bearing or bushing has been removed.
- U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
- 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
- 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check StockATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS
- Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
- Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
- Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
- Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
- Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....
Check StockATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV
- 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
- Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
- Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
- Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
- Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check StockATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set
- Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
- A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
- Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
- slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
- this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
- Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check StockElgin CL-1785PK Performance Cam/Lifter Kit
- for Dodge for Chrysler LA V8 318 - 360 340.
- Lifter Style Hydraulic roller Link Bar: Vertical..
- Package Contents: 8 Pairs of Hydraulic Roller Lifters with Lifter Link Bars..
- Feature: Forged, Heat Treated Chrome Alloy Steel Body for High Strength.
- Precision Machined and Heat Treated Internal Components..
Check StockMOOG 280 U-joint
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower.
- CORROSION PROTECTION -- Exclusive MICRO SHIELD coating protects against rust and corrosion.
- STRONG AND DURABLE -- Cold-forged, case-hardened and precision-ground alloy steel crosses for durability.
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants.
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces.
Check StockAnbull 3/4 Inch Drive Deep Impact Socket Set, 12 Piece Metric Combination, Sizes 17mm 19mm 21mm 22mm 24mm 27mm 30mm 32mm 33mm 36mm 38mm 41mm Hex Socket Set, 6 Point Design, Cr-V Chrome Vanadium Steel
- DURABLE and HIGH STRENGTH: Corrosion-resistant black phosphate finish for durability. Made of high quality CR-V, drop forged, heat treated CR-V steel..
- SPECIAL DESIGN: Each socket has a drilled head to locate retaining ball bearing on most breaker bars & impact wrenches to ensure a safe secure. prevents slippage and distortion of axle nuts, true IMPACT for exceptional strength & durability..
- HEAVY DUTY STORAGE CASE: Come with a heavy duty blow molded storage case, easy to carry and transport..
- WIDELY USED: Use On All Air Powered & Battery Powered Impact Tools/Wrenches, Also Breaker Bars/Strong Arms & Torque Wrenches. Removal, Repair to remove, install, and repair hub or axle nuts on your vehicle.
- Fits axle nuts on most American domestic and import vehicles..
- PACKAGE INCLUDED : 12 pcs 3/4-Inch deep impact socket(17mm,19mm,21mm,22mm,24mm,27mm,30mm,32mm,33mm,36mm,38mm,41mm ) and 1pc heavy duty storage case..
Check StockTRKLRD -Throne Cycles Track Lord Completes Alloy 6061 with Carbon Alloy Fork (Neo Chrome, 55cm)
- Fork: 1 1/8 to 1 1/2 tapered Full Carbon Fork.
- Chainring Crank: Throne Alloy 48T Brakes: Front Radius Forged Alloy.
- Bottom Bracket: Sealed Bearings 68mm Tapered.
- Wheels: Novatec 20F / 28R / Bladed Spokes Tires: Kenda 23c.
- Hubs: Novatec A186SBT Track Hubs Pedals: 9/16 Platform Pedals.
- Standover Height: 49cm(28.54") - 52cm(29.49") - 55cm(30.71") - 59cm (31.77").
Check Stock