Reviews Fluke Process Calibrator

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).

Marked for 0- to 160-inches of water, this calibrator is capable of a wide range of pressure readings..
The 1-3/4-inch dial is marked with clear white graphics on a black background for easy reading..
A bright red-tipped pointer allows for at-a-glance measurements..
The calibrator can be used as an alternative to a monometer for calibrating pressure instruments..
This pressure calibrator comes with its own convenient carrying case for ease of storage and transport..

The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
The calibrations can be done over a range of 50℃ to 350℃..
Temperature display and stability resolution is 0.1 degree..

The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
The calibrations can be done over a range of 50℃ to 500℃..
Temperature display and stability resolution is 0.1 degree..

Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
| Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..

Tailor-made case for fluke multimeter: Multifunctional digital multimeter hard case design for fluke 117/ 115/ 116/ 114/ 113 electricians true RMS multimeters, meter case keeps for fluke meter storage and safe, easy to use and traveling. External dimension: 7.28x 4.13 x 2.95 inches. Internal dimension: 6.7 x 3.5 x 2.5 inches.
Protective case for fluke-117 multimeter: High-quality multimeter case is made of durable eva material, which is splash-proof, shock-proof, moisture-proof and dust-proof. The well-made lining design protects your precious multimeter kit from scratches and abrasion. Prevent any damage caused by accidental collision or fall. Protection for fluke 117 case gives double protection for fluke multi meter..
Large capacity for fluke test leads accessories: The compact meter carrying case with zipper mesh pocket, which makes full use of the internal space to facilitate storage of various for fluke test leads, batteries, thermo probe & other tools and mini accessories in one place, easy to find and use, no longer have to worry about confusion and loss. No matter where you work, you can take it with you on the go..
Stable storage bag for fluke clamp meter : Internal elastic bandage design, protect for fluke multimetro firmly fixed in one ....

Fashionable appearance design,The case specially designed for fluke electrical tester fits perfectly.
Hard shell suitable for fluke tester t6, the inside is made of high-quality velvet,The soft internal structure ensures the protection of fluke tester t5.
This hard case for fluke voltage tester t5 is made of high quality EVA material, shockproof, dustproof and waterproof, protect your fluke voltage tester t6 cordless from impact and splash.
The hard shell can ensure your electric tester fluke is safe and convenient, with light weight. The classic zipper design makes it easy to open and close..
If there is a quality problem with the case, we provide a 100% money-back guarantee. This is a completely risk-free purchase, click the orange button to order immediately! (Note: Only case is sold, fluke electrical tester and accessories are not included).

The fluke 116 digital multimeter features a built-in thermometer for HVAC applications.
Fluke 116 digital multimeter features micro amps to test flame sensors.
Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage.
Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage.
Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals.