Reviews Digital Calibrator

Steve Meade Designs SMD CC-1 Crossover Calibrator

  • The Crossover Calibrator’s circuitry is digital microprocessor controlled.
  • Crossover -3dB point accuracy +/- 0.25dB.
  • Low Battery LED trigger battery voltage < 6.5Vdc.
  • Auto-shut off timer 8 - 10 minutes after ON button is pressed.
Check Stock

SMD Crossover Calibrator CC-1

  • The Crossover Calibrator’s circuitry is digital microprocessor controlled.
  • Crossover -3dB point accuracy +/- 0.25dB.
  • Low Battery LED trigger battery voltage < 6.5Vdc.
  • Auto-shut off timer 8 - 10 minutes after ON button is pressed.
Check Stock

Taylor Precision Products Pressure Calibrator with Carrying Case (0- to 160-Inch Water Pressure)

  • Marked for 0- to 160-inches of water, this calibrator is capable of a wide range of pressure readings..
  • The 1-3/4-inch dial is marked with clear white graphics on a black background for easy reading..
  • A bright red-tipped pointer allows for at-a-glance measurements..
  • The calibrator can be used as an alternative to a monometer for calibrating pressure instruments..
  • This pressure calibrator comes with its own convenient carrying case for ease of storage and transport..
Check Stock

CEM BX-350 Portable Infrared Temperature Calibrators 122 to 662℉,50-350℃,Resolution 0.1℃/℉

  • The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
  • External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
  • The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
  • The calibrations can be done over a range of 50℃ to 350℃..
  • Temperature display and stability resolution is 0.1 degree..
Check Stock

CEM BX-500 Portable IR Dry-Well Infrared Temperature Calibrators 122 to 932℉（50-500℃

  • The mini infrared calibrator is mainly structured by 58 mm diameter target assembly and dry-well temperature system controlled by microcomputer..
  • External reference thermometer is metal cone with good heat-conducting ability , on the surface of thermometer there is a oxide film with emissivity 0.95..
  • The calibrator is applied a class-A PT100 as a sensor with a temperature control system and wind-cold device . The calibrator has rapid heating and cooling function and is switch able ℃/℉ which can be used in different temperature unit calibration..
  • The calibrations can be done over a range of 50℃ to 500℃..
  • Temperature display and stability resolution is 0.1 degree..
Check Stock

Extech 407732-KIT Low/High Range Sound Level Meter Kit

  • High and Low measuring ranges (35 to 130dB).
  • Backlit display to view in dimly lit area.
  • Digital sound level meter with 94dB sound calibrator and carrying case.
  • High accuracy meets ANSI and IEC 651 Type 2 standards.
  • High and Low measuring ranges: 35 to 100dB (low) and 65 to 130dB (high).
  • Backlit LCD display to view in dimly lit area.
Check Stock

Negative Pressure Gauge Calibrator for HVAC, Laboratories, Room Pressure Monitoring Model: ACE PSI-PP1 (Static Pressure Pump Only)

  • Calibrator: Static Pressure Pump Calibrator (PSI-PP1) | Knobs: 2 No. s for Fine & Coarse Pressure Adjustment |.
  • | Pressure Range: Upto 1 Bar | Vacuum Range: Upto 400 mm.H.g | Pressure Ports: 2 Pressure Ports with Ferrule Fitting, 1 Each for Master Gauge & Instrument Under Calibration |.
  • Approximate Volume: 400 C.C | Maximum Pressure: 100 PSIG | Maximum Vacuum: 80% | Adjustment: Coarse & Fine Control |.
  • Outlet Connection: One 1/4” BSP or Ferrules Union | 1 Year Manufacturing Warranty |.
  • Supply Scope: 1 Unit of Pressure Gauge Calibrator and Instruction Manual | Applications: HVAC, Filter Monitoring, Room Pressure Monitoring, Laboratory..
Check Stock

Sedremm Gray White Balance Card Tri-Fold Light Reflector, 37x37cm 3 in 1 Focus Board Double Face Foldable 18% Grey/Black/White Balance Reference Card with Carry Pouch for Canon Nikon Sony DSLR

  • This gray white balance card is double sided. One side includes gray, white and black balance cards for digital photography. The 18% gray side works for the exposure correction and white side for white balance setting and the black side is used for "dithered black card" exposure. The other side is Tri-fold silver reflector for instant fill light..
  • This versatile 3-in-1 gray white balance card can be used as a white balance calibrator, light meter calibrator, or a reflector for fill light..
  • This white balance card size is 37x37cm,It can be folded and placed in the carry pouch. Easy to carry. Suitable for studio and location photography. Such as portrait shooting, product shooting, travel video shooting, wedding photo photography etc..
  • Includes 3 in 1 gray/black/white Balance card x 1 and carry bag x 1..
  • We offer one year warranty and life-time after-service, If you meet any problem, Please don't hesitate to contact us..
Check Stock

Sugon T3602 Soldering Station ，240W 2 in 1 Digital Solder Iron Station with 2 JBC Soldering Iron Tips ，212℉-842℉ Adjustable Temperature C/F，Auto Sleep and Calibration Support，Rapid Heating 110V

  • ...cs, small parts, large chips, mobile phone motherboards, and electronic components..
  • 240W soldering station with LCD display, with multiple functions, precise temperature adjustment range 212℉-842℉, ℃/℉, automatic sleep, temperature storage, buzzer, temperature lock, quick-change tip holder, with temperature calibrator and supports temperature calibration..
  • Buy a JBC soldering station to get 1 calibrator, 1 JBC C115 soldering iron tips, 1 JBC C210 soldering iron tips, 1 soldering mat, 1 cleaning ball seat, 1 soldering iron tip repair powder, 1 cleaning copper wire, 1 cleaning sponge..
  • The soldering station has passed FCC, CE, and RoHS certification, and we improve the 12-month warranty service for the soldering station, if you have any questions about our products, please contact us, and we will reply as soon as possible..
Check Stock

Fluke 725 Multifunction Process Calibrator

  • The Fluke 725 Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.
  • Small, streamlined shape, rugged, reliable design stands up to field use.
  • Easy to read measure/source screen lets you view input and output simultaneously.
  • Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters.
  • Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters.
Check Stock