Reviews Flat bed Printer

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

Zeelo 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - 20 Pack

  • Die Spring: compatible with most 3D Printer Bed, great Ender 3/2 heat bed springs, flat top and stiffer.
  • Rectangular Section, strong, keeps print bed level better..
  • Advantage: the die springs are stiffer than ordinary spring, which help your 3D printer much more stable while printing.
  • Zeelo are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty..
Check Stock

Creality Original Self Release Glass Bed Upgrades for Ender 3 / Ender 3 pro/Ender 5 / Ender 3 v2 3D Printer 235x235mm Build Surface Plate Heated Bed Better Than Borosilicate Glass Accessories

  • New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no....
  • Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will....
  • Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality....
  • Super Flat for the perfect first layer - Unlike magnetic bed sheet or PEIsticker, which can be tricky when leveling and doesn't work at all....
  • The Self Release Glass Bed is secured to the printer using middle-size clips available at all office supply stores and unlike Magnetic Spring Steel,....
Check Stock

Artillery Sidewinder X2 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Filament Resume Printing After Power Failure, Build Size 11.81x11.81x15.75in

  • 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent..
  • 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the....
Check Stock

Artillery Genius Pro 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Auto Leveling, Desktop DIY Tool, Xmas Gifts for Him, Build Size 8.7x8.7x9.8inch

  • 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent..
  • 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the....
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • ...ce for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing..
  • 【DUAL PART COOLING FANS EXTRUDER】✔️Two part cooling fans of Creality large 3D printer are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage..
  • 【UPGRADED SILENT MOTHERBOARD】✔️ CR-10 v3 3D printer has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard..
  • 【ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE】✔️ Creality FDM 3D printer adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 V3 more Likely to print out with high accuracy prints..
  • 【WARRANTY】✔️ Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replac&....
Check Stock

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
  • ★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....
Check Stock

Sovol SV03 3D Printer Upgraded Larger Printing Size FDM Printer with Direct Drive Extruder & BLTouch & Marlin TMC2208 Silent Board & Glass Bed 350 x 350 x 400 mm

  • EXTRA LARGE - This printer comes with one of the largest build spaces available. 350x350x400mm (13.8” x 13.8” x 15.8") build volume makes SV03 the....
  • DIRECT DRIVE - Upgraded direct drive extruder leads to faster retraction with more accurate extrusion, allowing you to not only print with more....
  • SILENT BOARD & BLTOUCH PREINSTALLED - TMC2208 board has a resolution upwards of 256 individually smaller, high-res steps and thus less noise is....
  • CARBON CRYSTAL SILICON GLASS BED - This printer comes with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces....
  • MEANWELL POWER SUPPLY - Built-in 350W Meanwell power supply ensures stable and sufficient power, fast heatup for the hotbed and nozzle. It protects....
Check Stock

Creality 3D Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed (Blue and Orange Decorative Strips are Given Randomly)

  • EXTRA LARGE: This printer comes with one of the largest build spaces available. At 12inx12inx15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints..
  • OPEN SOURCE: In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all..
  • HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically..
  • GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time..
Check Stock

12 Pcs 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount Heat Resistant 3D Printer Parts Heat Buffer Silicone Heat Bed Parts Compatible with CR-10 Ender 3 Bottom Connect (Brown, 0.7 Inches)

  • Ample Amount: the package contains 12 pieces of 3D printer heatbed parts in brown, which are designed to replace your springs under the heated bed, sufficient quantity can meet your daily use and replacement needs.
  • Silicone Material: the 3D printer bed mounts are made of quality silicone material, stable and flexible, with nice heat resistant feature, can nicely reduce the vibrations when working, providing good leveling performance for your 3D printer.
  • Compatibility: the silicone bed leveling mounts are compatible with CR-10 and Ender 3 series 3D printers, they will install effectively and stably on your 3D printer, will not easily move.
  • Suitable Size: the heated bed mount measures approx. 4 mm/ 0.16 inches in inner diameter, 18 mm/ 0.7 inches in height, which is easy to level your 3D printer and remain your set levels.
  • Simple to Store: with compact size and lightweight, the 3d printer parts are easy for you to store in your tool box, occupying a little space, also very convenient to take out when needed.
Check Stock