Reviews Wide Flat Bed Printer

Ceality Glass Bed for CR-10S Pro, CR-X, CR-10 V2, Ender-3 Max, 310x320x4mm, Official Version Build Surface

  • No Edge Curling - Official printer glass bed offered by Creality, its microporous coating on the upper surface can adsorb the model to glass bed surface, no worry of print edges curling..
  • Universal Application - This printer glass plate is well suited for most types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more..
  • Excellent Flatness - Improved borosilicate glass plate provides more flat and more smooth build surface than magnetic mat or pei sheet, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed.
  • This glass bed could be fixed with middle sized clips and wash with alcohol or acetone at room temperature..
  • Compatibility - This printer parts is only applicable with Creality printers as following, CR-10S Pro, CR-10S Pro V2, CR-X, CR-X Pro, CR-10 V2, CR-10 V3 and Ender-3 Max, pls confirm if this glass print bed compatible with your printer..
Check Stock

Creality CR-10 V3 3D Printer with Titan Direct Drive Extruder Glass Bed Silent Board Dual Cooling Fans Meanwell Power Supply Large Printing Size 300x300x400mm

  • EXTRA LARGE - This printer comes with one of the largest build spaces available. 350x350x400mm (13.8” x 13.8” x 15.8") build volume makes SV03 the best large format direct drive printer in the market..
  • DIRECT DRIVE - Upgraded direct drive extruder leads to faster retraction with more accurate extrusion, allowing you to not only print with more flexible materials but also have better overall extrusion. WIth Filament Sensor, no worry for long print that will run out your filaments and cause any problems..
  • SILENT BOARD & BLTOUCH PREINSTALLED - TMC2208 board has a resolution upwards of 256 individually smaller, high-res steps and thus less noise is generated in the coils of the motor. Auto-leveling SV03 will make adjustments to ensure the bed and nozzle are at an optimum distance throughout the printing, which improves bed adhesion and print quality..
  • CARBON CRYSTAL SILICON GLASS BED - This printer comes with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. Adjustable belt tensioners make SV03 achieve proper belt tension to get high quality prints..
Check Stock

3D Printing

  • KIT INCLUDES: DNP QW410 4.5" Dye Sublimation Printer | Paper Tray for (4 x 6") | Paper Holder | 4" Spacer | Power Cord | 4x6” DNP Premium Digital Media, 2 Rolls (150 Prints per Roll, 300 Total Prints) | Slinger Padded Printer Carrying Case.
  • KEY FEATURES: Dye-Sublimation Thermal Transfer | 300x300 dpi Resolution | Ultra Compact and Lightweight | Lay Flat Printing Function | Photo Tray | 4x6 Approx. Print Speed, 19 Seconds per Print | Glossy or Matte Finish | 32MB Buffer Memory | USB 2.0 Compatible | 4.5-inch Print Head, Allows to Print 16:9 Wide-Ratio Photos | Compatible with Windows and Mac OS-X | Low Power Consumption, 0.15A in Standby Mode | 1 Hour Continuous Printing | Weighs Approx. 13 lbs. (5.8kg).
  • The new photo printer ranks among the most compact and lightest printers available in the global market today. Weighing in at only 13lbs and its compact size of only 8"W x 7.75"H x 9.5"D, the QW410 is perfect for mobile photo booth operations! The new photo printer is our smallest and lightest printer to date..
  • The new printer employs a proprietary 4.5-inch print head to allow consumers t....
Check Stock

Vytor: The Starfire Champion

  • KIT INCLUDES: DNP QW410 4.5" Dye Sublimation Printer | Paper Tray for (4 x 6") | Paper Holder | 4" Spacer | Power Cord | 4x6” DNP Premium Digital Media, 2 Rolls (150 Prints per Roll, 300 Total Prints) | Slinger Padded Printer Carrying Case.
  • KEY FEATURES: Dye-Sublimation Thermal Transfer | 300x300 dpi Resolution | Ultra Compact and Lightweight | Lay Flat Printing Function | Photo Tray | 4x6 Approx. Print Speed, 19 Seconds per Print | Glossy or Matte Finish | 32MB Buffer Memory | USB 2.0 Compatible | 4.5-inch Print Head, Allows to Print 16:9 Wide-Ratio Photos | Compatible with Windows and Mac OS-X | Low Power Consumption, 0.15A in Standby Mode | 1 Hour Continuous Printing | Weighs Approx. 13 lbs. (5.8kg).
  • The new photo printer ranks among the most compact and lightest printers available in the global market today. Weighing in at only 13lbs and its compact size of only 8"W x 7.75"H x 9.5"D, the QW410 is perfect for mobile photo booth operations! The new photo printer is our smallest and lightest printer to date..
  • The new printer employs a proprietary 4.5-inch print head to allow consumers t....
Check Stock

PVA Glue Stick 3D Printing, FYSETC 3D Printer Parts 3Pcs Solid Adhesive for 3D Printer Ender 3/ Ender 5/ CR10 / Prus Mini MK52 MK3 Hot Bed Print Filament PLA Glass ABS PETG CPE

  • Wide Compatibility: Work well on all 3D Printer hot bed, including spring steel build plate, aluminum or glass bed, PEI sheet, 3d printer stickers etc..
  • Convenience: Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water..
  • Help in 3d printing: Paste it on hot bed beforce printing, strong adhesion to the hot plate, perfect first layer. It is easier to remove the printing models..
  • High-quality and Long-lasting: last for 100+ average prints, helps 3D print parts adhere to the build plate during printing..
  • Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

3IDEA Imagine Create Print Crazy3DPrint CZ-300 3D Printer - with Heated Print Bed, Aluminum DIY Kit, Large Build Area of 300x300x300mm

  • Designed for Functionality:_ The CZ-300 is a compact 3D printer that is designed for DIY and prototyping purposes. It can be connected to a computer via USB 2.0 or print pre-loaded files onto a memory card and SDHC slot..
  • Hot Bed and Temperature Control:_ Equipped with a heated print bed, this compact DIY printer can function at consistent temperature range of 40 to 90 degree C. This can be helpful when working with filaments that require a heated print bed..
  • Large Build Area:_ This printer provides a large build area of 11.8x11.8x11.8 inches (300x300x300mm) in length breadth and height. Thus, you can print considerable larger models for better observation and functionality..
  • LCD Graphical Interface:_ The printer is integrated with a 3 inch LCD display screen. It allows you to view the print status, select the file and other printer parameters. This graphical interface is optimised for friendly usage..
  • Compatible with Various Filaments:_ The printer supports a wide range of filament types to allow you to explore and experiment more. It is compatible with PLA, ABS, PETG, Carbon PLA, and metallic PLA..
  • Distinct Nozzle Design:_ The nozzle of CZ-300 is made of copper and has a diameter of 0.4mm. It supports a maximum temperature of 60 degree C. It is des....
Check Stock

Creality Original Self Release Glass Bed Upgrades for Ender 3 / Ender 3 pro/Ender 5 / Ender 3 v2 3D Printer 235x235mm Build Surface Plate Heated Bed Better Than Borosilicate Glass Accessories

  • New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no....
  • Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will....
  • Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality....
  • Super Flat for the perfect first layer - Unlike magnetic bed sheet or PEIsticker, which can be tricky when leveling and doesn't work at all....
  • The Self Release Glass Bed is secured to the printer using middle-size clips available at all office supply stores and unlike Magnetic Spring Steel,....
Check Stock

Zeelo 3D Printer Motherboard Accessories 0.31 in OD 0.78 in Length Compression Springs Light Load for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling - 20 Pack

  • Die Spring: compatible with most 3D Printer Bed, great Ender 3/2 heat bed springs, flat top and stiffer.
  • Rectangular Section, strong, keeps print bed level better..
  • Advantage: the die springs are stiffer than ordinary spring, which help your 3D printer much more stable while printing.
  • Zeelo are devoted to offer premium quality products to all cherished customers. Meanwhile supply 45 days money back guarantee and 18 months warranty..
Check Stock

Artillery Sidewinder X2 3D Printer, High Precision 3D Printing Machine, with Touch Screen Controller and 32-bit Mainboard, Filament Resume Printing After Power Failure, Build Size 11.81x11.81x15.75in

  • 【Large Color Touch Screen Controller & Auto Leveling】- The high precision laser printer is equipped with a large size color touch screen controller with printing status/function display/parameter setting all transparently presented, which makes operation easy and convenient. What's more, with automatic bed leveling, the printer supports dynamic leveling compensation, frees yuo from complex manual leveling, which proves to be efficient and intelligent..
  • 【Fast Heating Bed with Super High Heat Resistance】- The 3D Printer is equipped with glass-ceramic print platform & improved AC heat bed. The build plate surface is so smooth and flat that you can easily remove the printed work. By using the A.C. power, the hot bed can be quickly heated to above 80°C in two minutes. In this way, it ensures the laser printing precision and smoothness..
  • 【Filament Runout Detection & Power Loss Recovery】- The Artillery 3D printing machine has the ability to recover from a power failure or brown-out and resume where it left off on the print. And it is equipped with a filament runout detection sensor, which will stop the printer and issue an alarm, when the....
Check Stock