Reviews Fixed Speed Pulleys

scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit

  • 【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
  • 【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
  • 【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
  • 【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
  • 【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..
Check Stock

Wadoy 3/4 to 1 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator

  • This steel shaft sleeve adapts a crankshaft from 3/4 inch to 1 inch diameter, it comes with step key that offsets from 3/16 inch to 1/4 inch..
  • Alters motors with a different diameter shaft and alters pulleys for a different speed or belt..
  • Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements..
  • Adapts larger wheel bores to smaller axles, works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Made from cold rolled steel, precision machined and tumbled, high durability..
Check Stock

Boat Pulley Blocks, Sailing Pulley Stable Stainless Steel Easy to Disassemble with Bearing for Boat for Canoe for Kayak

  • the pulley comes with high-quality nylon card slot design.
  • -The single pulley roller is made of steel, and it is strong, anti-rust, wear-resistant, corrosion-resistant and durable..
  • -The fixed pulley prevents the rope from twisting. The smooth roller ensures a good movement of the rope..
  • -Rotating pulleys can be used with indoor or outdoor ropes or cords for flexible sliding..
  • -Flexible sliding pulleys that can withstand heavy loads.
Check Stock

SHIMANO Acera RD-M360 SGS Rear Derailleur - Silver, Large

  • Acera mountain bike rear derailleur with light action operation and over-size pulleys for a wide gear choice.
  • Oversize 13-tooth tension and guide pulleys to reduce noise and wear.
  • Extension spring and low-friction fluorine-coated link pivot bushing result in a light shifting action.
  • Top normal spring for use with Rapidfire shifters.
  • IG and HG chain, 7- and 8-speed compatible.
Check Stock

Darton 300-018 Dry Cylinder Sleeve Kit for H22 & H23

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 3/4” to 1” diameter. It comes with 1.77"" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

SPI Fix Kit 2010-2012 fits Polaris 800 Sleds 85mm Pistons Bearings & Fix Kit

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 1"-3/4"x1/4"-3/16" inch diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

Wiseco 74.0Mm Black Anodized Piston Ring Compressor Sleeve By Jm Auto Racing (Rcs07400)

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft from 7/8" to 1" diameter. It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

AA Performance Products 88 x 69mm 1700cc Slip-in Piston & Cylinder Kit, Fits VW

  • [Shaft Sleeve Adapter Kit] This stainless steel shaft sleeve adapts a crankshaft for 5/8" x 3/4" x 3" diameter.It comes with 2.01" step key..
  • [ ] Made from stainless steel, precision machined and tumbled, high durability. It is durable in use, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage..
  • [Applications] Alters motors with a different diameter shaft. Alters pulleys for a different speed or belt. Reduces the necessity of buying a new motor or pulley to maintain existing components and speed/power requirements. Adapts larger wheel bores to smaller axles. Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
  • Perfect Performance] Allows you to use your old clutch or pulley on a new engine, you may need to use a small hammer to gently tap it in to place for tightly fit..
  • [Package Include] 1 Set Shaft Sleeve Adapter Kit.
Check Stock

INDUSTRIAL SEWING MACHINE MOTORS HIGH SPEED CLUTCH MOTOR

  • Industrial High Speed Clutch Motor Watts: 400 Watts & 550 Watts available Power: 110 Volts Rotation: Bi-directional RPM: 3450 (High Speed Motor) Shaft: AMCO Shaft Weight: Approximately 42 Lbs Available Pulleys: 630, 632, 634 Hardware & Belt Cover included.
Check Stock

TooTaci 25MM Pulley Block System for Lifting with Rope and Hooks, 2pcs 304 Stainless Steel M25 Lifting Pulley Block Cable Wire Towing Wheel,66ft Nylon Rope & 2pcs Carabiner Hook

  • ... Rope Kit : 2Pcs 25MM Crane pulley wheel,2Pcs x Carabiner Snap Hook Clips,20 meter Nylon Pulley Line rope.Loading 150 kg/300LB.
  • M25 Pulley Block: Heavy Duty Pulley is anti-rust and wear resistance with strong structure, surface is shock light processing, whose main material is 304 stainless steel..
  • Ergonomic Design : Pulleys for lifting fixed top for easily rope handling, smooth roller provides pretty good rope traverse, pulley rotation cylinder head is solid, durable, 360 degrees rotation to prevent rope from knotting.
  • Pulleys for lifting with Rope and Hook: 66ft solid braided polypropylene pulley rope - extreme strong with high tenacity.
  • Pulleys for Carabiner: Versatile binding, rigging & anchoring hardware - quick connect/dis-connect of ropes, chains, straps..
  • Outdoor Pulley System Lifting widely use for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system,clothesline pulley system outdoors,garage pulley system,treehouse pulley system,gym pulley system...pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,....
  • fit for steel wire rope or any strong rope,for indoor outdoor lifting applications..
Check Stock