Reviews Rotating Pulleys

Camshaft Pulley Holder Crankshaft Harmonic Damper Pulley Holding Removal Tool Compatible with Toyota Lexus

  • ...requivalent OEM W89208, compatible with Toyota, Nissan, Camry, Mazda, OHC and many others, the distance between of two grooved pins is 2.36 inches, so please carelly check the size bedfore order.
  • Crankshaft Damper Pulley Holder Tool: Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on engines. only Compatible with Lexus from 1990: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8.
  • Compatible with Toyota from 1996 : 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. fit 4 cyl engine : 1983-1995 22RE, 1995-2004 2RZ,1995-2004 3RZ.
  • Worked Well: The camshaft pulley holder tool have enougt depth to lock the camshaft sprocket, make it fixed, and with rubber handle, not hurt your hands, make replace cam shaft gears and seals more easy.
  • Not Easy Bent: Tools make of high qualty steel, strong and durable, not easy to bent, the surface have anti-rust coating to prevent rust and oxidation. and we offer 12 months warranty, we will replace or refund if the tool have any quality problem.
Check Stock

X AUTOHAUX Vehicle Crankshaft Pulley Long Water Pump Triple Groove Crank Pulley for Chevy SBC 350 Engine

  • CNC machined from solid billet aluminum, rather than the typical cast units.
  • Helps your engine rev much faster because these pulleys have an extremely low rotating mass while significantly increasing throttle response and freeing up lost HP and TQ.
  • Engineered to outperform and outlast the competition.
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

Valley Forge Flag 60753 Adjst Alum Flag Bracket, 0

  • ...um, square, shopping mall, to decorate your places and publicize your proud to the country.
  • 20FT Telescopic Flag Pole - Tangle Free & Fly 2 Flags, 1st & 2nd section can hold up to 3ft flag individually, easy to fly your national flag & state flag at the same time, or fly Team or other kinds of flag as your like.
  • Top Rotating Shaft prevents the flag from tangling in windy days.
  • Easy To Install - Easy Setup in Minutes with Twist Locking System, features rotating lock between each section (no ropes or pulleys), allows you to extend and adjust the pole in minutes.
  • What You Get - Back by YesHom 1-Year Warranty.
  • Unpack and use - contains everything you need in the package, including Flag Pole, Gold Ball Finial, American National Flag, Carabiners and PVC sheet for protecting the bottom of the pole against corrosion.
Check Stock

OTC 4754 Universal Pulley Holder Wrench with Interchangeable pins

  • Universal design fits many different sized pulleys having slots or holes, such as camshaft pulleys and crankshaft pulleys.
  • Wrench is adjustable from 1-1/2 to 8-5/8 inches, allowing it to work with a wide variety of pulleys.
  • Includes 4 different sets of interchangeable step pins.
  • Long handle enables you to easily hold the pulley when tightening or loosening retaining bolts.
  • Rugged blow-molded storage case keeps set components contained and organized so they are ready to use when you need them.
Check Stock

Yeshom Upgraded 30ft Telescopic Flag Pole Kit 16 Gauge Heavy Duty Aluminum Flagpole 3'x5' US Flag & Ball Top for Commercial Residential Outdoor

  • Heavy Duty: 30ft aluminum telescoping Flagpole Kit with 16 Gauge aluminum tube is durable, rust-proof and strong enough for outdoor using.
  • Easy Installation: Easy Setup in Minutes with Twist Locking System, features rotating lock between each section (no ropes or pulleys), allows you to extend and adjust the pole in minutes.
  • Fly 2 Flags: 1st & 2nd section can hold up to 3ft flag individually, easy to fly your national flag & state flag at the same time, or fly Team or Trump flag as your like.
  • Top Rotating Shaft prevents the flag from tangling in windy days.
  • Freely Fly Your American Pride: 30Ft Not Rust Thick Aluminum Sectional Flag Pole with a handcrafted Golden Top Finial, show your independence, democracy and strong patriotic spirit and be proud of the Great American.
  • Ideal for front yard, garden, patio as well as commercial use like company, government buildings, railway station, museum, square, shopping mall, to decorate your places and publicize your proud to the country.
  • What You Get: 1-Year after sales protection, the package contains everything you need.
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Replacement Part Top Ornament Fitting for 15' and 20' Poles

  • 20FT Telescopic Flag Pole - Tangle Free & Fly 2 Flags, 1st & 2nd section can hold up to 3ft flag individually, easy to fly your national flag & state flag at the same time, or fly Team or other kinds of flag as your like.
  • Top Rotating Shaft prevents the flag from tangling in windy days.
  • Easy To Install - Easy Setup in Minutes with Twist Locking System, features rotating lock between each section (no ropes or pulleys), allows you to extend and adjust the pole in minutes.Also suitable for holding cell booster antenna at the top & for tailgating/camping decoration.
  • What You Get - Back by YesHom 1-Year Warranty.
  • Unpack and use - contains everything you need in the package, including Flag Pole, Gold Ball Finial, American National Flag, Carabiners and PVC sheet for protecting the bottom of the pole against corrosion.
Check Stock

Garage Door Extension Spring Pulley Sheave Kit +SAFETY CABLES & INSTRUCTIONS (1set）

  • Replacing the pulleys on your door will make the door run much smoother and prevent cable wear. Replace the door cable and install.
  • PLEASE-INSTALL SAFETY CABLES ON YOUR EXTENSION SPRING DOOR 6 RIVETS IN EACH HEAVY DUTY BALL BEARING PULLEY.
  • INCLUDED IN THIS KIT: 2 - 3" STUD PULLEYS 2 - 3" CLEVIS PULLEYS 4-3/8" BOLTS 4-3/8" NUTS 4-3/8" LOCK WASHERS 1 PAIR-1/8" DOOR CABLE 1 PAIR-1/8" SAFETY CABLE 2-CABLE LACING BRACKETS 2-S HOOKS 2-5/16" EYE BOLTS 4-5/16 NUTS.
  • INSTRUCTION SHEET REPLACING THE PULLEYS ON YOUR GARAGE DOOR MAKES THE WORLD OF DIFFERENCE YOUR DOOR WILL RUN MUCH SMOOTHER. THIS IS NORMAL MAINTENANCE THAT CAN EASILY.
Check Stock