Reviews Fiberglass Disc

15pcs Multifunction Flap Discs & Grinding Polishing Discs Set with 4.5\ x 7/8\ 40/60/80/120 Assorted Grits Flap Sanding Disc Strip Disc Nylon Disc and Felt Polishing Flap Disc for Angle Grinder

  • ...g all kinds of surface conditions. The paint strip disc removes rust, paint and coatings quickly and easily, without damaging the original surface..
  • 【PREMIUM MATERIAL】The flap disc made from premium high density calcined aluminum oxide. Easily remove rust, paint, scale and oxidation. Suitable for wood, metal and fiberglass. Fiberglass backing plate can effectively absorb vibration and bring more stable & efficient grinding. So good toughness and polishing effect, High efficiency, long service life..
  • 【STANDARD SIZE】Outer Diameter: 115mm/4.5in ,Inner Diameter: 22mm/7/8in. Fit for most angle grinders. Its recommended ideal speed is 3000 RPM with a MAX RPM of 13300..
  • 【WORRY-FREE SERVICE】We are so confident in our product that we offer a 1-year warranty for every customer. Enjoy your shopping and feel free to contact us!.
Check Stock

Man of La Mancha

  • ✅ Meet All You Need – This premium flap disc set includes 10 pieces of 40 grit, 5 pieces of 60 grit, 3 pieces of 80 grit and 2 pieces of 120 grit,....
  • ✅ Extreme Durability and Value – Made of hard zirconia alumina material which lasts longer than standard aluminum oxide abrasive material, built....
  • ✅ T29 Flap Discs with Fiberglass Backing Plate - T29 flap disc features angled flaps, which can be used for edge-working or contoured applications.....
  • ✅ Great Performance - Each 4.5" x 7/8-Inch arbor size flap disc is compatible with angle grinders operatable of up to 13,000 RPM. Our flap disc set....
Check Stock

Neiko 11117A Premium Zirconia Flap Disc | 4.5\ x 7/8-Inch, 60 Grit, Flat Type #27-10 Pack

  • Constructed of industrial grade premium zirconia for strength, durability, and extended disc life.
  • 60 grit flap disc is ideal for grinding on a variety of work surfaces.
  • Flat Type 27 disc build is effective for blending, smoothing, and finishing flat surfaces.
  • Resin fiber construction with fiberglass backing plate absorbs vibrations without smear during usage.
  • Each disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with grinders operatable of up to 13,300 RPM.
Check Stock

SR Performance Clutch Alignment Tool; 10 Spline

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.
Check Stock

28 Pack 4 1/2 Inch Flap Disc Angle Grinder Sanding Disc 40 60 80 120 Grit Flap Sanding Disc (4 1/2 inch x 7/8 Inch)

  • LARGE QUANTITY & ASSORTED TYPES – 28-pack of 4 1/2 inch 40 60 80 120 grit flap discs, 7-pack of each grade. Great choice for cutting various metals, perfectly meets all your needs..
  • EXTREME DURABILITY AND VALUE – The flap sanding discs are made of TOP-LEVEL hard zirconia alumina material, which lasts longer than standard aluminum oxide abrasive material, built for a more robust and economical grinding wheel..
  • FLAP DISCS WITH FIBERGLASS BACKING PLATE - Grinder sanding discs have long-lasting use. A safe and effective product made with durable Material. It’s fast polishing, and it has durable fiberglass backing and fine crystal size. The flap discs are made with a fiberglass backing plate that effectively absorbs vibrations without smear during usage, bringing more stable and efficient grinding..
  • MEET ALL YOUR NEEDS – This flap disc is used for all kinds of projects, ranging from metal and woodworking, concrete grinding and finishing, stone smoothing and finishing, to rust removal. It perfectly grinds anything you need for your projects..
  • BEST MATCH SIZE – Each angle grinder sanding disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with grinders operating up to 13, 300 RPM..
Check Stock

3M SandBlaster 9681 4-1/2-Inch Coarse Clean-N-Strip Disc

  • The product is manufactured in United States.
  • Use On Many Surfaces, Including Metal, Wood, & Fiberglass.
  • Use Until All Of The Purple Abrasive Is Gone.
Check Stock

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.
Check Stock

Neiko 11257A High Density Jumbo Premium Zirconia Flap Disc | 4.5\ x 7/8-Inch, 40 Grit, Bevel Type #29-10 Pack

  • Constructed of industrial grade high density premium zirconia to provide more grinding material than standard flap discs.
  • 40 grit flap disc is coarser in build and is ideal for heavier stock removal.
  • Bevel Type 29 disc build is effective for countours, edge and weld blending, and radius grinding.
  • Resin fiber construction with fiberglass backing plate absorbs vibrations without smear during usage.
  • Each disc measures at 4-1/2-inch diameter with a 7/8-inch arbor size, making it compatible with grinders operatable of up to 13,300 RPM.
Check Stock

ClutchXperts SPC Clutch Alignment Tool KIT Compatible With 2006-2015 Mazda MX-5 Miata 2.0L 6-Speed

  • OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
  • Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
  • Rugged construction will easily support the weight of heavy clutch discs.
  • To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
  • 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.
Check Stock

SCOTTCHEN Felt Flap Disc Abrasives 4-1/2 x 7/8 Arbor Buffing Polishing Wheel for Angle Grinder - 5 Pack

  • 【Function】This Felt Flap Disc is designed for the final stage polishing on the item surface for a high gloss or mirror finish. Ideal work for stainless steel, aluminum, automotive work, non-ferrous metals and stone etc..
  • 【Application】This Felt Polishing Flap Disc is used on angle grinder, so it determine that it can flexible be applied for various size/shape surface areas..
  • 【Materials】The Felt abrasive disc is made of premium quality wool/felt, this compressed wool be chosen because of it's natural durability. The reinforce fiberglass backer great to bare high pressure and absorb vibration to keep balanced and smooth buffing..
  • 【Advantage】The small pieces with layered design of our felt flap discs offers a better performance than a solid wool disc, even with more economic price, also especially great for heat dissipation during working..
Check Stock