Reviews Fiber Cement Sheets

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
  • Cuts up to 9,000' or 5 stacks of fiber cement.
Check Stock

LSHUZIYU 7-1/4\(185mm)-4PCD, Arbor 5/8\

  • Diameter 7-1/4" (185mm), 4PCD, Arbor 5/8" with diamond washer. Max Speed RPM 10000.
  • For Fiber Cement and Laminate Flooring, Very Sharp And Clear Cut.
  • 4 Polycrystalline Diamond Tipped For Longer Cutting Life, Compared Carbide-Fiber Cement Blades 60X Times Longer.
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation.
Check Stock

Hitachi 18106 10-Inch Polycrystalline Diamond Dry Cutting Hardiblade Saw Blade 6-Teeth

  • More durable than traditional carbide blades.
  • Made for cross cutting fiber cement board.
Check Stock

Tape Fiberglas Cement 3inx50ft

  • Long-lasting, alkali-resistant mesh will withstand corrosive effects of the alkaline present in cement board joint finishing, lightweight concrete panel seaming and crack repair, block foundation, and reinforcement for fiber cement, and concrete stucco. Heavier fiberglass yarns for more strength than regular mesh tapes..
Check Stock

UPTTHOW Fiberglass for Cement Mortar Concrete Reinforcement Anti-seepage and Anti-cracking Cement Mix for Building Walls Garden Floor 3/4\(19MM)-1lb

  • 【Anti-cracking】- Mixing fiberglass and mortar together, the irregular distribution of fiberglass in the mortar enhances the toughness of mortar, and inhibits the formation of fine cracks..
  • 【Waterproof and Impermeable】- A large number of fiber filaments increase the density of cement, which can effectively solve the problem of penetration. It is very suitable for wet place such as basements, pond, Exterior wall..
  • 【Impact Resistance】-High-strength fiber filaments are attached to each other as a dense net to hold the cement tightly. It can effectively enhance the impact and seismic performance of cement..
  • 【How to Use】-Evenly mix sand, cement and fiberglass together, then add an appropriate amount of water, and finally stir (the stiring time is 30-60 seconds longer than without fiberglass).
  • 【Dosage】-Use 1 lb. (1 pkg) per cubic yard (27 cubic feet) of concrete. You can add a little more in the area with strong impact or severe freeze-thaw.
Check Stock

EAB Tool 2100007 13' Laminate Floor Cutter with Installation Kit

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8″). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8″). will also cut fiber cement siding such as hardy plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.
Check Stock

Diablo by Freud D0704DH 7-1/4\x4T PCD Tip TCG Hardie Fiber Cement Saw Bld,5/8 Arbor, Multicolor

  • The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade.
  • The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades.
  • The laser cut thin kerf design gives fast and precise cuts with less dust and waste..
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
Check Stock

EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter

  • BONUS installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm (5/8"). will also cut fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
Check Stock

No Damage Hook - The only Hooks for Fiber Cement Board siding That Does not Require Drilling. 4 Hooks with Installation Tool Included.

  • Finally, a way to hang items on your fiber cement board siding without drilling!.
  • Installation video: https://youtu.be/6RutcQ1IBhw.
  • These hooks are made in the USA and are patent pending..
  • Hang items on your fiber cement board siding without drilling or any other damage..
Check Stock

EAB Tool 2100010 EAB Tool Professional Floor Cutter, 13", Black

  • Bonus installation Kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm (5/8"). will also cut vinyl tile and fiber cement siding such as hardy plank..
  • Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm (5/8"), vinyl tile, pressboard siding and fiber cement siding such as hardier plank.
  • Angle gauge allows for cuts up to 45 degrees.
  • Quiet, dust free operation, No electricity required.Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation Kit: tapping block, Wedge SPACER, pull bar and double-sided honing stone.Ships to the US only.Professional level.
Check Stock