Reviews Cement 32

1 qt Dap 31084 Bondex Ready-Mix Concrete Patch

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add pigment powder as follows: 1. Calculate the amount of pigment powder to be added according to the pigment powder: cement = 1:25.
• 3. Pour the pigment powder into the cement. 4. Evenly mix cement and pigment powder. 5. Mix cement and pigment powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. T....

Bon 32-500 1 Pound Bag 3/4-Inch Anti-Crak Concrete Fibers (4, 3/4-Inch)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 10 lbs gray cement, add 0.3 to 0.5 lbs of pigment, and add 10 lbs of sand.
• White cement: 1 pack of 10 lbs white cement, add 0.2 to 0.4 lbs of pigment, and add 10 lbs of sand..
• Make sure to mix iron oxide pigment with dry cement powder first, and then add water to stir!.
• The mixing ratios of this pigment cement is 3-5%. If you are going to color 50 pounds of concrete, we recommend adding about 1.5-2.5 pounds of pigment cement.
• If you are going to color 200 pounds of concrete, we recommend adding about 6-10 pounds of pigment cement ..And so on.....(If still don't understand the mixing ratios of this pigment cement, please contact us.We will serve you wholeheartedly. Thanks ).

KOHLER K-9165-0 Bellwether 60-Inch X 32-Inch Single-Threshold Shower Base with Left Offset Drain, White

• Model Size: 32 in. D x 32 in. W x 2 3/4 in. H.
• Base Type: Double Threshold (2-Wall Corner).
• Drain Location: Corner (See technical drawing for exact location).
• Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
• SlipGrip floor surface offers slip-resistance for safety.
• Premium high gloss non-porous acrylic for easy maintenance and lasting beauty.

5 X 6 FIBER CEMENT BLADE CARDED

Tile Shower Pan Kit 48X36\ | Cut-to Fit | Including: Shower Pan, Adjustable Shower Drain, and Waterproof Membrane. (Center Drain)

• Model Size: 32 in. D x 32 in. W x 2 3/4 in. H.
• Base Type: Double Threshold (2-Wall Corner).
• Drain Location: Corner (See technical drawing for exact location).
• Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
• SlipGrip floor surface offers slip-resistance for safety.
• Premium high gloss non-porous acrylic for easy maintenance and lasting beauty.

CKB 60 x 32 inch Trench Side Shower Base Including Polished 304 Stainless Steel Linear Drain Cover, Single Threshold, Flat Surface, White

• Model Size: 32 in. D x 32 in. W x 2 3/4 in. H.
• Base Type: Single Threshold (3-Wall Alcove).
• Drain Location: Center (Centered on width only.
• See technical drawing for exact location).
• Installation: Direct to studs (Unfinished walls: Prior to backerboard, cement board, etc.).
• SlipGrip floor surface offers slip-resistance for safety.
• Premium high gloss non-porous acrylic for easy maintenance and lasting beauty.

1 pt Dap 00271 Weldwood Contact Cement

• Barge All Purpose Cement is a professional strength glue (adhesive) that can be used on leather, rubber and vinyl..
• Ideal for patching rubber boots, resole leather shoes, boots, wood, rubber, metal, plastic, plaster, paper, concrete and much, more!.
• ONE QUART, 32 oz. can comes with an applicator brush attached to the lid..

IRWIN 3072300 T Shank 3 5/32 Carbide Grit Jig Saw Blade

• Ideal for cutting hardiplank, fiberglass, and cement board.

GOODTAKE Orange Pigment Cement Pastel Tile Paint Color Pigment DIY Manually Paving Concrete Mold Concrete Color Pigment Dye for Cement Mortar Grout (Orange, 8 oz)

• Characteristics: waterproof, sunscreen, alkali resistance, acid resistance, easy to color, super hiding power.
• Instructions for use: When the cement is in powder form, there is no mortar to mix. At this point, you can add toner as follows: 1. Calculate the amount of carbon powder to be added according to the carbon powder: cement = 1:25.
• 3. Pour the carbon powder into the cement. 4. Evenly mix cement and carbon powder. 5. Mix cement and carbon powder with mortar..
• Attention method: Ordinary gray cement: 1 pack of 50 kg gray cement, add 2 to 3 kg of pigment, and add 100 kg of sand. White cement: 1 pack of 50 kg white cement, 1.5-2 kg paint and 100 kg sand..
• Make sure to mix the paint and cement dry powder first, then add water and stir!.

Trumpeter Messerschmitt BF 109G 6 Late Model Kit

• 1/32 Scale kit includes, Color painting guide, Photo edged, engraved panel lines, car instrument panel, rubber tires, in propeller blades, drop tank.
• Not included Plastic glue/Super glue/plastic cement, Paint Tire Balk, Red, Gray Grin, Balk Grew Insignia,LT Blue, Orange Yw,Burnt Iron,Ft Blk,Dk Green.
• Tools to assemble not include, Sprue cutters, Long nose pliers,Modeling knife, Small files,Tweezers,Pin vise & Scissors. Soft cloth and Sandpaper.