Reviews Female Nipple Fittings For Plumbing

Brass Bushing 1 Male x 3/4 Female Threaded Brass Reducer Bushing Lead-Free Pipe Fittings 1inch x 0.75 inch

  • ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
  • DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

Brass Pipe Fitting Brass Bushing 1 Male x 3/4 Female Hex Bushing Reducer Threaded Brass Reducer Bushing Pipe Fittings 1inch x 0.75 inch

  • ENHANCED QUALITY BRASS Makes 1inch NPT Male x 3/4inches NPT Female Resistant to Corrosion and Safe for High Temperatures.
  • CONVENIENTLY DESIGNED TO CONNECT Pipes or Fittings of Different Diameter, Material, and End Type. Our 1" NPT Male x 3/4" NPT Female have 3/4" NPT....
  • RELIABLE FITTING of the Bushing Reducer is Provided by the Well-Machined Threads and the Relative Softness of the Brass that Enables Tighter Sealing.....
  • UNIVERSAL – our 1in NPT Male x 0,75in NPT Female can be easily Used with Water or Oil for Plumbing Applications, for Various Measurable Devices,....
  • DURABLE –Our 1‘ NPT Male x 3/4‘ NPT Female don’t Deform with Time, unlike Traditional Stainless Steel Thread Bushing or Plastic Pipe Fittings..
Check Stock

EZ-Fluid 12" x 3/8" Female Compression To 3/8 Inch Female Comp. Stainless Steel Braided Faucet Connector Line,Dishwasher Supply Line,Faucet Extension Supply Hose Connector Lines,Fits 3/8"Comp Male (1)

  • EZ-Fluid Plumbing Stainless Steel Braided Faucet Extension Line, Fits 3/8" Male Comp. End Fittings For Faucet, Toilet, Dishwasher Supply Line, Water Filter System And More.
  • cUPC, NSF Certified Lead Free faucet supply 3/8 to 3/8 Extension.
  • Faucet 3/8" Female Compression X 3/8" Female Compression Faucet Extension Line.
  • High Burst Strength, Extra-Long Stainless Steel, No-Burst Ferrules With Double Radial Crimps For Extra Security.
  • 3/8 female compression hose x 3/8 female Comp water connector, The 3/8 female Compression End Fits 3/8" Male Comp. End Fittings.
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Air Hose Fittings 1/4" Air Coupler & Plug Kit,36 Pieces Quick Connect Air Compressor Accessories W/Storage Case

  • Industrial type, also known as M/D type, compatible with industrial/M/D type air fittings.
  • Used for a variety of air tools such as air compressors, air blow guns, air nailers etc..
  • 1/4 inch NPT thread × 1/4 inch body size, interchangeable with most manufacturers.
  • Kit includes 10pcs Male Plugs, 10pcs Female Plugs, 4pcs Female Couplers, 4pcs Male Couplers, 4pcs Male Hex Nipple, 4pcs Female Hex Coupling..
  • Customer Satisfaction Guarantee: 30-day return guarantee is provided..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

8FT Shark Industrial Premium PEX Tubing Ice Maker Water Connector with 1/4\ Comp by 1/4\ (8FT, White)

  • HQRP® Universal Premium Stainless Steel Refrigerator / Ice Maker Hose.
  • 1/4" FCM x 1/4" FCM stainless steel fittings.
  • Universal Fit - The 1/4" Female Compression Connections On Either End Are A Perfect Fit For Your Refrigerators / Ice Makers And Water Supply Lines.
  • CERTIFIED FOR YOUR SAFETY – These Hoses Are UPC (Universal Plumbing Code), NSF 61 (National Sanitation Foundation) Certified.
  • BURST PROOF - Designed To Last, Our Hoses Use True 304 Stainless Steel For Braided Outer Protective Cover Which Last Incredibly Long Time For Effective Protection Against Rust And Burst. Some Other Hoses May Not Use Real 304 Stainless Steel For The Braided Cover And Could Result In Rust Even Burst..
  • UNIVERSAL FIT - Our Hoses Connect To All Refrigerators / Ice Makers With Industry Standard 1/4" FCM (Female Compression) Connector Fittings. Easy Installation. Compatible with Samsung, Whirlpool, GE, Frigidaire, Eastman, Kenmore and all major brands..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock