Reviews Nipple Fittings For Residential Use

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

SharkBite U860O300 Oxygen Barrier PEX Pipe 1/2 Inch, Orange Heat Radi, 300 foot coil

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • Minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite plumbing fittings or plastic barb and brass barb fittings using PEX crimp tool or clamp connections.
  • RESIDENTIAL and COMMERCIAL: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • MADE IN THE USA: Manufactured and tested in the USA.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Hilitchi 106-Pieces Metric Brass Hydraulic Grease Fitting Assortment Set - Straight, 45-Degree Angled Zerk

  • 【✔】High Quality Brass Grease Nipple Fittings Kit.
  • 【✔】Set Includes 6 Most Used Sizes: M6, M8, M10, Straight, 45-Degree【 Please See Picture 2 for Specific Dimensional Size】.
  • 【✔】Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable.
  • 【✔】Package Quantity: 106-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【✔】The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
Check Stock

SharkBite U3088FLEX18LF Flexible Water Heater Connector, 3/4-Inch x 3/4-Inch x 18-Inch length

  • INSTALLS IN SECONDS: Water hose connectors require no special tools, no soldering, or glue. Just push to create a watertight seal.
  • COPPER, PEX, CPVC or PE-RT: SharkBite water heater plumbing fittings fit OD controlled copper, PEX, CPVC and PE-RT. Use for both hot and cold water supply lines.
  • QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times.
  • RESIDENTIAL and COMMERCIAL: SharkBite Water Heater Supply Connectors meet the same standards for commercial and residential plumbing applications. Inspector friendly for a peace of mind..
Check Stock

Hilitchi Hydraulic Zerk Grease Fittings Assortment Kit with Grease Zerk Caps (SAE-174PCS)

  • 【✔】Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating..
  • 【✔】174Pcs Assortment kit SAE grease fittings. Sizes include: SAE standard, inch size,Straight 1/4”-28 (25pcs).
  • We include 60pcs grease fittings caps can prevent the grease fittings from corrosion and contaminants..
  • 【✔】GREAT USES: Our Straight & Angled Fittings are helpful to feed lubricant to your bearings and other mechanical devices without disassembly. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
  • 【✔】NICE ASSORTMENT KIT: 174-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
  • 【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We would solve all the problems to your satisfactio....
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

SharkBite 1 Inch PVC x 3/4 Inch CTS Ball Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE 25551LF

  • INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue.
  • COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC, HDPE, and PE-RT Pipe and connects them in any combination.
  • PERFORMANCE: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times.
  • QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections.
  • SharkBite is the only push-to-connect brand....
  • RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
Check Stock

SharkBite 1/2 Inch Disconnect Tongs for Push to Connect Brass Plumbing Fittings, U711

  • SHARKBITE REMOVAL TOOL: 1/2 inch disconnect tongs allow for brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings in tight spaces for easy disassembly.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tong is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made with durable stainless steel and wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock

SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A

  • SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily.
  • can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required.
  • COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA.
Check Stock