Reviews Fan Speed Control Module

Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater

  • This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base..
  • The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller..
  • IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions..
  • Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full spe....
Check Stock

Plasma & LCD TV Vertical-Mount Cooling Fan System, with USB-Control & multispeed Fans

  • .... Each fan has a mounting plate, with a rubber air-chamber ring around the bottom edge, to make sure the fan is sealed against the back of the TV. The fans are also fitted with snap-lock adhesive pads, which stick the fans to the back of your TV, yet allow easy removal and reinstallation..
  • The system includes a USB control module, which turns the fans on and off, under the control of your TV’s USB port (type A connector). The USB module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fans. In addition, YOU control the fan speed, using the multi-speed fan controller..
  • IMPORTANT: Please make sure that your TV’s USB port turns on (powers up) ONLY when the TV is turned on. That way, the fans will run when the TV is on and turn off when the TV is off..
  • Recommended fan speeds for this system: The fans (running together at 2/3 speed) are rated at 19db while moving 98 cubic feet of air per minute, or 22db & 110CFM at 3/4 speed. With cabinet cooling, slow (and quiet) are the way to go! Other available speeds: 1/3 speed = 13db/50CFM, 1/2 speed = 16db/72CFM, Full speed = 25db/148CFM..
  • Each cooling unit measures 5-1/2″ square (includes the mounting plate). The units are 1-1/4″ ....
Check Stock

ISDT FD-200 Smart Discharger 200W 25A Wireless APP Control Discharger Capacity 2-8S Lipo Battery Discharging

  • Bluetooth wireless connection, App control all.One key smart discharging, born for RC users. Support 2-8s 7-35v discharging with maximum 200W discharging capacity..
  • Smart fix current control chip. Discharging current varies from 5-25A, automaticly cut off after finishing discharging,better protection for your battery..
  • XT60 Port. Use one of the most commonly used connector – XT60 as discharging port, no need to make adapter for most of RC users.Industrial level high speed ball bearing fan with temperature control Discharge process will produce a lot of heat, our fan will be the most reliable friend to get the heat out..
  • Efficient heat dissipation. Pure aluminum passive cooling module, aluminum alloy shell + high speed ball bearing fan, Pure aluminum passive cooling module and heat source fit closely, greatly improving the thermal efficiency, Aluminum alloy shell is fine, safe, durable, but also enhance the overall cooling efficiency.
  • Mobile phone Bluetooth control, APP display.Optimized touch screen UI for mobile phones, clearer data display, and more convenient operation..
Check Stock

Ryne Collection 52-Inch 3-Blade Matte Black LED Transitional Indoor/Outdoor DC Ceiling Fan

  • TRANSITIONAL CEILING FAN: Enjoy a beautiful ceiling fan at a fantastic price from the Ryne Collection. Ideal for any bedroom, living room, great room, or covered porch in transitional and contemporary style settings..
  • ABS BLADES: Three slightly curved ABS blades are coated in a beautiful matte black finish. Blades are resistant to warping from environmental conditions..
  • WIFI COMPATIBLE: A 6-speed full-function remote control with full-range dimming and fan speed capabilities is included. Add the P2673-01 Wi-Fi module to the fan for added flexibility control by a voice assistant, tablet, or smart phone. DC motor..
  • DIMENSIONS/DOWNRODS/BULBS: Measures 52-inch diameter by 13-1/2-inch height. Includes one 6-inch down rod. Integrated LED module (18w). 3000K. 90 CRI. Dimmable..
  • WARRANTY: We guarantee your complete satisfaction with your purchase and offer professional after-sales customer service support. Make your pure today to breathe new life into your lighting design!.
Check Stock

TUPARTS Engine Cooling Fan Control Relay Module Fits for 2011-2016 Volvo S60 2007-2015 Volvo S80 2008-2010 Volvo V70 2010-2013 Volvo XC60 2008-2013 Volvo XC70

  • FIT VEHICLES – Engine Cooling Fan Control Relay Module for 2011-2016 Volvo S60 2007-2015 Volvo S80 2008-2010 Volvo V70 2010-2013 Volvo XC60 2008-2013 Volvo XC70.
  • Interchange Part Number – 1331402 13752 12 1437591 1488905 1671530 940004101.
  • NOTICE-To confirm that this part fits your vehicle,please enter your vehicles Year, Make, Model in the Compatibility Table(on the top of the page)before purchasing.
  • HOW TO WORK – The water and antifreeze mixture (engine coolant) in the radiator is normally cooled by air forced through the radiator as you drive the vehicle. When the vehicle is not moving, air is not flowing through the radiator, so a cooling fan is used to draw air through the radiator, thus removing heat from the engine.
  • EASY INSTALLATION – Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Removing the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was removed..
Check Stock

Smart Ceiling Fan Control and Light Dimmer Switch Combo, TESSAN WiFi Wall Switch for 4 Speed Fan Control, Dimmable Light, Work with Alexa, Google Assistant, Neutral Wire Required

  • 4 Speeds Fan Control: TESSAN smart ceiling fan switch offers 4 fan speeds, simply press the button to “+” to increase fan speed and press it to “-” to decrease the speed. Fan Speed and light dimmer can be individually controlled on a fan and light switch combo. It's great to be able to adjust the fan while lying in bed. (Notice: Not use for exhaust fans. Max ceiling fan load of 1.5A)..
  • 1%-100%Dimming Range: You can set the desired brightness from 1-100% to enjoy the appropriate ambience on different occasions when using the ceiling fan dimmer switch. The smart dimmer switch remembers the speed or brightness you had last, if you had it set to 50% when you turn off the fan with light, it will automatically go back to 50% again when you turn it back. ( Max light load of 150W dimmable LED/CFL or 300W incandescent bulbs.).
  • Voice Control and Wi-Fi Control: The smart ceiling fan switch works with Amazon Alexa and Google home. Your kids are able to control lights and fans in the room for speed and brightness via voice commands. Used this WiFi fan light switch to remotely control anywhere via free Smart Life App. With notification, never worry about whether the lighting fan turned off or not when you are outside. Support 2.4Ghz WiFi only, dual-band....
Check Stock

Ceiling Fan Control & Dimmer Wall Switch, 2 in 1 Light and Ceilig Fan Combination Light Switch,Single Pole,No Wi-Fi Capability, Neutral Wire Needed.

  • 【Ceiling Fan Control】: Nexete ceiling fan switch offers 3 fan speeds, simply press the button to “+” to increase fan speed and press it to “-” to decrease the speed. Fan Speed and light dimmer can be individually controlled on a fan and light switch combo. (Notice: Wi-Fi disable, Not use for exhaust fans. Max ceiling fan load of 1A).
  • 【10%-100% Dimming Range】: You can set the desired brightness from 10% -100% to enjoy the appropriate ambience on different occasions when using the ceiling fan dimmer switch. ( Max light load of 100W dimmable LED/CFL or 200W incandescent bulbs.).
  • 【ADVANCED TECHNOLOGY】: Wall control switch and Zero cross detection technology. No time delay, No switch electric arc. Replaces an existing wall switch with added control features for fan speed and light without pull chain .New technology make the ceiling fan wall switch to be more safe and long lifetime..
  • 【EASY INSTALLATION】: Requires neutral wire and separate load wires for fan & light- please confirm that the wiring in your home is compatible before purchasing the smart switch (older homes may not have neutral wires). No ....
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...module kit protective lens can have no fingerprints, it will affect the cutting ability, and the performance of the module decreases..
  • SPECIFIC PARAMETER DETAILS – Fixed focus: 45mm.
  • Power adjustable: supports 5V PWM modulation.
  • Simple control line installation method: Pluggable. Excellent compatibility with DIY machines and other brand laser engraving machines, laser cutting machines, CNC routers, and 3D printer machines. Widely used in Plywood, wood, stone, Mirror stainless steel, black acrylic, plastic, leather, etc..
  • TECHNICAL SUPPORT & AFTER SERVICE – Please choose the 12V or 24V module according to the DC of your machine driver board, or choose the laser module kit if you need a sliding plate. Laser engraver module package includes: 1*12V Laser module.
  • 1*Air nozzle. We offer 12 month’s warranty on our products. If you have any questions, visit Amazon or website and get professional technical support in time..
Check Stock

Minka-Aire F844-DK Light Wave 52\ Ceiling Fan, Distressed Koa with Remote and Additional Wall Control

  • DESIGN: The Minka-Aire Light Wave ceiling fan is a truly unique design that draws inspiration from the ocean's graceful and tubular wave formations..
  • BULB: The Light Wave ceiling fan includes an integrated 16 Watt Dimmable LED Light Module in White Opal Glass.
  • INCLUDED: One RCS213 - Three-speed hand-held remote control, One WCS213 wall Control and One 6-Inch Downrod.
  • MOTOR: Conveniently quiet, 3 speed - reversible motor. Run Summer and Winter to aid in rotating air and cutting down on energy costs..
  • DIMENSIONS: Measures 13.75'' from the ceiling to the lowest point of the fan. This Unique Style Ceiling Fan has a blade sweep diameter of 52'' with variable Blade Pitch.
  • ADDITIONAL: Requires Bond hub BD-1000 (sold separately) to work with Amazon Alexa or Google Home. Optional WCS213 wall control can be purchased separately..
Check Stock

TREATLIFE Smart Ceiling Fan Control and Dimmer Light Switch Neutral Wire Needed 2.4GHz Single Pole Wi-Fi Fan and Light Switch Combo Works with Alexa Google Home and SmartThings Remote Control

  • REQUIREMENT: The smart fan switch does not compatible with fans having built-in remote control system. Not use for exhaust fans and smart bulb. Max ceiling fan load of 1.5A (Offers 4 fan speeds control), max light load of 150W dimmable LED/CFL or 300W incandescent bulbs. 2.4G Wi-Fi only (NOT 5G).
  • single-pole use only (NOT 3-way). Not work with multiple dimmers on a circuit..
  • EASY INSTALLATION: Requires neutral wire and separate load wires for fan & light- please confirm that the wiring in your home is compatible before purchasing the smart switch (older homes may not have neutral wires). No Hub required. No canopy module required. FCC certified. If you encounter any problems or have questions to ask please contact us first..
  • SMART BRIGHTNESS & FAN SPEED CONTROL: The smart light switch can adjust fan speed and dim your lights from anywhere with smartphone using the Smart Life App or Treatlife App. This 2In1 smart fan and light switch combo provides 4 fan speeds with smooth, flicker-free dimming（10%-100%）for increased comfort. Gentle On & Off Lighting for comfortable visual effect..
  • TIME SCHEDULE: Create schedules to automatically turn the light and fan on/off with the preset brightness/speed at specific times.
Check Stock