Reviews Extension For Lathes

Powermatic Lathe Tailstock Swing Away (6294721)

  • FITS POWERMATIC 3520, 3520A, 3520B, AND 2020 LATHES.
  • EASY STORAGE: Swing the lathe tailstock down to store it out of the way..
  • QUICKLY LOCKS TO THE LATHE: With just a few turns of the handle..
  • DOES NOT INTERFERE WITH BED EXTENSION MOUNTED IN LOWER POSITION.
Check Stock

JET 708158 Mobile Base Extension Kit

  • STABILITY: 5/8" ground clearance provides a low center of gravity for excellent stability under load..
  • VERSATILITY: Extension rails let you use a base with machines that have long and narrow footprints (e.g., lathes, table saws)..
  • CAPACITY: Strong, yet lightweight base can hold tools up to 1,200 lbs..
  • MOBILITY: Two locking swivel casters offer easy mobility..
  • TOOL-LESS SET-UP: Quick-snap adjustment allows you to configure the base width and length from 24" x 24" to 34" x 34.
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. ....
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

  • Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
  • Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
  • Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
  • Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..
Check Stock

Jet 725001K ProShop II 115V 52" Rip Cast Wings, White with JET 708158 Mobile Base Extension Kit & JET JMB-UMB Universal Mobile Base (708118) & & &

  • NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily..
  • QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes..
  • CONVENIENT, MAGNETIC PADDLE SWITCH: For the safest operation possible..
  • STABILITY: 5/8" ground clearance provides a low center of gravity for excellent stability under load..
  • VERSATILITY: Extension rails let you use a base with machines that have long and narrow footprints (e.g., lathes, table saws)..
Check Stock

JET JPS-10 52" ProShop Table Saw with Steel Wings (725005K) with JET 708158 Mobile Base Extension Kit & JET JMB-UMB Universal Mobile Base (708118) & & &

  • NEWLY-DESIGNED ARBOR LOCK: Change blades quickly and easily..
  • QUICK-RELEASE RIVING KNIFE Hassle-free riving knife changes..
  • IMPROVED DUST SHROUD AROUND BLADE: Greater dust collection..
  • STABILITY: 5/8" ground clearance provides a low center of gravity for excellent stability under load..
  • VERSATILITY: Extension rails let you use a base with machines that have long and narrow footprints (e.g., lathes, table saws)..
Check Stock

Shark 782 Negative Rake Tool Holder

  • Used for disc and combination brake lathes when cutting rotors.
  • Works with Ammco models 3000, 4000 and 7000 lathes.
Check Stock

Nova 70mm (3\) Dovetail Jaw (for smaller chucks)

  • 0XA, or series 000 size (60% of AXA size).
  • Includes mounting stud and spacer for 8x12, 8x14 lathes.
Check Stock

WEN LA8800 225-Pound Capacity Height Adjustable Steel Lathe Stand

  • Designed to fit the entire WEN Benchtop Wood Lathe series.
  • Sturdy steel design holds lathes up to 225 pounds.
  • Adjustable height goes from 24.5 inches to 34.5 inches with stops every 1.5 inches.
  • Adjustable length goes anywhere from 23.25 to 37.25 inches for compatibility with the majority of benchtop wood lathes.
Check Stock