Reviews Exhaust Fan With Motion Sensor

Sensky SK037 3-12M 360 Degree Ceiling Occupancy Sensor PIR Motion Sensor Switch High Sensitive Motion Sensor Light Switch(110V-240VAC)

  • 【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements..
  • 【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night..
  • 【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, the delay time controls how long the light stays on once the ceiling motion sensor gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time..
  • 【DETECTION RANGE ADJUSTABLE】 - 3-12m adjustable, the sensor switch can be adjusted according to your demand. The ceiling occupancy sensor both fits for small room and large room..
  • 【PIR MOTION SENSOR】 - Working by detecting human movement(or heat source), the motion sensor switch is widely used on LED light, compact fluorescent lamp, incandescent lamp, ceiling light, exhaust fan....
Check Stock

Square D X Series Dual Humidity & PIR Motion Occupancy/Vacancy Sensor Light & Fan Control, 3 Amp Single-Pole/1-way, Matte White

  • Combination moisture and motion sensor to automatically control bathroom exhaust fan and light.
  • passive infrared (PIR) motion range up to 600 square feet and programable humidity level.
  • Relative humidity level can be set between 30 – 85%.
  • adjust timing for fans and lights in increments of 10, 20, or 30 minutes.
  • Push button provides manual ON/OFF light switching at any time between occupancy detection (lights ON/OFF are fully controlled) and vacancy detection.
  • Two independent push buttons provide manual control of the fan or light and two configurable working parameters and one configurable light operation mode.
  • Supports 400W LED or 500W incandescent bulbs, single-pole/1-way wiring, and is CA title 24 and RoHS compliant.
Check Stock

BOSCH SECURITY VIDEO DS936 PIR Ceiling Mount Motion Detector (NA)

  • WIDE APPLICATIONS：360° embedded automatic infrared PIR motion sensor switches are widely used in dynamic lighting, corridors, bathrooms, basements, warehouses, garages and other places, automatic exhaust ventilation fans and other electrical appliances..
  • PIR MOTION SENSOR：The LED light bar switch can detect human movement by detecting the light emitted by the human body. 360° infrared recessed pir ceiling motion sensor detector light switch has a built-in temperature compensation chip to reduce the temperature shock sensing distance..
  • INTELLIGENT BRIGHTNESS SENSOR：The motion sensor switch adopts photosensitive control, which will not turn on the light in the daytime or under strong light conditions. You can also choose to turn on the light in any light environment..
  • 360 DEGREES CONE ANGLE：The 360-degree cone angle detection range of the PIR motion sensor switch: high sensitivity and stability, effective energy saving, and improved efficiency. Installation method: wall-mounted, suction-point installation, and ceiling-mounted installation..
  • TIME DELAY：The intelligent induction of the IR sensor light switch, it will automatically turn off after a period of delay after the person leaves. After it is turned on within the delay time, if there is no....
Check Stock

14” RV Roof Vent Fan with Remote, CAPHONT 12V 10-Speed RV Ceiling Fan Fits for All RV Roof Thickness, with Infrared Sensor, Rain Sensor, Temp Sensor, Instructions Included

  • INTELLIGENT DESIGN: Our RV fan with temp sensor and rain sensor. If the rain sensor detects rain, it will close the lid automatically. And the fan will work normally and maintain horizontal ventilation. It is also thoughtfully equipped with a visual remote control that can display the ventilation of the exhaust fan. The electric lid lift cover allows you to reach up and open the vent no more stepping on a stool, through the remote control you can adjust the RV roof vent fan at any time..
  • DURABILITY & REMOVABLE SCREEN: Casing made of high-class plastic material. When the vent is closed, the lid is tightly sealed to ensure that it will not leak in rainy days. All materials have good weather resistance. It is also features a removable screen to prevent uninvited guests such as flies, mosquitoes, ticks... from entering the car. Compared with the traditional screen, it does not require screws and only controlled by rotating. It is easier to install, disassemble and clean..
  • WHICH RVS ARE SUITABLE FOR? Our RV exhaust fan frame is extra high, can be cut according to the thickness of your RV roof. This means that no matter what your class of motorhome, such as class A/B/C motorhome/travel trailer/fifth wheel trailer/folding camper/truck camper. Our ....
Check Stock

Leviton IPHS5-1LW 3A Single Pole White - 3 Pack

  • NEW GENERATION: We update a critical opition for minimum run time, you can setting for how long the fan runs in auto/manual mode, default time is 1....
  • DEHUMIDIFICATION FUNCTION: Our Ortis humidity sensor fan switch uses a microprocessor combined with the advanced digital sensing technology. To detect....
  • AUTO/MANUAL MODE: When set to automatic mode, it can automatically detects the humidity in the room and turns on the bathroom fans, it will....
  • EASY TO SEE: Our in-wall humidity sensor & fan control uses LCD screen, displays real-time humidity value. It is easy for you to view and manage the....
  • NO DISTURB AT NIGHT: Are you still worried about that the loud exhaust fans at night will cause you to have trouble sleeping? Our wall humidity sensor....
Check Stock

Leviton IPHS5-1LW Humidity Sensor and Fan Control, Single Pole, White

  • ... the cycle hourly (eg. 20 minutes ON/40 minutes OFF each hour).
  • Replaces a single pole switch for control of ventilation fan or a fan/light combination, Fits in a standard wall box and requires a neutral for operation, The device’s built-in humidistat control meets CALGREEN requirements for Indoor Air Quality and Exhaust, Five-Year Limited warranty.
  • Automatically detects excess humidity in a room and activates the ventilation fan to lessen condensation which helps reduce mold and mildew.
  • Sensor uses microprocessor and digital sensing technology to continuously monitor and manage humidity levels in a room.
  • Replaces a single pole switch for control of ventilation fan or a fan/light combination.
  • 600W Incandescent, 150W LED/CFL, 400VA Magnetic Low Voltage/Flourescent, 1/6th HP (3-Amp) fan.
  • Fits in a standard wall box and requires a neutral for operation.
Check Stock

Homewerks 7145-80V-HS Dual Speed Bathroom Exhaust Fan with Integrated Dimmable LED and Automating Humidity Sensor, 1.0-1.5 Sones 80-110 CFM, Smart Moisture White

  • OUTSTANDING PERFORMANCE: This Homewerks Dual Speed bath fan with LED Light has a Humidity Sensor that Automatically turns on and adjusts Fan Speed based on humidity levels. This exhaust fan on low setting (60% Humidity) operates at a quiet 1 Sones at 80 CFM which means it is whisper quiet during operation. On High setting (80% Humidity) it is 1.5 sones (equivalent to rustling leaves) and 110 CFM..
  • BATH FANS HELPS REMOVE HARSH ODOR: When cleaning the bathroom or toilet, harsh chemicals are used and they can leave an obnoxious odor behind. Homewerk’s bathroom fans can help remove this odor with its powerful ventilation..
  • DESIGN AND FEATURES: Designed to be corrosion resistant with its galvanized steel construction. The Dual Speed Automatic Humidity Sensor will turn the bath fan on Low setting when Humidity is at 60% and High at 80% Humidity. When less than 60% sensors will turn fan off. Light and Fan can be controlled manually with included LED Wall Switch.
  • EASY INSTALLATION: This exhaust bath fan is easy to install with its no-cut design and ceiling mount ventilation. Dual Color Night Light.
  • INSTALLATION REQUIREMENTS: Ceiling Opening (L) 9-1/4 in x (W) 9-1/4 x (H) 8-1/4 in. Housing Dimensions: (L) 9 in x (W) 9 in x (H) 7-11/16 in. Duct Diameter 4 Inches....
Check Stock

Powerful Industrial Exhaust Fan 36 Inch

  • INDUSTRIAL EXHAUST FAN: This MaxxAir 36" Industrial Exhaust Fan is a powerful fan that can be used in garages, barns, greenhouses, and a variety of....
  • THERMALLY PROTECTED FAN: The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy....
  • EXHAUST FAN WITH SHUTTER: The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. It....
  • HEAVY DUTY EXHAUST FAN: The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges....
  • EXHAUST FAN WARRANTY: This heavy duty exhaust fan has a 1 year limited warranty. The shutters open and close automatically. Fans do not come with....
Check Stock

ECOELER Motion Sensor Light Switch, Occupancy & Vacancy Model Motion Activated Wall Switch, Neutral Wire Required, Single Pole for Indoor, Wall Plate Included, UL Listed FCC Approval

  • ...h requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Allowing the lights to turn on from multiple switch locations in the room. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician..
  • ✅VERSATILE SETTINGS: The motion detector light switch features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing..
  • ✅OCC / VAC OPTION: The homekit light switch with Occupancy mode (Auto ON / OFF) and Vacancy mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights and fan accidentally left on all day..
  • ✅CERTIFICATION: Smart motion sensor switch have UL Certified, FCC Listed and California Title 24 Compliant. Multiple certifications, Let the customers be assured..
  • ✅100% REFUND GUARANTEE: Welcome order ECOELER Se....
Check Stock

Hike Crew 14” RV Roof Vent Fan with Remote | 12V 6-Speed Motorhome Fan with Auto Temperature, Intake & Exhaust, Rain Sensor & Electric Open/Close | Includes Screws & Garnish | Smoked Lid

  • KEEP COOL IN YOUR COMFORTABLE RV | Complete Ventilation System Delivers Powerful Cooling, Reliable Exhaust & Effective Moisture Control for Any RV, Camper, Motorhome or Similar Recreational Vehicle | Universal Design Requires 14” x 14” Sunroof Opening & Electric Hookup [Wiring & 12V Power Supply Included].
  • CONVENIENT REMOTE OR MANUAL OPERATION | No More Reaching to Adjust! | Set Arrives with a Remote Control for Changing Fan Speed, Automating Exhaust, Setting Temperature, & Opening/Closing the Lid from Afar | Also Includes Touch-Button Dashboard for Manually Changing Settings When Remote is Unavailable.
  • 6-SPEED FAN WITH REVERSIBLE AIRFLOW | 10-Blade Skylight Fan Provides Perfect Air Circulation for All-Season Comfort & Relief | In/Out Exhaust Capability Allows You to Draw in & Circulate Fresh Air from Outside or Push Stale Air Outdoors, Lowering RV Temperature & Eliminating Foul Odors from Food, Smoke, Waste, Pets & More.
  • AUTOMATIC TEMPERATURE & RAIN DETECTION | Keep Your Environment Fresh, Cool & Clean, Even When Windows & Doors Must Remain Shut | Choose a Temperature [79°F-122°F] & Fan Sunroof Automatically Opens/Runs to Maintain Setting | Built-In Rain Sensor Automatically Closes Lid During Harsh Weather for Added Protection.
Check Stock