Reviews Ethernet Fibre Module - BestBuyersPro.com

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.

Reliable and suitable for a wide range of uses..
High conversion efficiency, simple regulating operation..
Modbus TCP Ethernet Remote IO Module (8DI+8DO+8AI+RJ45+RS485).
The M160T Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module,.
It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, monitoring system, automatically measurement and control system..

MikroTik FiberBox Outdoor Switch with 5-Ports SFP - Includes 1 S-RJ01 Copper Module (CRS105-5S-FB).
The Fiberbox is ideal for locations where distance is restricting the use of regular ethernet cables..
The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers..
The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box..
If not needed, remove it to have access to all five SFP ports for using with 1.25 Gbit fiber modules..

This product provides a convenient and cost-effective way to power equipment..
This module allows you to apply DC voltage to specific pairs of Ethernet cables so that devices connected to the network can use it as a power source..
This module is ideal for any PoE application with limited space, such as IP cameras, biometrics, readers, network audio, etc..
For Raspberry Pi Ethernet POE fan power supply module, supports for Raspberry Pi 4B/3B+, provides clean and reliable power supply..
With small size, easy to carry and store, convenient to use and with good performance..

【Raspberry Pi 4 Model B Starter Kit】 Motherboard, New SOC Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit at 1.5GHz. Capable of supporting HEVC 4K streams at 60 fps and managing 2 screens in 4K.
【Fastest Raspbery Pi 4 Model B Starter Kit】Dual band 802.11b/g/n/ac WiFi (2.4/5.0 GHz) and Bluetooth 5.0 module. Transfers via 2 USB 3.0 & 2 USB 2.0 ports is faster up to 10 times, 4Gb/s or 500 MB/s. Faster Gigabit Ethernet & Power-over-Ethernet support.
【64GB Class 10 SanDisk Micro SD Card】Use brand new sd card and have no noobs in it you need install system yourself.
【4B Module Cooling Kit】Pi cooling fan with 4 pcs heatsink will make the pi module cooling fast.
【Customized Case】will protect the pi module for well and can also work with 3.5 screen.
【RAM Size Can be Chosen】You can choose 2G or 4G or 8G for your project.

Power supply mode:3.3V external power supply, current should be more than 200mA.
USR-ES1 is the Ethernet module of a SPI interface, interface is TTL level of 3.3V, power supply voltage of +3.3V, please ensure that the current is not less than 200mA, voltage is continuous and stable +3.3V..
W5500 SPI to LAN Ethernet Network Module TCP IP STM32 Interface 3.3V 5V for Arduino WIZ820io RC5.
Control interface:The TTL level, 3.3V SPI interface.

Nonstandard baudrates supported with high precision.
Port buffers for storing serial data when the Ethernet is offline.
Supports IPv6 / Ethernet redundancy (STP/RSTP/Turbo Ring) with network module.
Modular design for scalability / DES/3DES/AES for highly secure data transmissions.

ENHANCED WIFI OR DIRECT ETHERNET CONNECTION: Connect your sensors wirelessly over WiFi or ethernet to the world's largest personal weather station network.
EASY SET UP: The Weather Hub IP module connects directly to your router and is configured through any web browser..
SMART HOME READY: Set up alerts, access your data remotely, and program your home based on weather conditions using IFTTT, Google Home, Alexa, and more.
JOIN THE COMMUNITY: Connect to Ambient Weather Network to customize your dashboard tiles, share hyperlocal weather conditions via social feeds and create your own forecasts (coming soon)..
Weather stations & sensors sold separately.

This Power over Ethernet module allows you to power up to 4 devices remotely over ethernet wiring up to 328 ft (100 meters) away.
Add PoE ability to any Ethernet switch or router. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable..
10/100M operation, Standard Ethernet uses 2 of the 4 pairs, passive POE uses unused pins 4/5 for plus power, and 7/8 for ground..
For Many popular devices like IP Cameras, IP Phones, WiFi Access Points and more.
48V 65W high quality UL listed power supply included, power for IEEE802.3af device..