Reviews Electronics Part Mold

LET'S RESIN Silicone Mold Making Kit 63.48oz/3.968lbs,Non-Toxic Mold Making Silicone Rubber, Platinum Silicone Mold Maker,Clear Liquid Molding Silicone Kit for Resin Molds, Silicone Molds Making

  • PREMIUM MOLD MAKING SILICONE MATERIAL: Our translucent clear liquid silicone are made by safe silicone material, non-toxic and no odor, very flexible, soft and clear. You could color the molding silicone with mica powder to achieve new colors..
  • EASY MIXING & POURING: LET'S RESIN silicone mold making kit are 2-part silicone including part A and part B.
  • the mix ratio is 1:1 by weight (digital scale is necessary). Pour the Part A and Part B together, then slowly stir the silicone rubber about for 5 minutes, make sure to stir the mixture thoroughly for better results. The working time of liquid silicone rubber is 40~50 minutes and the complete cure time is 8~15 hours at room temperature, it varies on your mold size and thickness..
  • NO BUBBLES: The bubbles of will automatically disappear within about 2 hours, no vacuum degassing is necessary. IMPORTANT TIPS: To reduce the micro bubbles, you can slow down the curing speed. You can put it in freezer for about 1 hour while curing, then take it out and let it cure in the room temperature. Do not warm up the silicone before use, as this will cause more bubbles..
  • GREAT FOR BEGINNER: If you're new to the mold making, our mold making kit is a perfect choice for you to try! No special skills or tools are needed. You c....
Check Stock

LG Electronics 6615JB2002R Refrigerator Thermistor

  • Refrigerator Thermistor Temperature Sensor.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics 3550EL1006B Dryer Lint Filter Guide and Grille

  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics 6201EC1006U Washing Machine Noise Filter Assembly

  • For use with the following LG Electronics models: F1201FDP, F1201FDP1, WM2301HR, WM2301HW.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics AGM73069204 Gas Range Conversion Kit, Natural Gas to LP

  • For use with the following LG Electronics models.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics 5231EL1001C Dryer Lint Filter Assembly

  • For use with the following LG Electronics models: DLGX5102V, DLGX5102W, RN1317AS, RV1317AS, RN1317TS, RV1317TS, DLEX5101V, DLEX5101W, DLE4801W.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics 4925ER1015B Washer Dispenser Assembly, White

  • This is an authorized aftermarket product.
  • Fits with various 4925ER1015B brand models.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics 0CZZJB2014L Electric Appliance Film

  • This item replaces part number 0CZZJB2012J.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

LG Electronics 4434ER0003C Washing Machine Rear Spider Drum Support

  • Washing machine rear spider drum support.
  • For use with the following LG Electronics models: WM2016CW, WD10580BD.
  • Refer to your manual to ensure ordering the correct, compatible part.
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • 【MIX RATIO 1A:1B BY VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO ....
Check Stock