Reviews Electronics Desoldering Irons

YIHUA 929D-V Electric Desoldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering

  • This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice..
  • This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering..
  • Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely..
  • This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferri....
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • ...ucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more..
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • 【6-in-1 Solder Removal Tool】: 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
Check Stock

Soldering Iron Auxiliary Kit, Desoldering Pump, No-Clean Soldering Core (Width2.5mm / 0.1\

  • The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
  • High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
  • Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
  • Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
  • Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..
Check Stock

EVERMARKET TM Desoldering Wick solder braid with 2.5mm Width 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool - Blue

  • High quality desoldering braid with unique no clean flux and gemetrically- precise weave.
  • Pure oxygen free copper wire with 0.1"W x 5'L, weight 0.4oz.
  • Excellent thermal transfer for faster, safer desoldering using lower temperature irons.
  • High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2" length x 3/4" diameter.
  • Special Design: Right or Left handed design allows easy one-handed use.
Check Stock

Yoodelife Desoldering Wick, solder braid with 2.5mm Width, 1.5m Length and Solder Sucker Desoldering Vacuum Pump Solder Removal Tool Blue, Set of 2

  • High quality desoldering braid with unique no clean flux and gemetrically- precise weave.
  • Pure oxygen free copper wire with 0.1"W x 5'L, weight 0.4oz.
  • Excellent thermal transfer for faster, safer desoldering using lower temperature irons.
  • High Quality Solder Sucker & Light Material: Super high pressure vacuum with aluminum body frame with right size: 7-1/2" length x 3/4" diameter.
  • Special Design: Right or Left handed design allows easy one-handed use.
Check Stock

Sainwora 10 Pcs Soldering Accessories Kit Includes Desoldering Pump,Pocket Pack Solder and Repair Tools Solder Sucker Tool Kits

  • ★【High Quality】Super high pressure vacuum with aluminum body frame，can remove solder from a printed circuit board effectively.
  • ★【Excellent Function】Excellent thermal transfer for faster, safer desoldering using lower temperature irons.durable and not easy to age.
  • ★【Powerful Suction】Made of high temperature resistant nylon material.Heated up the solder pushed the button,all solder sucked up,super easy to....
  • ★【Low Residue】Solder sucker desoldering pump helps to clean the solder and avoid short circuit, Anti-scalding and high temperature resistant tin....
  • ★【Special Design】Right or Left handed design allows easy one-handed use.Easy to disassemble and clean, easy to disassemble by slight rotation,....
Check Stock

Weller ETS TETS Long Conical Replacement Tip for Soldering Irons 1/64” for Small Electronics Soldering Stations Repairs Toys Circuit Boards Motherboards - 2 Pack

  • A Brand You Can Trust - Weller is the leading manufacturer of soldering irons, stations and soldering tips. These tips are the highest quality....
  • Compatible With a Variety of Soldering Irons - These tips are perfect for using with the PES51, WES51 and WESD51 soldering irons/stations.
  • Perfect for Small Electronics - Perfect for use with small electronics, micro electronics, circuit boards, toys, motherboards, repairs.
  • Specs - Long conical soldering tip, 0.015” tip diameter, contains 2 soldering tips.
Check Stock

Lesnow Solder Sucker Desoldering Pump,Electric Soldering Iron Auxiliary Tool Manual Desoldering Suction Pump,Vacuum Pump Solder Removal Tool (2 pcs Desoldering Pumps)

  • 1. Wide range of uses：Desoldering pump is widely used in the electronics and electrical industries, suitable for precision small devices, integrated circuit pins, home appliance repairs, digital repairs, etc., efficient and portable to remove waste tin residue..
  • 2. Ergonomic design: Desolder pump adopts aluminum alloy shell, the operation is not slippery, the grip is comfortable, and the use is convenient..
  • 3. High-quality suction nozzle: Good solvent resistance, lightweight design, easy to carry, suitable for long-term use, and improve work efficiency..
  • 4. Strong suction power: Solder sucker desoldering pump adopts stainless steel push rod, internal spring adopts back pull design, instant suction power is strong..
  • 5. Press lightly and quickly rebound: Desoldering suction pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block..
Check Stock