Reviews Desoldering Wicks

CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length

  • ☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks.
  • ☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick..
  • ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
  • ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock

TOWOT Solder Wick Braid with Flux No-Clean Electronic Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10 L 5

  • Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
  • And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
  • Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Check Stock

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 9.8'

  • Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder..
  • Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering..
  • Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work.
  • And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work..
  • Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it..
  • Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!.
Check Stock

Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)

  • What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
  • No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
  • Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
  • Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
  • Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Check Stock

MOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker & Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool

  • ( 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • ( One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ( Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • ( ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat....
Check Stock

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock

MIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length

  • ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random..
  • ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft..
  • ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder..
  • ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
  • ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..
Check Stock

Solder Wick Braid Copper Wire with flux 10 ft 3M Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board 1pcs

  • ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux..
  • ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs..
  • ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process..
  • ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components..
  • ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..
Check Stock

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

  • The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs.
  • If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use..
  • If for any reason you are not 100% satisfied with lesnow solder cores, we sup....
Check Stock

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 7-in-1 Solder Set: 6 pcs different copper solder braid is made of copper and rosin geometrically accurate braiding when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (2.0mm,1.5m.
  • 3.0mm,1.5m), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 7-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock