Reviews Edgewise Bracket

3 Piece Equalizer Rearview Mirror Adhesive Installer Tool & Kit, Spring Latch Rearview Mirror Removal Tool JMR357

• Spring Latch Rearview Mirror Removal Tool The JMR357 allows you to slide the locking mirror bracket off a mirror button. Spring latch rearview mirrors have a small spring inside the bracket that is pushed down as you slide the mirror over the mirror button which then springs back into place, locking the mirror in place. Because this spring is hidden, it is difficult to release..
• Rearview Mirror Installer Designed for re-installation of spring-loaded mirrors. To Use: Just set the upper jaw against the rearview mirror, put the nylon block against the rearview mirror mounting bracket and squeeze the handles. The mirror is forced quickly and easily onto the mounting bracket with little or no chance of breaking the glass..
• Equalizer Rearview Mirror Adhesive Kit contains enough material to adhere 200 mirror buttons. Unlike most brands, ours has a brush-on primer instead of spray. The adhesive has a gel-like consistency to keep it from running down the windshield..
• To use it, clean the glass and mirror bracket thoroughly. Brush the primer on the glass where the bracket will be installed and then brush the primer on the mirror....

Chamberlain 41A5250 Garage Door Opener Drive Belt Genuine Original Equipment Manufacturer (OEM) Part

• GARAGE DOOR OPENER BRACKET - Ideal garage door parts included in this bundle: 1 garage door replacement bracket, 1 clevis pin, 1 cotter pin and 3 self tapping sheet metal screws/fasteners. Installation instructions are included..
• GENIE GARAGE DOOR PARTS - This garage door parts bracket is used to attach the curved door arm, straight door arm and carriage assembly to the garage door. This bracket allows the operator to open and close the garage door..
• GARAGE DOOR BRACKET REPLACEMENT - Garage door reinforcement kit - fits most brands genie, liftmaster, sears, craftsman. Same as 19792A04, 19782, 19792A, 19792A04.S, 19792B. Universal door bracket to connect door to door arm..
• "GARAGE DOORS PARTS - Recommended to attach the bracket to the sectional door and install a piece of corner metal behind the style to which the garage door mounting bracket is attached to reinforce the style to which the opener will be attached. ".
• GARAGE DOOR BRACE - This universal garage reinforcement bracket is easy to install, attaches to your garage door for use with any model of garage door opener. Check your garage door owner's manual for installation recommendations..

Curtain Rod Bracket Heavy Duty Curtain Rod Holders Single Decorative Rod Hooks Hanger Fit for 1 to 1.2 Inch Drapes Rod Black Set of 4

• HEAVY DUTY CURTAIN ROD BRACKET - Black curtain bracket is made of high-quality aluminium alloy, thick and solid structure.
• Compared with plastic curtain rod holders, curtain rod bracket nickel is more durable and sturdy, no bent and no deformation, ensuring long service time than other rod brackets..
• CURTAIN ROD BRACKET SET - Package include set of 4 rod holders, coming with 8 screws and 8 anchors for convenient installation. Curtain bracket hooks designed with sleek edge, no burrs.
• fits for holding heavy or small rods as curtain rod brackets frame..
• SPECIFICATIONS FOR CURTAIN ROD - ⚠️⚠️⚠️Curtain rod holders fits for 1 to 1.2 inch diameter rods. Please measure rod size before purchasing.⚠️⚠️⚠️ Single curtain rod bracket, features with removable plastic buckle, can fix the rod and protect drapery rod bracket..
• WIDER APPLICATION: Unlike adhesive curtain rod holder which can easily fall off after few days, curtain rods brackets with screws have wider usage:perfect for shower curtain rod holder,outside curtain rod bracket, also can as decorative curtain rod bracket..
• STRONG BEARING CAPACITY - Black curtain rod holder, each can hold up to 12 lbs, can be better as drapery rod bracket. Concise and elegant appearance make great home decor....

Anndason Sturdy Curtain Rod Brackets Rod Holders Curtain Rod Holder Curtain Rod Bracket for 1 Inch,1 1/8 Inch and 1 1/4 Inch Rod, Silver Color, (Set of 4)

• HEAVY DUTY CURTAIN ROD BRACKET - Black curtain bracket is made of high-quality aluminium alloy, thick and solid structure.
• Compared with plastic curtain rod holders, curtain rod bracket nickel is more durable and sturdy, no bent and no deformation, ensuring long service time than other rod brackets..
• CURTAIN ROD BRACKET SET - Package include set of 4 rod holders, coming with 8 screws and 8 anchors for convenient installation. Curtain bracket hooks designed with sleek edge, no burrs.
• fits for holding heavy or small rods as curtain rod brackets frame..
• SPECIFICATIONS FOR CURTAIN ROD - Curtain rod holders fits for 1 to 1.2 inch diameter rods. Please measure rod size before purchasing. Single curtain rod bracket, features with removable plastic buckle, can fix the rod and protect drapery rod bracket..
• WIDER APPLICATION: Unlike adhesive curtain rod holder which can easily fall off after few days, curtain rods brackets with screws have wider usage:perfect for shower curtain rod holder,outside curtain rod bracket, also can as decorative curtain rod bracket..
• STRONG BEARING CAPACITY - Black curtain rod holder, each can hold up to 12 lbs, can be better as drapery rod bracket. Concise and elegant appearance make great home decoration. Any questions for heavy duty ....

Culligan UB-1 Mounting Bracket with Screws

• Mounting bracket for Culligan Whole House Sediment Water Filter HF-360 (1653-3325).
• The Culligan UB-1 single housing bracket is a “U” shaped mounting bracket for 3/4″ inlet/outlet standard whole house housings..
• The UB-1 mounts standard whole house water filter housings and helps support the weight of the water filter..
• Screws are included with the UB-1 mounting bracket for securing the water filter housing to the wall. The screws are No.10 1-1/2″ pan head screws..

Neewer Universal E-Type and S-Type Bracket Holder with Bowens Mount for Speedlite Flash Snoot Softbox Beauty Dish Reflector Umbrella Photo Studio

• KIT INCLUDES: (1)S-Type Bracket Holder with Bowens Mount, (1)E-Type Bracket Holder, Suitable for Speedlite Flash Snoot Softbox Beauty Dish Reflector....
• S-TYPE SPEEDLITE BRACKET: Great combination of L-type and T-type speedlite mounts and improved from them.
• Smaller size, lighter weight, less space....
• BOWEN MOUNT DESIGN AND FURTHER SUPPORT: Bowens mount design facilitates most studio flash accessories, such as softboxes, reflectors, beauty dishes....
• E-TYPE SPEEDLITE BRACKET: The bracket has screw fittings for the flash mount, umbrella and tripod mount.
• This bracket is an inexpensive way of....
• PRACTICAL DESIGN: S-Type Bracket Holder Firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite, E-Type Bracket....

Kidde 366242 Vehicle Brackets, Metal, Running Board Bracket For 10 Lb Proline Fire Extinguishers Units

WEKIS 12 Inch Heavy Duty Floating Shelf Bracket, Wall Mounting Industrial Black Shelf Brackets, 1/5 Inch Thick Iron Metal Brackets for Shelves 6 Packs

• SHELF BRACKET MEASUREMENT - WEKIS 12 inch floating shelf bracket fits size 11.25” x 6” x 1.5”. The shelf bracket is good for wall mounted home decor. (The Wood Board Is Not Included).
• HEAVY DUTY BIG SHELF BRACKET - WEKIS shelf bracket is high quality metal open shelving bracket. The bracket is extra thick 5mm each,powder coated black finishing sturdy iron shelves bracket. The brackets are durable enough to carry 150lb/pair with our upgraded quality screws..
• SHELVE BRACKETS HARDWARE INCLUDED - 6 packs 12 inch multi-purpose J shape floating shelf brackets. Heavy duty screws and drywall anchors needed to install your new shelf brackets are included. We will put more extra accessories in the box for installation. (Not Include Wood Board).
• PERFECT FOR HOME DECORATE DIY - This floating shelf brackets is J shape decorative shelf for home decoration as book shelf bracket,kitchen wall storage shelf brackets,living room wall mounted shelving brackets,window box brackets,garden floating shelf brackets,garage storage shelf brackets..
• AFTER SALE SERVICE - We have warehouse and customer service office located in US. We will provide free replacement service if you need help. We promised that we will do our best to solve the problems for you within the shortest po....

SSD Bracket 2.5 to 3.5 Adapter, FXAVA SSD Mounting Bracke SSD Bracket 2.5 to 3.5 Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD 2Pack

• 2.5" To 3.5" - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
• SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case. 4 screw holes are designed on the SSD Bracket Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
• Easy to install 2.5" to 3.5" mounting adapter bracket. Suitable for HDD/SSD.
• Metal Material- Our ssd mounting bracket is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
• Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw.

50' Z-bar Hanger Mirror And Picture Hanging System,hangm

• zbar,ezbar,z hanger,mirror hanger,ez bar hanger,art hanger,heavy hanger,z bracket,art bracket,z bar,ez bar hanger,bracket,6 feet zbar,hanger for heavy item,mirrors hangers bracket,mirror hangers z,zbar bracket mirror hanger,hanger+,zbar+,z bar+,z-bar,hangman,cleat hanger,panel hanger,art hanger,heavy duty hanger,z clip,french cleat hanger.