Reviews Bracket Hardware

How To Build Monkey Bars (On The Cheap)

  • The newest swing set bracket in the easy 1-2-3 A-frame bracket series features a 90 degree angle that allows you to extend any A-frame play set!.
  • Heavy-duty 90 degree swing set bracket features a solid, one-piece design that is open on both ends and Constructed with heavy-duty steel with welded seems for the strongest and Safest construction.
  • Swing set brackets are finished in a power-coated Green color and Eastern Jungle Gym signature yellow tag to ensure 100% Authenticity and our Warranty.
  • this listing is for one bracket with hardware.
  • Mounting hardware is included (16 5/16" x 3" zinc-coated steel lag bolts and 16 washers).
Check Stock

Grace Alley Flag Pole Bracket: 2-Position Flag Pole Mounting Bracket with Hardware (Black)

  • HEAVY DUTY BRACKET: This flag pole mounting bracket is made of premium aluminum alloy and well painted in black. It is wind resistant and forever rust free..
  • TWO POSITIONS: The flag pole can be adjusted to a 45 degree or 90 degree angle..
  • MULTI-USE: This jet black bracket can be mounted anywhere. It can be installed on walls, porches, posts, your roof or even your truck or boat..
  • FITS ALL ONE INCH POLES: The inner diameter is 1 inch and will fit any flag pole that is 1 inch or less..
  • HARDWARE INCLUDED: Installation hardware and tightening tool are included. You'll have the bracket installed in minutes..
Check Stock

Nilight Windshield Frame Mounting Bracket for 52” LED Light Bar and Pod Light on Wrangler JK 2007-2017, 2 Years Warranty

  • Fitment Type: Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52” light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust..
  • Upgrading reflector cup: the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination.
  • SIDE MOUNTING BRACKET: The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.
  • High performance: IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan.
  • Simple Installation: Just peel the foam tap, stick them to the bracket, mount the bracket to the windshield frame with vehicles original factory bolts, and then use the mounting hardware comes with the light bar, to install the light bar on the bracket. (Note: If mounting hardware size from the light bar are not same as mounting holes size on bracket, you can use washers to make them fit).
Check Stock

ZXFOOG Rubber Trailer License Plate Bracket-Trailer/Truck License Plate Light Bracket and License Plate Frame Carbon Fiber ,Universal Front Bracket for Boat Trailer with Stainless Steel Plate Screws

  • 【Heavy Rubber Trailer Bracket】: All the hardware included in the kit is shown in the first picture. If the package you receive is missing the relevant hardware, please feel free to contact us for a free replacement.Rubber Trailer License Plate Bracket designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, Prevents loss of trailer/truck license plate. Let the license plate bracket with light last longer.
  • 【Durable Trailer License Plate Bracket】: Black multiply fabric reinforced neoprene rubber license plate bracket for boat trailer,Flexible, durable, corrosion proof, tear proof, fatigue proof, cold temperatures, good UV resistance and long lasting,Replaces flimsy plastic, rigid steel and aluminum holders.
  • 【Carbon Fiber License Plate Frame】: The perfect Match Plate Frame Carbon Fiber (thick plastic license plate frame), matched with 4 carbon fiber plate license plate screws, makes your Trailer / Truck back or front trailer license plate bracket more beautiful.
  • 【Trailer Bracket Easy Installation】: 32PCS stainless steel trailer license plate bracket screws, no need to be purchased by dealers, Rubber Trailer License Plate Bracket can easily mounts to 2" hole pattern on lamp assembly, Standard size for almo....
Check Stock

Front License Plate Mounting Kit- Universal License Plate Bracket & Black Aluminum Car Tag Frame for 2 Drill Hole Front Bumper, Adapter Holder with Anti-Theft Screws Bolts Caps Covers, Fastener Nuts

  • ...hape of the vehicle to drill again, and no need to purchase a license plate adjuster of a special vehicle model. Our universal bracket is suitable for all vehicles with contoured bumpers, or as a spacer recessed into the plate area at the rear of the vehicle.
  • HEAVY DUTY LICENSE PLATE FRAME- Front license plate mount hardware kit- 6 x 12 inch, suitable for standard novelty US or Canadian plate mount. Durable and long lasting! 4-hole black aluminum license plate frame, slim edges, will not cover the license plate Registration sticker, legal street. Heavy-duty ABS plastic bracket and Lightweight Aluminum alloy frame, anti-corrosion and anti-rust, black powder coating on the surface, with black license plate screw cap, make your license plate cool.
  • EASY TO INSTALL- All the front license plate mounting hardware is included- plastic license plate bracket, license plate metal frame, stainless steel license plate screws, inserts nuts, black screw cap covers. M6*20mm or M5*16mm screws to fasten the bracket On the bumper, M6*12mm anti-theft license plate bolts fix the car tag and frame on the bracket. No additional hardware is required to install in a flash, is the best choice for front license plate mount.
  • RUST-PROOF. RATTLE-PROOF. WEATHER-PROOF- The license pla....
Check Stock

Over The Door Board Mount Chrome

  • Powder painted steel hooks hold either T-leg or Dual-leg ironing boards..
  • 6inch long Bracket mounts holder securely without Hardware.
  • Fits door upto 1.75 inches thick.No Hardware required. Sturdy Steel Looks.
  • Use chrome top bracket to hang iron. Easy Hang and Store Assembly.
  • Keeps iron secure against door to save room.
Check Stock

WinisKi 20ft Heavy Duty Residential Sectional Flag Pole Kit Black Flagpole, Outdoor Inground Thicken Adjustable Height Aluminum Pole, Golden&Silver Balls Topper, 3x5 USA Flag, Outside Commercial

  • ...cepts any Evergreen flag pole for House flags or Estate flags. If using a non-Evergreen flag pole, please ensure the pole’s diameter is approximately 1” for a proper fit. Flag and pole both sold separately and not included in purchase. Click on our storefront link to shop our selection of coordinating flag hardware and decorative flags..
  • EASY TO INSTALL: Hardware included. Light assembly required - mounting screws are included. Installation is completed within minutes. Ensure you are mounting the bracket to a solid surface such as wood, siding, or brick with the correct pre-drilled holes or anchors required. Common mounting locations are walls, porches, posts, and trees. The bracket has a hand-tightening screw on the side to make sure the pole is safely secured to the bracket..
  • MADE TO LAST: Heavy duty construction and weather-resistant finish for long-lasting use. Designed to hold up to all weather elements and rust free..
  • EVERGREEN FLAG: Evergreen Flag was founded over 25 years ago, and the beauty and quality of our products immediately set us apart from the competition. Our brand delivers a great balance of both classic and trendy products at an affordable price. Click on our storefront link to shop our selection of seasonal flags, flag hard....
Check Stock

skysen 8FT Low Ceiling Heavy Duty Sliding Barn Door Hardware Double Track Bypass Double Door Kit Black(Bypass I Shape-2)

  • [DOUBLE TRACK BYPASS BARN DOOR HARDWARE KIT] Condition: New.
  • Material:Carbon Steel(High Standard Q235).
  • Surface: High Quality Black Powder Coated(anti-rust).
  • [UPGRADE U SHAPE BYPASS BRACKET] More Flexible when Installation with new upgarde bracket for bypass track, Some Customer were not have enough space between the ceiling and Doors Due to the long bracket .But now it will not be a problem ,we have upgrade the bypass system and make it can fit more rooms(Less space occupied between ceiling to door) ..
  • [EASY TO INSTALL] Professional Step by Step Instruction Included-Our Instruction is listing every step for installation, you can do it step by step, It is very easy when you install the bypass barn door hardware..
  • [PACKAGE INCLUDED] 4*4FT Flat Track ,4*Roller , 4*Anti-jump Pad ,2*Floor Guide ,4*Door Stopper ,6* Leg Screws ,6*WallSpacer ,6*Bypass Bracket(with 6 pcs wall spacer for bypass track) Incase you have missing part when received the goods ,kindly feel free to contact us ,we will send them to you on shortly..
  • [IMPORTANT] "ONLY HARDWARE KIT INCLUDING, BARN DOORS WERE NOT INCLUDED.".
Check Stock

ClosetMaid 21932 Pre-Loaded 2-Inch Side Wall Brackets with Anchors for Wire Shelving, 500-Pack, White

  • 500-PACK: Professional hardware pack includes 500 Pre-Loaded Side Wall Brackets with Anchors.
  • CLOSETMAID COMPATIBLE: For use with all ClosetMaid SuperSlide and close mesh shelving with a 1-1/2 in. lip (sold separately).
  • SIDE WALL BRACKET: Supports the front lip of wire shelving where it meets the side wall.
  • DURABLE DESIGN: Heavy-duty plastic construction ensures durable support.
  • HARDWARE INCLUDED: Brackets attach to side wall with included installation hardware.
  • Preloaded wall bracket with anchor easily mounts to the side wall.
  • PROFESSIONAL HARDWARE PACK: Bulk 500-pack ideal for professionals, contractors, builders and more.
  • Measures 2-7/8 in. H x 2 in. W x 1-3/4 in. D.
Check Stock

Kolpin Stronghold Autolatch

  • Auto-latching design provides quick secure attachment of any Kolpin Stronghold products.
  • Engineered steel bracket for precision angling and attachment to vehicles.
  • Spring loaded latch with stainless steel spring.
  • Durable glass-reinforced nylon auto-latch construction.
  • Includes u-bolts and universal mounting hardware. Included Mounting Hardware: (8) Nylon Lock Nuts, M6-1.0, (8) Flat Washer, M6, (4) U-Bolt, M6-1.0 x 25mm ID x 45mm, (4) Flange Hex Bolt, M6-1.0 x 35mm LG, (1) Mounting Bracket.
Check Stock