Reviews Dust Collection Quick Connect

Dust Collection Fittings with Shop Vac Hose Adapter Accessories 4 in to 2 1/2 in plus 2 1/2 inch Vacuum Hose Adapter for Shop Vac Attachments In Your Work Shop Wet Dry Vac Attachment Exhaust Kit

  • Dust Collector Accessories for the everyday craftsman - Included are 3 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Small dust collection system. See photos for detailed measurements..
  • Connect your 4" inner diameter hose to 2 1/2" dust collection hoses.*** NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly. A rubber coupler or a short section of hose will let you connect this adapter directly to your dust collection port..
  • 2 1/2 in. Wet/Dry Vacuum Universal Tool Adapter Attachment - Made out of rubber this vacuum adapter can be cut to fit various sizes. Connect it to your wet dry shop vac accessories. If it doesn't fit apply some heat by running it under hot water. This will loosen the rubber and allow it to fit snug. Check the diameter i the photos to see what size your hose needs to be..
  • Use the shop vac attachment to connect more accessories to your dust collection system. The shop vac adapter dimensions are 2 1/2 to 1 1/4 inches. Fits most wet dry vac attachments but ***check photo for dimensions.***.
  • These 3 adapters can be used if you need a universal vac attac....
Check Stock

POWERTEC 70277 Dust Collection Reducer, 6-Inch OD to 4-inch OD

  • INCLUDES: (1) Dust Collector Hose Reducer.
  • FUNCTION: Provides a reliable connection between a 6” dust collection hose to a 4” dust collection hose (not meant for PVC pipe or other plastic fittings).
  • QUALITY BUILD: Made with premium ABS plastic for strength, durability and optimal impact resistance – commonly needed for workshop and woodworking applications.
  • FEATURES: A flange that allows for a quick connect and disassembly for your convenience.
  • DIMENSIONS: 4” Nominal end actual OD size 3.93” and ID size 3.73”, 6” Nominal end actual OD size 5.93” and ID size 5.70”.
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 5 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes Shop Vac Adapter 2 1/2 to 1 1/4 inch and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 6 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Several for a small dust collection system. Details in photos..
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly.
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61 inches OD. More details of the other adapters in photos..
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your shop dust collection system or just to connect your vacuum to an attachment(NOTE- 2 Adapters come already connected together but come apart easily)..
Check Stock

DCT 4in Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping

  • WOODSHOP DUST CONTROL: Use the DCT 4” Inch Plastic Pipe Threaded Coupler 1-Pack, Screw-On Flexible Hose Woodshop Woodworking Saw Dust Collection Piping to complete your woodshop dust control system by connecting 2 shorter pieces of 4-inch (10.2cm) plastic pipe into one longer pipe for ductwork dust collection.
  • Threaded end screws tightly into flexible hose and tapered end offers press-on attachment.
  • Ideal for use with smaller capacity, mobile dust collectors to service multiple machines.
  • HASSLE-FREE: Eliminates the need to connect and disconnect a hose clamp each time a new woodworking machine is used.
  • Takes all of the work out of disconnecting and moving or switching from machine to machine.
  • Stays secure and airtight without sliding off, decreasing airflow, or decreasing dust collection capability.
  • No special adapters for each tool required.
  • EASY TO USE: Designed to thread onto to the end of a 4-Inch flexible dust collection hose (can be tightened with wire hose clamp.
  • not included) and slide onto any 4-Inch diameter dust hood port, blast gate, the dust collector itself, or the outlet of whichever tool you are using at the time for a quick and easy fit (twist for friction lock).
  • SPECIFICATIONS: Constructed from heavy-duty hard plastic.
Check Stock

POWERTEC 70175 Dust Collection Hose with Fittings Plus Two Reducers , Black

  • PLEASE NOTE: As configured, the hose set will connect your 1”OD port tools to a shop vac or 2-1/2” dust collection system. The hose is designed to be small and flexible to help provide greater ease in sanding. Please refer to the detailed images to verify that the size and configuration fits your application or expectations. If you need to connect your shop vac or 2-1/2” dust collection system to a 1-1/2” tool port, an additional 1-1/2” screw on adapter, Powertec 70296, is available. Simply remove the 1”ID adapter and replace it with the additional 1-1/2” ID adapter.
  • INCLUDES: (ONE) 10ft dust collection hose, (ONE) 1" pliable plastic hose fitting, (ONE) 1-1/2" pliable plastic hose fitting, (ONE) 2-1/4" ABS dust hose adapter, and (ONE) 2-1/2" ABS dust hose adapter.
  • APPLICATION: Allows you to extend the reach of your shop vacuum or dust collecting power tools with a long, flexible and premium quality vacuum hose that is free roaming and able to suck up dust, dirt and debris.
  • VERSATILE: Offers a dust collection power tool hose with fittings that work with most small vacuums, shop dust collection systems, orbital sanders, joiners, jigs and other power tools. The nominal 2-1/4” adapter should fit most shop vac ports with a nominal ID of 2-1/4....
Check Stock

POWERTEC HS1002V 1/2 Sheet Variable Orbital Sander for Woodworking with Hole Punch Plate, Hook and Loop Sandpaper Pad and Dust Collection Box

  • INCLUDES: (1) Variable Speed Orbital Sander, (1) Attachable Dust Collector Quick Connect Box, (1) Paper Hole Punch Plate, and (1) 80-Grit Hook and Loop Sandpaper.
  • FEATURES: ½ sheet sander possesses a 9x4-1/2” (230 x 155mm) sanding pad, hole punch plate, hook & loop sandpaper that allows you to sand inside corners, an on/off switch and a 6-stage variable speed dial - All designed to put the control back in your hands.
  • POWER: Sander possesses a high-speed electrical motor with an impressive combination of specifications (120 volts, 2.5amps, 320 watts of rated power, and 6000-12,000 RPM) – All designed to produce tight, high precision orbital motions and professional results.
  • PREMIUM DESIGN: This double insulated tool was built with a compact, lightweight and easy-to-use design that cuts your sanding time in half. You can comfortably use this sander with one or two hands, and work long hours with an impressive low-level noise output.
  • DUST COLLECTION SYSTEM: Equipped with a built-on dust port that allows you to simply slide the included dust collection box into place for a quick and easy connection (or removal). Utilizes a microfilter system that traps fine particles as small as ½ micron to ensure cleaner air quality and a dust free workshop.
Check Stock

POWERTEC 70301 Dust Collection Cyclone Separator Lid Kit w/Flexible Hoses Clamps 2 1/2 inch Elbow & Couplers for 2 Stage Dust Collector

  • KIT INCLUDES: (1) Two Stage Cyclone Separator Lid, (1) Dust Port Elbow, (2) 3’ Flexible Hoses, (2) Quick Coupler Connectors, (2) Hose Clamps.
  • FUNCTION: Cyclone dust collection systems cause a vortex action to trap and collect dust & debris inside the bucket/ barrel before it enters the vacuum, helping to prevent a reduction of suction power..
  • FEATURES: Lid possesses a foam gasket for a tight and reliable seal, elbow fitting on the inlet side to promote cyclonic air flow, ultra flex hoses that expand from 10” to 38-3/4 inches – giving you project versatility and leverage to maneuver your way around workshop machines and space.
  • APPLICATION: Quickly and easily converts your shop vacuum and standard five-gallon buckets container into a 2-stage cyclone dust collection system. Provides the necessary fittings required to connect a shop vac with a 2-1/4” ID inlet to a 2-1/2” OD diameter machine port. Perfect for woodworking, CNC machining, workshops and more.
  • PREMIUM: All cyclone dust collector components (excluding stainless steel hose clamps) are made with super lightweight clog-free ABS plastic material known for its temperature resistance and long-term durability.
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 6 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes a Shop Vac Adapter 2 1/2 - 1 1/4 inch with Plastic Sleeve and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 7 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters.....
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed....
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61....
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your....
Check Stock

POWERTEC 70275 3-Way Dust Collection Fitting w/Y Shaped Design for 4 in Hose & Cuff

  • INCLUDES: (1) 3-Way Junction Dust Collection Fitting.
  • FUNCTION: Allows you to connect up to three individual dust collection tools or machines to one portable dust collector without having an expensive piping system set-up.
  • COMPATIBLE: This 3 way splitter features a y-shaped design with 4” nominal, actual 3-29/32”OD inlet and outlet ports (accepts most 4” ID dust collection hoses and flexible tubing). Please note that a blast gate and/ or hose clamp may be required for direct machine connection (not included).
  • VERSATILE: Works well with most dust collection tools and accessories, including band saws, belt sanders, table saws, jointers, planers and more.
  • QUALITY: This dust collector adapter is made with super durable ABS plastic, known for it’s resistance to scratches, high impact and heat.
Check Stock

Altocraft 5-Inch Random Orbital Palm Sander Machine 2.0A Electric Hand Sander with 2Pcs Sandpapers for Finishing Sanding Polishing Wood

  • 5" ORBITAL SANDER: Powerful 2.0 AMP motor delivers a continuous no-load speed of 10,000 vibrations per minute for effortless sanding to remove old finishes, smooth rough wood, or other surfaces and to prepare for a final new finish.Pad size 5-inch..
  • 2 SANDER SANDPAPER: Included 2x80-grit sandpapers with vent hole. Vent holed paper is preferred for the most efficient use of the dust extraction in the base which feeds into the high-performance dust collection bag. Self-adhesive sandpaper for easier replacement..
  • COMFORTABLE RUBBER HANDLE: Orbital sander is designed with a rubber palm grip to reduce vibration while sanding that will help eliminate fatigue and feel good in your hand..
  • DUST COLLECTION: This sander is equipped with the filtered dust collection to keep the work area clean, ideal for indoor sanding work. quick dust collection offers a cleaner grinding working and environment..
  • QUICK HEAT DISSIPATION: Sander Machine has a powerful quick heat dissipation system for a better experience and longer lifetime fine dust..
Check Stock