Reviews Dual Exhaust Tailpipe Extension

Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

JWWY Stainless Steel Exhaust Muffler Tail Pipe Trim Cover for 2015-2022 Dodge Charger Exterior Accessories

  • Package: There are two pieces of 2.5 inches inlet exhaust tips in the package..
  • Specifications: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches diameter inlet exhaust pipes..
  • Material: The Apeixoto exhaust tailpipe tip is constructed with 304 stainless steel. It has a much more shinny and beautiful surface. There is a blue burnt end on the tip. It looks very fashionable and powerful. This types of stainless steel also is rust and corrosion resistant. It will keep your vehicle always in a good look..
  • Installation: Please be noted that these tailpipes are weld on designed. A professional installation would be recommended. Good installation will make the tailpipe function better..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

idain 2.5 inch Inlet Dual Exhaust Tip Stainless Steel Polished Muffler Tail Universal Bolt-On Double Outlet Tail Pipe (Black,Curved)

  • Durable Material:Design with durable stainless steel,strong corrosion resistance,high temperature resistance,during and waterproof.
  • Dual Exhaust Tip:With dual exhaust tip, it can increase exhaust pressure and reduce exhaust noise effectively.
  • Excellent Appearance:Exquisite tail throat with stylish design and bright color, replace the traditional exhaust tip to make your car shiny and cool.
  • Universal Fit:Wipe application for 63mm/2.5 inch Inlet trucks pickup car exhaust system.
  • Easy Installation:No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
Check Stock

TOTALFLOW 214633 Y-Pipe Muffler 1500 Direct Fit Exhaust Muffler Kit 2009-2018 Dodge Ram 1500 Hemi - Stainless Steel

  • Please double check your exhaust size or information prior to placing your order to avoid restocking and inbound/outbound shipping fees.
  • Fits 09-18 Dodge/Ram 1500 Direct Fit Exhaust Muffler for 2009-2018 Dodge Ram 1500 Trucks with 5. 7L Engine and Factory Dual Tailpipe Option. 2019 Dodge Ram 1500 Classic 4th generation Ram with factory dual exhaust. Trucks with 5.7L.
  • Constructed with durable 409 Stainless Steel, fully MIG welded for long life.
  • 2009-2010 Dodge Ram 1500, 2011-2012 Dodge Ram 1500, 2013-2014 Dodge Ram 1500, 2015-2016 Dodge Ram 1500, 2017-2018 Dodge Ram 1500, 2019 Dodge Ram 1500 Classic 5.7L 4th generation Ram with factory dual exhaust. For fitment or warranty information, please refer to the manufacturer site..
Check Stock

idain 2.5 inch Inlet Dual Exhaust Tips Muffler Tip,Chrome Heart-Shaped Exhaust Tip,Universal Bolt-On Double Tube Exhaust Muffler (Neon,Straight)

  • Durable Material:Design with durable stainless steel,strong corrosion resistance,high temperature resistance,during and waterproof.
  • Dual Exhaust Tip:With dual exhaust tip, it can increase exhaust pressure and reduce exhaust noise effectively.
  • Excellent Appearance:Exquisite tail throat with stylish design and bright color, replace the traditional exhaust tip to make your car shiny and cool.
  • Universal Fit:Wipe application for 63mm/2.5 inch Inlet trucks pickup car exhaust system.
  • Easy Installation:No weld and drill needed. Just fix the screw to the appropriate location of tailpipe by Wrench.
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5" Inlet 3" Outlet 9.5" Long Chrome Polished Stainless Steel Double Wall Exhaust Tail Tip for 2.50" Outside Diameter Tailpipe, 2 1/2 Inch Exhaust Tip, Weld On

  • universal fits 2.5" outer diameter of trucks car exhaust tailpipe (please make sure the outlet outer diameter of your vehicle tailpipe is 2.5" before purchase).
  • Anti-deformation & rustproof: Built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • plus, a drainage hole helps drain water to prevent rust.
  • Stylish & pleasant-sounding: Sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound.
  • meanwhile, polished finish offer your car with a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock

IFOKA 2.5 Inch Inlet Exhaust Tip , 2.5' Inlet x 3' Outlet 6 Inch Long Diesel Exhaust Tips, Stainless Steel Polished Finish Exhaust Tailpipe Extension, Clamp-on Design

  • Dimension: Exhaust tips 2.5 inch inlet, 3 inch outlet, 6 inches overall length. Note: Fits tailpipe with 2.5 inches outlet diameter only, please measure the outlet diameter of your pipe before purchase.
  • Material: Stainless steel with mirror polished surface treatment, anti-corrosive, high temperature resistance, and not easy to scratch & fall off. Prevent the original exhaust tailpipe from sun and rain..
  • Easy to install: Cleaning tailpipe and exhaust tips, unscrew the bolt but not remove it, slide the tip into place on the tailpipe, move the clamp to a place flush with the entry port, then tighten the screw and clamps..
  • Unique Driving Pleasure: Rolled edge and angled cut design, and elegant chrome can perfectly decorate your vehicle. Thicker inner waller design makes the vehicle sounds rumble and crackle, give you the unique driving pleasure..
  • Rustproof Design: There is a drainage hole on the bottom of the exhaust tips, not easy to accumulate water and avoid rust effectively. In order to prolong the service life of the product, clean up once a month..
Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

  • 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
  • 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
  • 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check Stock

Crush Proof Tubing 3' Service Station Kit

  • CRUSHPROOF- Even the heaviest vehicles won’t smash it.
  • VERSATILE- Kit includes adapters so two hoses can be connected to make a longer length, can be set up for single or dual exhaust vehicles.
  • HEAVY DUTY- More heat resistant and flexible than standard hoses, withstands up to 600 degrees F.
  • GREAT FOR- use on passenger car tailpipes 2-1/2-Inches or smaller in diameter, or use a tailpipe adapter to fit with other pipe sizes.
  • SPECS- Kit includes (2) 3″ x 4′ FLT300 Crushproof Hose.
  • (1) RY30 Y-Connector for 3″ Hose (Rubber).
  • (2) F300 3″ Tailpipe Adapters with Hook & Chain.
  • (1) SP30 3″ Rubber Splice Connector – connects two lengths of hose.
Check Stock