Reviews Double Insulated Welding Cable

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

  • Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

T TOVIA Stick Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 200 Amp

  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems..
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications..
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end..
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections..
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle..
Check Stock

Welding Electrode Holder Cuwiny 300AMP High Quality Copper Electrode Clamp Jaw Holding Plier Fit for ARC Welder Welding Machine Stick Electrode Welding American Design

  • This Electrode holder is Made of high quality Copper materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection. (New product promotion, only this week. Reviews and feedback, contact us for 20% off.).
  • Used # 1 AWG Gauge Cable and High-quality Copper..
  • Fit for Arc Welder 200A 300AMP etc,Suit for various kinds of Stick Welding Rods Electrodes etc..
  • The high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Satisfactory after-sales service:Cuwiny products have 1 Year after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

  • ... air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
  • brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

MULMART 15 FT H100S2-10 (245924) H-10 MIG Welding Gun 100Amp Welding Torch Stinger Replacement for Hobart Handler 130XL, 135, 140, 175, 187 and AutoArc XLT142 & XLT182

  • 【Feature】One-piece modular trigger assembly-Molded out of high heat resistant material to withstand head and spatter and ensure long life. Gun tube design-Armored with an electrically insulated metal jacket optimizing fine wire welding performance. Abrasion-resistant,extruded rubber jacket-Adds strength and long life to the cable. Classic curved handle-Lightweight and balanced, providing a comfortable grip to reduce fatigue.
  • 【Wide Applications】Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications.
Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

  • Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
  • Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
  • 100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..
Check Stock

MULMART 15FT M-150 M-15 M15 M150 MIG Welding Gun Welding Torch Stinger Replacement for Miller 150A,Millermatic 90, 35/120 / 130 / 130XP /135 / 140s / 150/175 / 180s /185,Hobart IronMan 210

  • Duty Cycle: 100% with CO2 Gas, 60% with Mixed Gas.
  • 【Feature】One-piece modular trigger assembly-Molded out of high heat resistant material to withstand head and spatter and ensure long life. Gun tube design-Armored with an electrically insulated metal jacket optimizing fine wire welding performance. Abrasion-resistant,extruded rubber jacket-Adds strength and long life to the cable. Classic curved handle-Lightweight and balanced, providing a comfortable grip to reduce fatigue.
  • 【Wide Applications】Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto-body work and light maintenance or repair applications.
Check Stock

RAPICCA Welding Gloves 16 Inches,932℉,Heat Resistant Leather Forge/Mig/Stick Welding Gloves Heat/Fire Resistant, Mitts for Oven/Grill/Fireplace/Furnace/Stove/Pot Holder/BBQ/Animal Handling-Grey

  • 【EXTREME FOUR LAYER HEAT RESISTANT PROTECTION】 Outermost layer: Double layer kevlar padding leather. Intermediate layer: a composite product by laminating a kind of high temperature resistant Air-isolated Aluminum Foil and a flame retardant cotton cloth . Inner layer:a 100% soft insulated cotton lining. Flame retardant thread stitching for advanced heat and cold resistance, sweat absorbent, breathable, allergy free. These gloves are guaranteed to withstand extreme temperatures up to 932°F(500℃).
  • 【SUPERIOR SECURITY FOR FORERAMS】 - The 16 inches extra long glove with 7.5 inches long sleeve protect your forearms from grinding debris, welding sparks, hot coals and open flames, hot kitchen ware and hot steam. Effective even in extreme environments. Recommended for Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW), forging or other high temperature applications, Provide the most extreme heat protection..
  • 【EXTREME WEAR RESISTANT PROTECTION】- The Gloves are made from 1.5mm thick and soft shoulder split natural cowhide leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, ....
Check Stock