Reviews Display Single Digit Led

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

4-digit LED display module with LED brightness adjustable and clock point..
Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..

1 Microframe Model 5120 2-Digit LED Display with Power Adapter and 18ga, Two conductor wire. | 9.1-inch LED Display with 5.5-inch digits..
1 B80 Ticket Dispenser with mounting bracket and hardware. | 1 Take-A-Number Sign.
1 B80 Ticket Dispenser Counter Top Stand with mounting hardware..
1 Roll of White 2-Digit Tickets (3,000 tickets per roll) | 2 Brass Push Buttons with 40 feet of 22ga, Two conductor wire. | 1 Wireless infrared remote control (batteries included)..

These LED display digital tubes are used widely in home appliances, instruments, accessories, etc..
Package Contents: 10Pcs x 1-Digit LED Tube, 5Pcs x 2-Digit LED Tube.
Made of plastic material, strong and durable, light weight, good impact resistance..
Easy to install, the center pins are the Cathode. Connect one or both center pins to ground, and each other pin is the power for the display..
Please make sure you know how to connect before buying.

The 88-note, GHS weighted action is heavier in the low keys and lighter in the high keys, just like an acoustic piano.
Class-compliant USB audio/MIDI for true "plug and play" connectivity without installing any drivers.
Motif sound engine: layer, zone, switch, cycle, randomize and control up to 8 elements within a single voice.
Virtual circuitry Modeling (vcm) re-creates the sound and behavior of vintage effects and signal processors.Display 3 digit LED + 20 x 2 line character LCD (backlit).
128 notes of polyphony ensures dropout-free performance playing live or with full 16-track sequences.

Can be used in Arduino project and other micro-controller development boards as output indicator..

Star Lite faceplate makes all lettering glow in the dark.
Large, easy-to-read meter with scales for power output, modulation, SWR and incoming signal.
Five-digit frequency counter and two-digit channel display using large blue LEDs , variable power output control, variable talkback circuit with on/off switch.
Automatic SWR circuit with an SWR alert LED, Roger Beep circuit with on/off switch.
Variable dimmer control, frequency display on/off switch, 3-position tone switch for receive.

DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
WIDE APPLICATION: This module is suitable for Raspberry Pi 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

... GREEN, BLUE, WHITE, AMBER + ULTRA VIOLET). DMX control: 6 or 10 channels. DMX input and output (3 pin). 50,000 hours life expectancy. IRC wireless remote control included. Super bright: 6500 lux @1m (way brighter than others on the market).
Large color 4-digit digital LCD display for easy color mixing & operating. Our interface is the easiest to use on the market. Easy to operate with the large LCD display, remote control, DMX controller, built in programs, and sound activated mode. Easy color mixing on one screen. LED angle: 30 degree (+ or 5). Built in 7500 mAh lithium battery. Battery indicator on LCD display so you know how much longer your battery will last. Single Color run time Red: 24 hours, Green: 22 hours.
Double Color run time: 15 hours. All Colors run time: 12 hours. Recharge Time: 10 hours. Battery will still perform optimally even after hundreds of charging cycles. Battery overcharge protection. Power supply: AC110V-220V/50-60Hz. Power consumption: 25w. Automatic modes: color change, strobe, dimmer, gradual color change, jump change, sound activated. Flicker Free lights. Colors: 16.7 million colors. 1-year warranty. Black Housing. Create customize....

... GREEN, BLUE, WHITE, AMBER + ULTRA VIOLET). DMX control: 6 or 10 channels. DMX input and output (3 pin). 50,000 hours life expectancy. IRC wireless remote control included. Super bright: 6500 lux @1m (way brighter than others on the market).
Large color 4-digit digital LCD display for easy color mixing & operating. Our interface is the easiest to use on the market. Easy to operate with the large LCD display, remote control, DMX controller, built in programs, and sound activated mode. Easy color mixing on one screen. LED angle: 30 degree (+ or 5). Built in 7500 mAh lithium battery. Battery indicator on LCD display so you know how much longer your battery will last. Single Color run time Red: 24 hours, Green: 22 hours.
Double Color run time: 15 hours. All Colors run time: 12 hours. Recharge Time: 10 hours. Battery will still perform optimally even after hundreds of charging cycles. Battery overcharge protection. Power supply: AC110V-220V/50-60Hz. Power consumption: 25w. Automatic modes: color change, strobe, dimmer, gradual color change, jump change, sound activated. Flicker Free lights. Colors: 16.7 million colors. 1-year warranty. Black Housing. Create customize....