Reviews Digital Time Relay

12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display

  • 4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications..
  • WIDE ADJUSTABLE TIMING RANGE: This off delay relay supports widest timing range, 0.1 seconds to 999 minutes adjustable, which can fulfilled your various need..
  • STRONG ANTI-INTERFERENCE ABILITY: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption..
  • SUPER SIMPLE OPERATION: Our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value..
  • AUTOMATIC SAVING FUNCTION: After you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient..
Check Stock

KNACRO -20~60℃ 10A XY-TR01 Digital Temperature Humidity Control Module Controller High Precision

  • Temperature and humidity control module high precision digital display word double output automatic constant temperature and humidity control panel.
  • Product adopts industrial-grade chip, high-precision SHT20 temperature and humidity sensor..
  • Parameter remote read/set: Through the UART, set the starting temperature/humidity, stop temperature/humidity, temperature/humidity correction parameters.
  • temperature/Humidity Real-time reporting: If the temperature/humidity reporting function is turned on, the product will detect the temperature/humidity and relay status by the 1s interval, and pass the UART to the terminal to facilitate data collection.
  • Relay enabling (by default): If the relay is disable, the relay remains disconnected.
Check Stock

Two Position Low V Actuator w/End Switch

  • Output: fan relay, alarm relay and 4-20ma current loop.
  • Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
  • Mounts on a standard 4” x 4” electrical box.
  • 5 a spdt fan relay controls starters of exhaust fans.
Check Stock

Timer Relay, Icstation Time Delay Switch AC 110V 120V Timer Switch Module Digital Time Cycle AC 85V-265V LED Display 0ms-999h

  • ⏳Wide timing range: ICStation time relay delay is able to tolerate the widest timing adjusting range: 0-999S/ 0-999M/ 0-999H,it is available for various application.(Please Note: If the T1 time is second,the T2 time must be second. They can not achive T1 time is second and T2 time is minute/hour.).
  • ⏳ Wide supply voltage range: Icstation timer relay supports AC85-265V. This device can support different work mode, If you are not clear the operation, please download the PDF user manual or Email us..
  • ⏳Cycle Timer relay supports sleep working mode, which will turn off automatically after 10s(need to set ). It is also very easy to set parameter via 4 momentary keys..
  • ⏳Parameter:Cycle Timer relay Support Voltage Input: AC85-265V, Maximum Power: .
  • ⏳Application:The Digital timer delay can be used for timing, delay, cycle timing, intermittent timing occasions and so on, such as the descending machine DIY, timing switch, timing alarm control board. Kindly Tips: We have uploaded the user manual on the Amazon page at technical specification or under the IMAGE, please download it and read it before you use it..
Check Stock

Macurco TX-12-HS White Hydrogen Sulfide H2S (Line Voltage) Fixed Gas Detector Controller Transducer with White Housing

  • Output: fan relay, alarm relay and 4-20ma current loop.
  • Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
  • Mounts on a standard 4” x 4” electrical box.
  • 5 a spdt fan relay controls starters of exhaust fans.
Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

  • 【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
  • 【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
  • 【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
  • 【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
  • 【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..
Check Stock

DUNSI STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

  • 【HIGH QUALITY】DUNSI premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
  • 【MAIN SPECIFICATION】DUNSI Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
  • 【OPTIMAL PERFORMANCE】DUNSI premium upgrade STC-1000 Temperature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
  • 【WIDE APPLICATION】DUNSI STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, acceler....
Check Stock

CENTAURUS STC-1000 Temperature Controller Waterproof Sensor Heating Cooling LED STC1000 STC-1000 Digital Dual Relay Thermostat Incubator Aquarium 110 Volt AC 110V 2m Fahrenheit Temp Control

  • ...erature Controller has 2 Relays.Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time.No more frequently wirring change between heater and cooler. Every piece of our products is strictly inspected before sale..
  • 【HIGH QUALITY】CENTAURUS premium STC-1000 Digital Temperature Controller is made of high quality ABS heavy-duty and anti-flamming plastic shell material which can use for a long time.designed with compressor delay protection, it will alarm when temperature exceeds temperature limit..
  • 【MAIN SPECIFICATION】CENTAURUS Digital Dual Relay Thermostat (110v) Keeps temperaure in desired range and guaranteed accuracy.Fully utilize the stc microcontroller and NTC probe to this controller has great accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W. Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC)..
  • 【WIDE APPLICATION】CENTAURUS STC-1000 Dual Relay Thermostat Controller with 2m Waterproof probe can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination.It's on/off control mode. Turn....
Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

  • Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
  • 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
  • 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
  • Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
  • With Optical Coupling Isolation,Triggering More Reliable and Stable.
  • 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.
Check Stock

Macurco TX-6-AM Ammonia NH3 Low Voltage Fixed Gas Detector Controller Transducer

  • Fan relay actuation: Selectable from 15 to 75 ppm Nh3.
  • Output: fan relay, alarm relay and 4-20ma current loop.
  • Controls: Digital display (0-100 ppm), buzzer, fan Delay, fan minimum runtime.
  • Mounts on a standard 4” x 4” electrical box.
  • 5 a spdt fan relay controls starters of exhaust fans.
Check Stock