Reviews Data Radio Module

PAC C2R-CHY4 Radio Replacement Interface for Chrysler,Blue,8.75in. x 9.00in. x 2.00in.

  • Replacement interface harness for select Chrysler vehicles with CAN Bus.
  • Compatible with amplified or non-amplified systems.
  • Single wire output for steering wheel control module.
  • VSS, illumination, parking brake and reverse trigger output.
  • Radio replacement interface for Chrysler vehicles retains all warning chimes including back-up chimes, memory seats, low fuel, door/hatch ajar & other functions..
  • 2005-11 Chrysler Radio Replacement with SWI-CAN, SWI-CAN2 Modules Included.
Check Stock

Electronics-Salon DIN Rail Mount 8 SPDT Power Relay Interface Module. (Operating Voltage: DC 5V)

  • Voice/Data Expansion Module - Data/Voice Expansion Module for professional distribution of phone lines..
  • Voice/Data Expansion Module features include:.
  • Bridges up to 4 telephone lines to 11 locations.
Check Stock

Legrand, Home Office & Theater, Network Switch, Platinum Grey, 12 Port, AC1014

  • NETWORK INTERFACE MODULE: 12 port Cat 5e network interface module has high density mini patch panel..
  • SWITCH BETWEEN DATA AND VOICE APPLICATIONS: Easily switch an outlet from Voice to Data or from Data to Voice with this Cat 5e Network Interface Module..
  • CAT5e SPECIFICATION: It meets Cat5e specifications and RJ45 ports are labeled 1 thru 12..
  • AVAILABLE SIZE: The network module has two different size – 6 port, 12 port..
  • AVAILABLE STYLE: It has two different specification – Cat 5e, Cat 6.
Check Stock

Drone Racing League: 2017 eSports Tryouts

  • 【FPV Simulator】This transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE.
  • 【About Bind】The stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0.
  • Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you..
Check Stock

Honeywell LYNX Touch 5210 4.3\ All-in-One Wireless Home and Business Alarm Control System

  • WiFi & ZWAVE Compatible (SOLD SEPARATELY - NOT INCLUDED).
  • L5210 All-In-One Home and Business Control System.
  • Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    Up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks – Jammed locks reported to Honeywell Total Connect Remote Services 40 devices such as lights, switches and lamp modules 20 scenes 20 rules or event-based actions 20 schedules or time-based actions Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices.
  • Honeywell 3GL Communications GSM radio (SOLD SEPARATELY - NOT INCLUDED) – protocol supports AT&T and Rogers networks ADEMCO Contact ID Reporting (four or ten digit account numbers) SIA Format Reporting Internet central station communication with L5100-WIFI or ILP5 module GSM cellular central station communication with internal GSM radio Selection for primary communication path when using dual paths Touch activated radio registration GSM....
Check Stock

AURSINC SHARI PiHat - Portable SA818 Ham Allstar Radio Interface Compatible with Raspberry Pi 2/3/4 | Raspberry Pi Hosted Allstar Node | UHF Frequency Range 1W 420-450MHz/70cm | Amateur Radio Operator

  • ... Ham Allstar Radio Interface) is designed for construction and uses in the amateur radio service, works with a Pi2/Pi3 or Pi4, SHARI RF output power is 500 to 1000(default) milliwatts.
  • [Allstar Node] SHARI PiHatU implements a Raspberry Pi hosted Allstar node using a NiceRF SA818 embedded UHF (420-450 MHz|70cm) radio module.
  • In order to create an Allstar node, SHARI plugs into two USB jacks on a Raspberry Pi2/Pi3 or Pi4 for power, the Allstar interface and radio programming (a short M/F USB extender cable can be used if desired) ；Note: only work with allstar node or any analog node.
  • [Power Supply] SA818 Ham Allstar Radio Interface is a power supply intended for the version of the Raspberry Pi. These supplies typically provide 5.1 to 5.2 VDC to the Pi. Current requirements vary with version. Numerous problems with Allstar Nodes have been traced to inadequate power supplies..
  • [Feature 1] Front panel LEDs indicate the status of SHARI-POWER (green), USB Audio CONNECTION STATUS (blinking green), COS (green) and PTT (red).
  • SHARI PiHat uses 5 volts from the Pi, and the best place to measure it is from pin 8 (+5) to pin 9 (GND) of the SA818 module.
  • [Feature 2] SHARI PiHat uses a single circuit board which contains installed surface mount (SMD) parts as well as ....
Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • 【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
  • 【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
  • 【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
  • 【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
  • 【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.
Check Stock

Hikity Android Car Stereo Double Din 7 Inch Touch Screen Car Radio in Dash GPS Navigation Bluetooth FM Radio with Dual USB WiFi Mirror Link for iOS/Android Phones

  • ...llation size is 7.01"(l)*3.94"(h)*1.89"(w), suitable for most general purpose 2 din car center console, quad core. High Quality 7 inch capacitive 2.5D tempered glass touch screen with high resolution 1024*600. Support car original steering wheel remote control..
  • 【GPS Navigation & WiFi】Car audio receiver with GPS module, offline maps on pre-installed app, you just need to connect WiFi/Hotspot to download offline map data for free. With a WiFi connection, online maps work perfectly, and you can also download apps from the play store, such as YouTube, Tiktok, Spotify, and more, which can enrich your car life!.
  • 【Bluetooth & Mirror Link】This Android Radio with built-in Bluetooth, support Handsfree Call, Phone book synchronization and Stream Music Play. Mirror Links For Android and iOS smartphones, you can synchronize the phone screen on the stereo screen to enjoy playing multimedia content on a larger screen..
  • 【Rear View Camera & DVR Function】7 inch android radio support waterproof night vision HD reversing camera, when connected, when you pull reverse gear, the car screen will automatically show the rear view. This car radio also supports Dash CAM input, there are two USB port, you also can connect a usb dash cam to it..
Check Stock

Single Din Car Stereo Android Head Unit Car GPS Navigation System in Dash Detachable 1 Din 7 inch Capacitive Touchscreen Stereo Quad Core with WiFi Bluetooth Support USB/SD SWC1080P Mirror Link

  • ...h quality radio, available to listen to news, traffic information any time. AM Frequency range:520KHz-1700KHz,FM Frequency range:87.5-108 MHz. This android head unit support voice guidance, 2D/3D map, offline map support free update for the lifetime..
  • ☃ GPS Navigation system:Single din car stereo built in GPS module, GPS map data and software preloaded already, you can use offline map directly once complete installation. Also, the android head unit support online map, compatible with most gps apps, like waze, etc, you can download them on android market. Dual zone: YES, Radio/Bluetooth/USB play & Working Same Time While GPS Working..
  • ☃ Bluetooth Wireless Technology: This android car stereo built-in latest bluetooth 4.0 version allows hands-free calling and audio streaming.Head unit Support 1080P video, and multi media parameters supported. Music Format: MP3,WMA,AAC,RM,LFAC etc.Video Format: MPEG-1/2/4,H264,H263,VC1,RV,RMVB,DIVX,VP8,etc. Picture Format: JPG,BMP,JPEG,GIF,PNG..
  • ☃ EasyConnection: Any content from Android or iOS smartphone can be mirrored onto the single din car stereo. the screen on your phone can be mirrored to this Android head unit, you can choose to read messages, watch videos or online navi maps on the bigger screen instead ....
Check Stock

2Pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial Transceiver Module Bi-Directional Serial Support Slave and Master Mode

  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
  • Operating voltage: 3.3V(Note:SPP-CA Bluetooth module serial port level to 3.3V, if connect 5V level,the system needs to increase the level conversion....
  • Small size, low power consumption,high sensitivity for send and receive.
  • Allows your device to both send or receive the TTL data via Bluetooth....
  • Defaults: Salve, baud rate 9600, Bluetooth name HC-06, pairing password 1234, LED status light on.Core module uses HC-06, leads from the module....
  • Applications: The Bluetooth module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial....
Check Stock