Reviews Cv Joint Crimping Tools

Tabazy CV Joint Banding Tool with Cutter, Ear Clamp Pliers with 8pcs Single Ear CV Boot Clamps Tool Kit,

  • Crimping Plier Tool: Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps..
  • CV Joint Clamp Banding Tool: Made of high quality steel, use with banding straps up to 10mm (0.39in) wide, 0.6mm(0.02in) thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. (NOTE: The banding straps are not included, only ear crimp clamps shown in the picture are included. ).
  • Material of Ear Clamp: The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage..
  • Ear Clamp Size Are Adjustable: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275" (7mm) in width &....
Check Stock

Heavy Duty CV Boot Clamp Pliers Joint Tool Ear-Type Clamp Crimping Removal with a 1/2' Torque Wrench Universal Fit VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles

  • The CV Boot Clamp Pliers Tool is perfect Tool for Ear-Type Clamp Crimping or Removal on VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps..
  • Constructed from heavy-duty steel with comfort grip handles.
  • Perfect fit all ear-type clamps including GM FWD outboard CV joints, also suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems..
  • Equipped a "straight" crimper pliers on the end allows this CV Boot crimping on clamp ears to greatly prevent leakage..
  • Easily crimp the loop and then push down on the crimp to lock into place. 1/2" square holes allow you to use with a 1/2" extension handle or torque wrench..
  • 100% MONEY BACK GUARANTEE. Buy with no risk..
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • 【Slide Hammer Puller Set with Plastic Suitcase】: This kit include: 1 heavy duty slide hammer.
  • 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry..
  • 【 Perfect Joint Fork】 ： This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • 【Slide Hammer Made of Heavy Steel】The slide hammer and the CV joint fork is made of heavy-duty steel, which can withstand huge pressure without deformation, is not easy to break, and is more durable. The sliding distance is 19.5 inches, and the weight is 10 pounds .The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】：With thi....
Check Stock

YuangTow Universal Stretch CV Boot Tool Installation Mount Cone for Fitting Boots With A Smooth Surface Cars Accessories Plastic Auto Replacement Parts, 1 PCS, Black, 13.07 x 4.84 4.37 inches

  • ★Function:Universal fit CV boot air tool,Sure makes changing CV boots on 4 wheelers very easy as you don't have to disassemble joint,saves a lot of time when replacing outer CV boots..
  • ★Material:CV removal tool made of high quality steel,rust proof, and strong toughness to ensure durability and reliability.
  • ★Multipurpose:CV boot tool can be used for Vtt,Toyota Corolla,Audi,BMW,saves time and labor easy to use anyone with UTV OR ATV will find this product great..
  • ★Design: Simple one button operation expands the CV boot in seconds to fit the CV joint and can be supplied separately or used with CV dust boot, grease and clamp.
  • ★We are specialized in producing various tools, please go find all kinds of tools fittings you need in LAJIAOZ store .Customer satisfaction is our top priority,if there anything missed or broken,pls let us know,we'll reply within 24 hours.
Check Stock

Beck/Arnley 103-2958 Constant Velocity Joint Boot Kit

  • ...p】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers..
  • ☛ 5, 【What You Get 】----- In this kit, You will get 4Pcs Small CV Boot Cla....
Check Stock

ROADFAR CV Joint Boot Kit Inner 1999-2005 for Polaris Sportsman 500 700

  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle..
  • ☛ 3, 【With 2Pcs CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers..
  • ☛ 5, 【What You Get 】----- In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 2Pcs CV Joint Boot Clamp Plie....
Check Stock

2 Pack Compatible/Replacement Calculator Ink Roller Black/Red IR-40T CP13 for Canon P23-DH V P27-DH and More

  • ☛ 1, 【Brand Advantage 】----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality....
  • ☛ 2, 【With 8Pcs CV Boot Clamp】 ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and....
  • ☛ 3, 【With Ear Clamp Pliers and CV Joint Boot Clamp Pliers 】 ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and....
  • ☛ 4, 【Easy To Use】 ----- Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and....
  • ☛ 5, 【What You Get 】----- In this kit, You will get 4Pcs Small CV Boot Clamps(Height: 7mm), 4 Pcs Large CV Boot Clamps(Height: 9mm), 1Pcs CV....
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

Tabazy CV Boot Clamp Pliers CV Joint Ear Clamp Banding Tool Set with 12pcs Adjustable Axle Boot CV Joint Bands Drive Axle Shaft Joint Crimp Clamps Fit for Most Cars

  • FEATURES: The CV Joint Boot Clamps Pliers Car Banding Tools Kit is a perfect combination pliers for fast and simple tensioning and securing of CV boot banding strap, including a built-in cutter and winding mechanism, which can quickly and effectively tighten and cut the strapping..
  • APPLICATION: The CV joint clamp banding tool and CV boot clamp pliers is suitable for ear-type hose clamps on fuel, cooling systems and vacuum hoses, and can be used for any strapping with a width of not more than 10mm..
  • CRAFTS: The head of the pliers adopts quenching process, which has better hardness and long service life. The pliers handle adopts non-slip design, it is more powerful to hold..
  • CLAMPS SIZE: Small- Adjust diameter from 0.78-1.96 inch(20-50mm), 0.275″ (7mm) in width & 0.023″ (0.6mm) in thickness, Large-Adjust diameter from 1.96-4.72 inch(50-120mm), 0.354″ (9mm) in width & 0.031″ (0.8mm) in thickness..
  • WHAT YOU’LL GET: 1x CV Joint Ear Clamp Banding Tool, 1x CV Boot Clamp Pliers, 12pcs Clamps (6pcs small cv boot bands and 6pcs large cv boot bands), same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us!.
Check Stock