Reviews Cv Joints

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

Ear Type CV Joint Boot Clamp Plier

  • Performance Tool Ear Type CV Joint Boot Clamp Pliers (W83013).
  • For all ear-type clamps including GM FWD outboard CV joints..
  • Ideal for installing clamps fuel filters.
  • Great for CV joint boots and other cooling system hoses.
  • Heavy duty steel and no-slip grip construction.
Check Stock

Stainless Steel Universal Adjustable AXLE CV Joint Boot Crimp Clamp Kit,24PCS 12pcs Small+ 12pcs Large

  • HIGH QUALITY: The cv boot clamps is made of non-magnetic 304 stainless steel for long durability and reliability..
  • APPLICATION: It can be used on drive & CV Axle. A perfect replacement for your car broken drive shaft CV boot clamp..
  • Size: Large-Width: 0.352" (8.95mm),Thickness: 0.033" (0.85mm), Small-Width: 0.273" (6.94mm),Thickness: 0.023" (0.58mm)..
  • Easy Installation: Easy to Install. Suitable for left , right, front and rear CV joints on most cars and light commercial vehicles..
  • WHAT YOU'LL GET: 12 Pcs Small CV Boot Clamps+ 12 Pcs Large CV Boot Clamps, Place order with 100% confidence, we provide 1 click refund for our valued....
Check Stock

OMT Inner CV Axle Puller Tool Set with 5/8"-18 Slide Hammer & Adapter | Inner CV Joint Removal Tool Kit | Front Wheel Drive Axle Puller Set Compatible with Taurus Sable FWDs from 1986 to 2021

  • PULL CV JOINTS & AXLES: This CV joint puller tool set by Orion Motor Tech is compatible with Ford Taurus and Mercury Sable models from 1986 to present, loosening and removing their front wheel drive axles and hidden retaining rings in minutes.
  • MULTIPURPOSE SLIDE HAMMER: Our slide hammer weighs 7 pounds for extra strength to give you a straight and even pull for damage-free removal of the axle assembly.
  • its threading also lets you use it with other 5/8"-18 adapters to deal with other makes and models or to handle other work around your engine.
  • DURABLE PULLER ADAPTER: The U-shaped CV joint fork has a 2-inch opening and 2.4-inch depth to firmly lock onto your Sable or Taurus axle assembly, making removal of stuck CV joints a cinch.
  • QUICK & EASY OPERATION: These automotive tools work together to provide straight and even force so your constant velocity axle pops out smoothly, leaving the roller bearing inside the joint and the rest of your vehicle untouched.
  • BUILT TO LAST: Made of premium AISI 1045 medium carbon steel, our CV joint removal set provides strong and dependabl....
Check Stock

Sixity 2003-2008 for Yamaha 660 Grizzly 4X4 Rear Left Axles Back Driver YRM660FGHX GX Complete Side

  • Note: YRM660FGHX GX. INSTALL FAST, RIDE FAST: Sixity XTA Axles arrive fully assembled including inboard and outboard universal CV joints for quick installation.
  • TAP INTO THE POWER OF CHROME-MOLY: chrome-moly is a steel alloy made of chromium (the hardest metal on the Mohs scale) and molybdenum. At 200 percent stronger than standard 1020 stainless steel, and 92 percent stronger than 4130 chrome-moly, the 4340 chrome-moly steel bar showcases high strength-to-weight ratio, exceptional tensile strength, and formidable impact resistance in order to withstand extreme levels of torque and ensure durability through the roughest terrain.
  • RIDE WITH OFF-ROAD-TOUGH CV JOINTS: the heavy-gauge neoprene boots are made of an elastic compound much more difficult to puncture than rubber, and they vastly outperform thermoplastic boots in flexibility and environmental protection, delivering abrasion resistance, longer wear life, and oil/grease resistance.
  • PUT IT TO THE TEST: recommended for intense mudders, the Sixity XTA axles feature induction heat-treated bearings that reduce friction and increase CV-joint strength and durability. High-temperature and high-load-bearing moly grease packed into the boot helps to ensure long-lasting CV-joint life.
Check Stock

Sixity 2003-2008 for Yamaha 660 Grizzly 4X4 Rear Right Axles Back Passenger YRM660FGHX GX Complete Side

  • Note: YRM660FGHX GX. INSTALL FAST, RIDE FAST: Sixity XTA Axles arrive fully assembled including inboard and outboard universal CV joints for quick installation.
  • TAP INTO THE POWER OF CHROME-MOLY: chrome-moly is a steel alloy made of chromium (the hardest metal on the Mohs scale) and molybdenum. At 200 percent stronger than standard 1020 stainless steel, and 92 percent stronger than 4130 chrome-moly, the 4340 chrome-moly steel bar showcases high strength-to-weight ratio, exceptional tensile strength, and formidable impact resistance in order to withstand extreme levels of torque and ensure durability through the roughest terrain.
  • RIDE WITH OFF-ROAD-TOUGH CV JOINTS: the heavy-gauge neoprene boots are made of an elastic compound much more difficult to puncture than rubber, and they vastly outperform thermoplastic boots in flexibility and environmental protection, delivering abrasion resistance, longer wear life, and oil/grease resistance.
  • PUT IT TO THE TEST: recommended for intense mudders, the Sixity XTA axles feature induction heat-treated bearings that reduce friction and increase CV-joint strength and durability. High-temperature and high-load-bearing moly grease packed into the boot helps to ensure long-lasting CV-joint life.
Check Stock

Universal Standard CV Boot & Cone Kit Stretchy Drive Shaft Boot Fitting Tool

  • Made of high quality plastic material, durable and practical to use.
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

East Lake Axle replacement for front left cv axle Arctic Cat 550/650 / 700 Prowler 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015

  • 1, 【What Will You Get】We prepared 12Pcs small stainless steel cv boot clamps and 12Pcs large clamps for fixing cv boots in this kit!.
  • 2, 【Wide Application】Suitable for inner or outet CV joints on most cars and light commercial vehicles, 100% brand new , professional manufacturing, steel clamp is the best replacement for your old one. A perfect replacement for your car broken drive shaft CV boot clamp..
  • 3, 【Simple to Use 】There is the band that goes round the boot, and then a part of it sticks up like a upside down U and the rest of the band clips into place over the other end of the band making a full loop. You get it as tight as you can then use the pliers to pinch the U shut to tighten it the rest of the way. This would be easier with a drawing..
  • 4, 【 High Quality】The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
  • 5, 【100% Satisfaction Guarantee 】 We promise to provide every customers with 100% satisfying shopping experience. If you come across any issues during use our products, please feel free to contact us by email, we will be here to help..
Check Stock

East Lake Axle replacement for Front cv axles wheel bearings & seals set Honda TRX 500/650/680 2005 2006-2020

  • Please verify your year, make and model in the product details before purchasing..
  • OEM Replacement. Brand New Complete CV Axle Assembly and Wheel bearing.
  • Fully Assembled inboard / outboard cv joints with neoprene boots.
  • 1 Year Warranty (excludes lift kits & torn boots).
Check Stock